[coreboot] radare

[Rafael Machado]

Hi

You can use the pd command.
p = Print
d = disassemby

You can also add the number of instruction you whant to see. For example:

pd 10

Thanks
Rafael Machado

Em qua, 2 de nov de 2016 às 04:01, Riko Ho <antonius.riko at gmail.com>
escreveu:

> Everyone, Idwer,
>
> I have radare question :
>
> I played until this point :
> c:>radare2 -e asm.bits=16 -e io.va=true i946gz.bin
>   -- radare2 is WYSIWYF - what you see is what you fix
> [f000:fff0]> S $s-0x10000 0xF000:0x0000 0x10000 0x10000 bootblk rwx
> [f000:fff0]> e asm.segoff=true
> [f000:fff0]> s 0xf000:0xffff0
> [f000:ffff]>
>
> How can I see the assembler code from there ? It's started from
> FFFF0....I'm sure the last byte instruction is jump to 0x00000
>
> Cheers
>
> --
> coreboot mailing list: coreboot at coreboot.org
> https://www.coreboot.org/mailman/listinfo/coreboot
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.coreboot.org/pipermail/coreboot/attachments/20161104/1f1d88fb/attachment.html>