[coreboot] Status Update of F2A85M
Mike Banon
mikebdp2 at gmail.com
Fri Nov 2 17:01:24 CET 2018
Nice report. Do you think A10-6800K CPU would have worked at this
motherboard? Or only A8-6600K is supported? Also, what hardware
revision of this motherboard do you have? (there were F2A85M / --//--
PRO and some other revisions, so I'm a bit confused) . I am seriously
considering doing a similar build, but would like to get the fastest
available CPU you could install there
On Fri, Nov 2, 2018 at 4:29 AM kinky_nekoboi
<kinky_nekoboi at bluetardis.de> wrote:
>
> something like that happens if u connect anything to a USB2 Port
>
> [ 2600.001601] usb 7-1: new full-speed USB device number 3 using ohci-pci
> [ 2600.001612] ohci-pci 0000:00:12.0: dma_direct_map_page: overflow 0x00000001c52c2ea8+8 of device mask ffffffff
> [ 2600.001619] ohci-pci 0000:00:12.0: dma_direct_map_page: overflow 0x00000001c52c2ea8+8 of device mask ffffffff
> [ 2600.001624] ohci-pci 0000:00:12.0: dma_direct_map_page: overflow 0x00000001c52c2ea8+8 of device mask ffffffff
> [ 2600.185864] usb 7-1: device descriptor read/64, error -11
> [ 2600.293659] ohci-pci 0000:00:12.0: dma_direct_map_page: overflow 0x00000001c52c2ea8+8 of device mask ffffffff
> [ 2600.293669] ohci-pci 0000:00:12.0: dma_direct_map_page: overflow 0x00000001c52c2ea8+8 of device mask ffffffff
> [ 2600.293674] ohci-pci 0000:00:12.0: dma_direct_map_page: overflow 0x00000001c52c2ea8+8 of device mask ffffffff
> [ 2600.477668] usb 7-1: device descriptor read/64, error -11
> [ 2600.585647] usb usb7-port1: attempt power cycle
> [ 2601.090486] usb 7-1: new full-speed USB device number 4 using ohci-pci
> [ 2601.090494] ohci-pci 0000:00:12.0: dma_direct_map_page: overflow 0x00000001c52c2ea8+8 of device mask ffffffff
> [ 2601.301659] ohci-pci 0000:00:12.0: dma_direct_map_page: overflow 0x00000001c52c2ea8+8 of device mask ffffffff
> [ 2601.509672] usb 7-1: device not accepting address 4, error -11
> [ 2601.693678] usb 7-1: new full-speed USB device number 5 using ohci-pci
> [ 2601.693693] ohci-pci 0000:00:12.0: dma_direct_map_page: overflow 0x00000001c52c2ea8+8 of device mask ffffffff
> [ 2601.901677] ohci-pci 0000:00:12.0: dma_direct_map_page: overflow 0x00000001c52c2ea8+8 of device mask ffffffff
> [ 2602.109672] usb 7-1: device not accepting address 5, error -11
> [ 2602.109723] usb usb7-port1: unable to enumerate USB device
>
>
> Am 02.11.2018 um 02:01 schrieb kinky_nekoboi:
>
> heeey
>
> i am very happy that i have coreboot running now on my desktop machine...
>
> ADDON-GPU card works now
>
> Nvramcui works
>
> Optionrom execution works.
>
> IOMMU does not work .. debian has to boot with iommu=off.
>
> but KVM virtualsation works somehow.
>
> Suspend does not work.
>
> USB is still extremely buggy ... only the USB3 Ports are useable.
>
>
> here some output
>
> Architektur: x86_64
> CPU Operationsmodus: 32-bit, 64-bit
> Byte-Reihenfolge: Little Endian
> CPU(s): 4
> Liste der Online-CPU(s): 0-3
> Thread(s) pro Kern: 2
> Kern(e) pro Socket: 2
> Sockel: 1
> NUMA-Knoten: 1
> Anbieterkennung: AuthenticAMD
> Prozessorfamilie: 21
> Modell: 19
> Modellname: AMD A8-6600K APU with Radeon(tm) HD Graphics
> Stepping: 1
> CPU MHz: 2068.754
> Maximale Taktfrequenz der CPU: 3900,0000
> Minimale Taktfrequenz der CPU: 1900,0000
> BogoMIPS: 7786.16
> Virtualisierung: AMD-V
> L1d Cache: 16K
> L1i Cache: 64K
> L2 Cache: 2048K
> NUMA-Knoten0 CPU(s): 0-3
> Markierungen: fpu vme de pse tsc msr pae mce cx8 apic
> sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx
> mmxext fxsr_opt pdpe1gb rdtscp lm constant_tsc rep_good nopl nonstop_tsc
> cpuid extd_apicid aperfmperf pni pclmulqdq monitor ssse3 fma cx16 sse4_1
> sse4_2 popcnt aes xsave avx f16c lahf_lm cmp_legacy svm extapic
> cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw ibs xop skinit wdt
> lwp fma4 tce nodeid_msr tbm topoext perfctr_core perfctr_nb cpb
> hw_pstate ssbd vmmcall bmi1 arat npt lbrv svm_lock nrip_save tsc_scale
> vmcb_clean flushbyasid decodeassists pausefilter pfthreshold
>
>
> 23 entries total:
>
> 0:1st timestamp 13,116
> 1:start of romstage 13,477 (361)
> 2:before ram initialization 75,515 (62,038)
> 3:after ram initialization 1,308,025 (1,232,510)
> 4:end of romstage 1,319,893 (11,867)
> 8:starting to load ramstage 1,319,966 (73)
> 15:starting LZMA decompress (ignore for x86) 1,319,984 (18)
> 16:finished LZMA decompress (ignore for x86) 1,370,088 (50,103)
> 9:finished loading ramstage 1,370,357 (269)
> 10:start of ramstage 1,371,078 (720)
> 30:device enumeration 1,461,571 (90,493)
> 40:device configuration 1,470,758 (9,186)
> 50:device enable 1,501,692 (30,933)
> 60:device initialization 1,569,453 (67,761)
> 65:Option ROM initialization 1,769,162 (199,708)
> 65:Option ROM initialization 1,936,860 (167,697)
> 70:device setup done 2,011,094 (74,234)
> 75:cbmem post 2,366,967 (355,873)
> 80:write tables 2,371,915 (4,947)
> 85:finalize chips 2,750,289 (378,374)
> 90:load payload 2,755,411 (5,122)
> 15:starting LZMA decompress (ignore for x86) 2,797,472 (42,060)
> 16:finished LZMA decompress (ignore for x86) 2,823,100 (25,628)
> 99:selfboot jump 2,838,148 (15,048)
>
> Total Time: 2,825,023
>
>
>
>
> --
> coreboot mailing list: coreboot at coreboot.org
> https://mail.coreboot.org/mailman/listinfo/coreboot
More information about the coreboot
mailing list