[coreboot] problem about ioapic
aaron lwe
aaron.lwe at gmail.com
Mon Apr 21 06:29:10 CEST 2008
On Mon, Apr 21, 2008 at 11:49 AM, aaron lwe <aaron.lwe at gmail.com> wrote:
> Hi,
>
> I've programmed CN700 D0F7 Rx70-7F with the factory BIOS value, but
> the problem remained.
> And I've tried both to use acpi madt table(when acpi enabled) and
> mptable(when acpi off), so I
> guess it shouldn't be a configuration tables's problem.
>
> The CN700 D0F7 Rx7c's value is 0 and it's not mentioned on the
> datasheet, and there is no D11F7
> on VT8237R, I wonder if I misunderstood your meaning?
>
> Thanks
>
My fault, I messed up D0F3 Rx86 / D0F7 RxE6, it should be 0x2d.
now kernel boots ok, only the ethernet card has problem with getting an irq.
I'll see if it's a table configuration problem.
Thanks.
More information about the coreboot
mailing list