[coreboot] Status Update of F2A85M
kinky_nekoboi
kinky_nekoboi at bluetardis.de
Fri Nov 2 17:06:34 CET 2018
Hi Mike, i hope i can help u i am just a User of coreboot and noo skilled coreboot hacker yet lol.
The A10-6800K should work as its the same CPU core/ gen.
do not include microcode it makes the rom a brick mode.
U have to add a VGA bios if u are using the Internal GPU.
i am using a F2A85M rev 1.1 (not pro and not LE, they are quite rare)
Am 2. November 2018 17:01:24 MEZ schrieb Mike Banon <mikebdp2 at gmail.com>:
>Nice report. Do you think A10-6800K CPU would have worked at this
>motherboard? Or only A8-6600K is supported? Also, what hardware
>revision of this motherboard do you have? (there were F2A85M / --//--
>PRO and some other revisions, so I'm a bit confused) . I am seriously
>considering doing a similar build, but would like to get the fastest
>available CPU you could install there
>On Fri, Nov 2, 2018 at 4:29 AM kinky_nekoboi
><kinky_nekoboi at bluetardis.de> wrote:
>>
>> something like that happens if u connect anything to a USB2 Port
>>
>> [ 2600.001601] usb 7-1: new full-speed USB device number 3 using
>ohci-pci
>> [ 2600.001612] ohci-pci 0000:00:12.0: dma_direct_map_page: overflow
>0x00000001c52c2ea8+8 of device mask ffffffff
>> [ 2600.001619] ohci-pci 0000:00:12.0: dma_direct_map_page: overflow
>0x00000001c52c2ea8+8 of device mask ffffffff
>> [ 2600.001624] ohci-pci 0000:00:12.0: dma_direct_map_page: overflow
>0x00000001c52c2ea8+8 of device mask ffffffff
>> [ 2600.185864] usb 7-1: device descriptor read/64, error -11
>> [ 2600.293659] ohci-pci 0000:00:12.0: dma_direct_map_page: overflow
>0x00000001c52c2ea8+8 of device mask ffffffff
>> [ 2600.293669] ohci-pci 0000:00:12.0: dma_direct_map_page: overflow
>0x00000001c52c2ea8+8 of device mask ffffffff
>> [ 2600.293674] ohci-pci 0000:00:12.0: dma_direct_map_page: overflow
>0x00000001c52c2ea8+8 of device mask ffffffff
>> [ 2600.477668] usb 7-1: device descriptor read/64, error -11
>> [ 2600.585647] usb usb7-port1: attempt power cycle
>> [ 2601.090486] usb 7-1: new full-speed USB device number 4 using
>ohci-pci
>> [ 2601.090494] ohci-pci 0000:00:12.0: dma_direct_map_page: overflow
>0x00000001c52c2ea8+8 of device mask ffffffff
>> [ 2601.301659] ohci-pci 0000:00:12.0: dma_direct_map_page: overflow
>0x00000001c52c2ea8+8 of device mask ffffffff
>> [ 2601.509672] usb 7-1: device not accepting address 4, error -11
>> [ 2601.693678] usb 7-1: new full-speed USB device number 5 using
>ohci-pci
>> [ 2601.693693] ohci-pci 0000:00:12.0: dma_direct_map_page: overflow
>0x00000001c52c2ea8+8 of device mask ffffffff
>> [ 2601.901677] ohci-pci 0000:00:12.0: dma_direct_map_page: overflow
>0x00000001c52c2ea8+8 of device mask ffffffff
>> [ 2602.109672] usb 7-1: device not accepting address 5, error -11
>> [ 2602.109723] usb usb7-port1: unable to enumerate USB device
>>
>>
>> Am 02.11.2018 um 02:01 schrieb kinky_nekoboi:
>>
>> heeey
>>
>> i am very happy that i have coreboot running now on my desktop
>machine...
>>
>> ADDON-GPU card works now
>>
>> Nvramcui works
>>
>> Optionrom execution works.
