[coreboot] radare

[Riko Ho]

Hi Rafael,

For example I want to see the asm code for the whole 512Kbytes....is 
that possible ?
How ?

Thanks
On 5/11/2016 3:36 AM, Rafael Machado wrote:
> Hi
>
> You can use the pd command.
> p = Print
> d = disassemby
>
> You can also add the number of instruction you whant to see. For example:
>
> pd 10
>
> Thanks
> Rafael Machado
>
> Em qua, 2 de nov de 2016 às 04:01, Riko Ho <antonius.riko at gmail.com 
> <mailto:antonius.riko at gmail.com>> escreveu:
>
>     Everyone, Idwer,
>
>     I have radare question :
>
>     I played until this point :
>     c:>radare2 -e asm.bits=16 -e io.va <http://io.va>=true i946gz.bin
>       -- radare2 is WYSIWYF - what you see is what you fix
>     [f000:fff0]> S $s-0x10000 0xF000:0x0000 0x10000 0x10000 bootblk rwx
>     [f000:fff0]> e asm.segoff=true
>     [f000:fff0]> s 0xf000:0xffff0
>     [f000:ffff]>
>
>     How can I see the assembler code from there ? It's started from
>     FFFF0....I'm sure the last byte instruction is jump to 0x00000
>
>     Cheers
>
>     --
>     coreboot mailing list: coreboot at coreboot.org
>     <mailto:coreboot at coreboot.org>
>     https://www.coreboot.org/mailman/listinfo/coreboot
>


-- 
*/*===*/
Kind regards,
Riko Ho
/*===*/ *
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.coreboot.org/pipermail/coreboot/attachments/20161105/f4b452f5/attachment.html>