[coreboot] Status Update of F2A85M

[kinky_nekoboi]

something like that happens if u connect anything to a USB2 Port

[ 2600.001601] usb 7-1: new full-speed USB device number 3 using ohci-pci
[ 2600.001612] ohci-pci 0000:00:12.0: dma_direct_map_page: overflow
0x00000001c52c2ea8+8 of device mask ffffffff
[ 2600.001619] ohci-pci 0000:00:12.0: dma_direct_map_page: overflow
0x00000001c52c2ea8+8 of device mask ffffffff
[ 2600.001624] ohci-pci 0000:00:12.0: dma_direct_map_page: overflow
0x00000001c52c2ea8+8 of device mask ffffffff
[ 2600.185864] usb 7-1: device descriptor read/64, error -11
[ 2600.293659] ohci-pci 0000:00:12.0: dma_direct_map_page: overflow
0x00000001c52c2ea8+8 of device mask ffffffff
[ 2600.293669] ohci-pci 0000:00:12.0: dma_direct_map_page: overflow
0x00000001c52c2ea8+8 of device mask ffffffff
[ 2600.293674] ohci-pci 0000:00:12.0: dma_direct_map_page: overflow
0x00000001c52c2ea8+8 of device mask ffffffff
[ 2600.477668] usb 7-1: device descriptor read/64, error -11
[ 2600.585647] usb usb7-port1: attempt power cycle
[ 2601.090486] usb 7-1: new full-speed USB device number 4 using ohci-pci
[ 2601.090494] ohci-pci 0000:00:12.0: dma_direct_map_page: overflow
0x00000001c52c2ea8+8 of device mask ffffffff
[ 2601.301659] ohci-pci 0000:00:12.0: dma_direct_map_page: overflow
0x00000001c52c2ea8+8 of device mask ffffffff
[ 2601.509672] usb 7-1: device not accepting address 4, error -11
[ 2601.693678] usb 7-1: new full-speed USB device number 5 using ohci-pci
[ 2601.693693] ohci-pci 0000:00:12.0: dma_direct_map_page: overflow
0x00000001c52c2ea8+8 of device mask ffffffff
[ 2601.901677] ohci-pci 0000:00:12.0: dma_direct_map_page: overflow
0x00000001c52c2ea8+8 of device mask ffffffff
[ 2602.109672] usb 7-1: device not accepting address 5, error -11
[ 2602.109723] usb usb7-port1: unable to enumerate USB device


Am 02.11.2018 um 02:01 schrieb kinky_nekoboi:
> heeey
>
> i am very happy that i have coreboot running now on my desktop machine...
>
> ADDON-GPU card works now
>
> Nvramcui works
>
> Optionrom execution works.
>
> IOMMU does not work .. debian has to boot with iommu=off.
>
> but KVM virtualsation works somehow.
>
> Suspend does not work.
>
> USB is still extremely buggy ... only the USB3 Ports are useable.
>
>
> here some output
>
> Architektur:                   x86_64
> CPU Operationsmodus:           32-bit, 64-bit
> Byte-Reihenfolge:              Little Endian
> CPU(s):                        4
> Liste der Online-CPU(s):       0-3
> Thread(s) pro Kern:            2
> Kern(e) pro Socket:            2
> Sockel:                        1
> NUMA-Knoten:                   1
> Anbieterkennung:               AuthenticAMD
> Prozessorfamilie:              21
> Modell:                        19
> Modellname:                    AMD A8-6600K APU with Radeon(tm) HD Graphics
> Stepping:                      1
> CPU MHz:                       2068.754
> Maximale Taktfrequenz der CPU: 3900,0000
> Minimale Taktfrequenz der CPU: 1900,0000
> BogoMIPS:                      7786.16
> Virtualisierung:               AMD-V
> L1d Cache:                     16K
> L1i Cache:                     64K
> L2 Cache:                      2048K
> NUMA-Knoten0 CPU(s):           0-3
> Markierungen:                  fpu vme de pse tsc msr pae mce cx8 apic
> sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx
> mmxext fxsr_opt pdpe1gb rdtscp lm constant_tsc rep_good nopl nonstop_tsc
> cpuid extd_apicid aperfmperf pni pclmulqdq monitor ssse3 fma cx16 sse4_1
> sse4_2 popcnt aes xsave avx f16c lahf_lm cmp_legacy svm extapic
> cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw ibs xop skinit wdt
> lwp fma4 tce nodeid_msr tbm topoext perfctr_core perfctr_nb cpb
> hw_pstate ssbd vmmcall bmi1 arat npt lbrv svm_lock nrip_save tsc_scale
> vmcb_clean flushbyasid decodeassists pausefilter pfthreshold
>
>
> 23 entries total:
>
>    0:1st timestamp                                     13,116
>    1:start of romstage                                 13,477 (361)
>    2:before ram initialization                         75,515 (62,038)
>    3:after ram initialization                          1,308,025 (1,232,510)
>    4:end of romstage                                   1,319,893 (11,867)
>    8:starting to load ramstage                         1,319,966 (73)
>   15:starting LZMA decompress (ignore for x86)         1,319,984 (18)
>   16:finished LZMA decompress (ignore for x86)         1,370,088 (50,103)
>    9:finished loading ramstage                         1,370,357 (269)
>   10:start of ramstage                                 1,371,078 (720)
>   30:device enumeration                                1,461,571 (90,493)
>   40:device configuration                              1,470,758 (9,186)
>   50:device enable                                     1,501,692 (30,933)
>   60:device initialization                             1,569,453 (67,761)
>   65:Option ROM initialization                         1,769,162 (199,708)
>   65:Option ROM initialization                         1,936,860 (167,697)
>   70:device setup done                                 2,011,094 (74,234)
>   75:cbmem post                                        2,366,967 (355,873)
>   80:write tables                                      2,371,915 (4,947)
>   85:finalize chips                                    2,750,289 (378,374)
>   90:load payload                                      2,755,411 (5,122)
>   15:starting LZMA decompress (ignore for x86)         2,797,472 (42,060)
>   16:finished LZMA decompress (ignore for x86)         2,823,100 (25,628)
>   99:selfboot jump                                     2,838,148 (15,048)
>
> Total Time: 2,825,023
>
>
>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mail.coreboot.org/pipermail/coreboot/attachments/20181102/7b9eb19d/attachment.html>