[flashrom] [coreboot] utililty output for Gigabyte EG45M-UD2H

[Joachim Ernst]

Hi,

output for EG45M-UD2H attached.

I was trying to read from the flash:

sudo flashrom -r backup.bin
flashrom v0.9.0-r667
No coreboot table found.
Found chipset "Intel ICH10R", enabling flash write... OK.
This chipset supports the following protocols: LPC,FWH,SPI.
(Calibrating delay loop... OK.
Found chip "Macronix MX25L8005" (1024 KB, SPI) at physical address
0xfff00000.
Reading flash... done.

But the output doesn't match with the vendor supplied biosfile.
Maybe I'll backup the BIOS from a windows tool, and check, if these are
the same. Or the dualbios is the culprit of this behaviour.

Regards,
Joachim

Carl-Daniel Hailfinger schrieb:
> Hi Joachim,
> 
> thanks for your reports.
> 
> Could you please rerun latest flashrom compiled from subversion
> (revision 667) on all these boards and mail the output to
> flashrom at flashrom.org
> Thanks!
> 
> Regards,
> Carl-Daniel
> 

-------------- next part --------------
An embedded and charset-unspecified text was scrubbed...
Name: flashrom-v.txt
URL: <http://www.flashrom.org/pipermail/flashrom/attachments/20090728/17f7d350/attachment.txt>
-------------- next part --------------
An embedded and charset-unspecified text was scrubbed...
Name: flashrom.txt
URL: <http://www.flashrom.org/pipermail/flashrom/attachments/20090728/17f7d350/attachment-0001.txt>