>>
>> IOMMU does not work .. debian has to boot with iommu=off.
>>
>> but KVM virtualsation works somehow.
>>
>> Suspend does not work.
>>
>> USB is still extremely buggy ... only the USB3 Ports are useable.
>>
>>
>> here some output
>>
>> Architektur: x86_64
>> CPU Operationsmodus: 32-bit, 64-bit
>> Byte-Reihenfolge: Little Endian
>> CPU(s): 4
>> Liste der Online-CPU(s): 0-3
>> Thread(s) pro Kern: 2
>> Kern(e) pro Socket: 2
>> Sockel: 1
>> NUMA-Knoten: 1
>> Anbieterkennung: AuthenticAMD
>> Prozessorfamilie: 21
>> Modell: 19
>> Modellname: AMD A8-6600K APU with Radeon(tm) HD
>Graphics
>> Stepping: 1
>> CPU MHz: 2068.754
>> Maximale Taktfrequenz der CPU: 3900,0000
>> Minimale Taktfrequenz der CPU: 1900,0000
>> BogoMIPS: 7786.16
>> Virtualisierung: AMD-V
>> L1d Cache: 16K
>> L1i Cache: 64K
>> L2 Cache: 2048K
>> NUMA-Knoten0 CPU(s): 0-3
>> Markierungen: fpu vme de pse tsc msr pae mce cx8
>apic
>> sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall
>nx
>> mmxext fxsr_opt pdpe1gb rdtscp lm constant_tsc rep_good nopl
>nonstop_tsc
>> cpuid extd_apicid aperfmperf pni pclmulqdq monitor ssse3 fma cx16
>sse4_1
>> sse4_2 popcnt aes xsave avx f16c lahf_lm cmp_legacy svm extapic
>> cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw ibs xop skinit
>wdt
>> lwp fma4 tce nodeid_msr tbm topoext perfctr_core perfctr_nb cpb
>> hw_pstate ssbd vmmcall bmi1 arat npt lbrv svm_lock nrip_save
>tsc_scale
>> vmcb_clean flushbyasid decodeassists pausefilter pfthreshold
>>
>>
>> 23 entries total:
>>
>> 0:1st timestamp 13,116
>> 1:start of romstage 13,477 (361)
>> 2:before ram initialization 75,515
>(62,038)
>> 3:after ram initialization 1,308,025
>(1,232,510)
>> 4:end of romstage 1,319,893
>(11,867)
>> 8:starting to load ramstage 1,319,966 (73)
>> 15:starting LZMA decompress (ignore for x86) 1,319,984 (18)
>> 16:finished LZMA decompress (ignore for x86) 1,370,088
>(50,103)
>> 9:finished loading ramstage 1,370,357
>(269)
>> 10:start of ramstage 1,371,078
>(720)
>> 30:device enumeration 1,461,571
>(90,493)
>> 40:device configuration 1,470,758
>(9,186)
>> 50:device enable 1,501,692
>(30,933)
>> 60:device initialization 1,569,453
>(67,761)
>> 65:Option ROM initialization 1,769,162
>(199,708)
>> 65:Option ROM initialization 1,936,860
>(167,697)
>> 70:device setup done 2,011,094
>(74,234)
>> 75:cbmem post 2,366,967
>(355,873)
>> 80:write tables 2,371,915
>(4,947)
>> 85:finalize chips 2,750,289
>(378,374)
>> 90:load payload 2,755,411
>(5,122)
>> 15:starting LZMA decompress (ignore for x86) 2,797,472
>(42,060)
>> 16:finished LZMA decompress (ignore for x86) 2,823,100
>(25,628)
>> 99:selfboot jump 2,838,148
>(15,048)
>>
>> Total Time: 2,825,023
>>
>>
>>
>>
>> --
>> coreboot mailing list: coreboot at coreboot.org
>> https://mail.coreboot.org/mailman/listinfo/coreboot
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mail.coreboot.org/pipermail/coreboot/attachments/20181102/ffcdd743/attachment.html>
More information about the coreboot
mailing list