[coreboot] [AMD family16h] What need to be done in coreboot to support the Virtual Wire mode

[Zheng Bao]

Solved. Not know why.

set IoapicSbFeatureEn=1.

Zheng
________________________________
From: Rudolf Marek <r.marek at assembler.cz>
Sent: Friday, October 26, 2018 8:06 PM
To: Zheng Bao; coreboot at coreboot.org
Subject: Re: [coreboot] [AMD family16h] What need to be done in coreboot to support the Virtual Wire mode

Hi,

Dne 25. 10. 18 v 9:17 Zheng Bao napsal(a):
> Any more ideas? Thanks.

Maybe the bus topology is different in coreboot. It would explain why SATA works, because it is on bus 0.

Thanks,
Rudolf

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mail.coreboot.org/pipermail/coreboot/attachments/20181027/cb8c7eb3/attachment.html>