[coreboot] Can coreboot for KabyLake rvp11 work on Intel Sasby Island kit?

[Naresh G. Solanki]

Hi Toan Le,

For Sasby Island, which is based on KBL U, you'll need corresponding
blobs(me descriptor & ucode).
Use kblrvp7 as starting point. And based on schematic(of Sasby Island) &
your requirement(interface/device), you may have change settings(like gpio,
devicetree.cb etc).

Make sure you are using right config & blobs. For this you can get in touch
with Intel FAE.

Regards,
Naresh G Solanki


On Jan 6, 2018 7:45 AM, "Toan Le manh" <lemanhtoantb at gmail.com> wrote:

Hi Naresh,

Thanks a lot for your reply.
Could you please advise which settings should be modified for sasby island?

Thanks.


2018-01-06 2:33 GMT+07:00 Naresh G. Solanki <naresh.solanki.2011 at gmail.com>:

> I guess you have coreboot working on rvp11.
>
> You may have to modify few settings based on sasby island.
>
>
>
> On Jan 4, 2018 7:58 AM, "Toan Le manh" <lemanhtoantb at gmail.com> wrote:
>
>> Hi,
>>
>> I had a Intel Sasby Island kit, which has CPU family: SkyLake, model
>> i7-6600U, Memory: LPDDR4.
>> Do you think coreboot for Intel rvp11 (Kabylake U, LPDDR4) can work on
>> that Sasby Island kit?
>>
>> Thanks & BRs,
>> Toan Le
>>
>> --
>> coreboot mailing list: coreboot at coreboot.org
>> https://mail.coreboot.org/mailman/listinfo/coreboot
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mail.coreboot.org/pipermail/coreboot/attachments/20180107/d318a46c/attachment.html>