[coreboot] Can coreboot for KabyLake rvp11 work on Intel Sasby Island kit?

[Toan Le manh]

Dear Naresh,

Thanks a lot for your advice. I'm finding correct blobs for KBL U. I'll
update once I get result.


2018-01-07 22:05 GMT+07:00 Naresh G. Solanki <naresh.solanki.2011 at gmail.com>
:

> Hi Toan Le,
>
> For Sasby Island, which is based on KBL U, you'll need corresponding
> blobs(me descriptor & ucode).
> Use kblrvp7 as starting point. And based on schematic(of Sasby Island) &
> your requirement(interface/device), you may have change settings(like gpio,
> devicetree.cb etc).
>
> Make sure you are using right config & blobs. For this you can get in
> touch with Intel FAE.
>
> Regards,
> Naresh G Solanki
>
>
> On Jan 6, 2018 7:45 AM, "Toan Le manh" <lemanhtoantb at gmail.com> wrote:
>
> Hi Naresh,
>
> Thanks a lot for your reply.
> Could you please advise which settings should be modified for sasby island?
>
> Thanks.
>
>
> 2018-01-06 2:33 GMT+07:00 Naresh G. Solanki <naresh.solanki.2011 at gmail.com
> >:
>
>> I guess you have coreboot working on rvp11.
>>
>> You may have to modify few settings based on sasby island.
>>
>>
>>
>> On Jan 4, 2018 7:58 AM, "Toan Le manh" <lemanhtoantb at gmail.com> wrote:
>>
>>> Hi,
>>>
>>> I had a Intel Sasby Island kit, which has CPU family: SkyLake, model
>>> i7-6600U, Memory: LPDDR4.
>>> Do you think coreboot for Intel rvp11 (Kabylake U, LPDDR4) can work on
>>> that Sasby Island kit?
>>>
>>> Thanks & BRs,
>>> Toan Le
>>>
>>> --
>>> coreboot mailing list: coreboot at coreboot.org
>>> https://mail.coreboot.org/mailman/listinfo/coreboot
>>>
>>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mail.coreboot.org/pipermail/coreboot/attachments/20180108/f2107ed1/attachment.html>