[SeaBIOS] K-TEK-M275TP-FN-BL-ML USB keyboard support

[Аладышев Константин]

Ok, finally - boot log with the most modern SeaBIOS (https://pastebin.com/ZvPHXN61 ).

And please look at my post https://mail.coreboot.org/pipermail/seabios/2017-October/011897.html

Best regards,
Aladyshev Konstantin

________________________________________

Jumping to boot code at 000ffa38
CPU0: stack: 7f7cb000 - 7f7cc000, lowest used address 7f7cbaa4, stack used: 1372 bytes
SeaBIOS (version rel-1.11.0-4-g844b864)
BUILD: gcc: (Ubuntu 4.8.4-2ubuntu1~14.04.3) 4.8.4 binutils: (GNU Binutils for Ubuntu) 2.24
Attempting to find coreboot table
Found coreboot table forwarder.
Now attempting to find coreboot memory map
Add to e820 map: 00000000 00001000 2
Add to e820 map: 00001000 0009f000 1
Add to e820 map: 000a0000 00060000 2
Add to e820 map: 00100000 7f60b000 1
Add to e820 map: 7f70b000 000f5000 2
Add to e820 map: 7f800000 02a00000 2
Add to e820 map: f0000000 04000000 2
Add to e820 map: fed10000 0000a000 2
Add to e820 map: fed84000 00001000 2
Add to e820 map: 100000000 17de00000 1
Add to e820 map: 00000000 00004000 1
SeaBIOS (version rel-1.11.0-4-g844b864)
BUILD: gcc: (Ubuntu 4.8.4-2ubuntu1~14.04.3) 4.8.4 binutils: (GNU Binutils for Ubuntu) 2.24
Found coreboot cbmem console @ 7f7dd000
Found mainboard JSC Google Panther
malloc preinit
Add to e820 map: 000a0000 00050000 -1
Add to e820 map: 000f0000 00010000 2
Add to e820 map: 7f6cb000 00040000 2
phys_alloc zone=0x000eb77c size=56320 align=10 ret=7f6bd370 (detail=0x7f6bd340)
Relocating init from 0x000ddc00 to 0x7f6bd370 (size 56320)
malloc init
Found CBFS header at 0xfffff3c8
phys_alloc zone=0x7f6caeec size=156 align=10 ret=7f6bd240 (detail=0x7f6bd210)
Add romfile: bootsplash.jpg (size=100229)
phys_alloc zone=0x7f6caeec size=156 align=10 ret=7f6bd170 (detail=0x7f6bd140)
Add romfile: bootorder (size=891)
phys_alloc zone=0x7f6caeec size=156 align=10 ret=7f6bd0a0 (detail=0x7f6bd070)
Add romfile: cmos_layout.bin (size=1164)
phys_alloc zone=0x7f6caeec size=156 align=10 ret=7f6bcfd0 (detail=0x7f6bcfa0)
Add romfile: pci8086,0a26.rom (size=65536)
phys_alloc zone=0x7f6caeec size=156 align=10 ret=7f6bcf00 (detail=0x7f6bced0)
Add romfile: cmos.default (size=256)
phys_alloc zone=0x7f6caeec size=156 align=10 ret=7f6bce30 (detail=0x7f6bce00)
Add romfile: cpu_microcode_blob.bin (size=20480)
phys_alloc zone=0x7f6caeec size=156 align=10 ret=7f6bcd60 (detail=0x7f6bcd30)
Add romfile: etc/usb-time-sigatt (size=8)
phys_alloc zone=0x7f6caeec size=156 align=10 ret=7f6bcc90 (detail=0x7f6bcc60)
Add romfile: config (size=6431)
phys_alloc zone=0x7f6caeec size=156 align=10 ret=7f6bcbc0 (detail=0x7f6bcb90)
Add romfile: revision (size=576)
phys_alloc zone=0x7f6caeec size=156 align=10 ret=7f6bcaf0 (detail=0x7f6bcac0)
Add romfile:  (size=216)
phys_alloc zone=0x7f6caeec size=156 align=10 ret=7f6bca20 (detail=0x7f6bc9f0)
Add romfile: fallback/romstage (size=37740)
phys_alloc zone=0x7f6caeec size=156 align=10 ret=7f6bc950 (detail=0x7f6bc920)
Add romfile: fallback/ramstage (size=85917)
phys_alloc zone=0x7f6caeec size=156 align=10 ret=7f6bc880 (detail=0x7f6bc850)
Add romfile: fallback/payload (size=73135)
phys_alloc zone=0x7f6caeec size=156 align=10 ret=7f6bc7b0 (detail=0x7f6bc780)
Add romfile: img/memtest (size=46157)
phys_alloc zone=0x7f6caeec size=156 align=10 ret=7f6bc6e0 (detail=0x7f6bc6b0)
Add romfile: pci8086,1521.rom (size=65536)
phys_alloc zone=0x7f6caeec size=156 align=10 ret=7f6bc610 (detail=0x7f6bc5e0)
Add romfile:  (size=149848)
phys_alloc zone=0x7f6caeec size=156 align=10 ret=7f6bc540 (detail=0x7f6bc510)
Add romfile: mrc.bin (size=190180)
phys_alloc zone=0x7f6caeec size=156 align=10 ret=7f6bc470 (detail=0x7f6bc440)
Add romfile:  (size=71832)
phys_alloc zone=0x7f6caeec size=156 align=10 ret=7f6bc3a0 (detail=0x7f6bc370)
Add romfile: mrc.cache (size=65536)
phys_alloc zone=0x7f6caeec size=156 align=10 ret=7f6bc2d0 (detail=0x7f6bc2a0)
Add romfile:  (size=62360)
multiboot: eax=ffa38, ebx=7f7c33d8
init ivt
init bda
Add to e820 map: 0009fc00 00000400 2
phys_alloc zone=0x7f6caeec size=892 align=10 ret=7f6bbf20 (detail=0x7f6bbef0)
Copying romfile 'bootorder' (len 891)
Copying data 891 at 0xfff187e8 to 891 at 0x7f6bbf20
phys_alloc zone=0x7f6caeec size=108 align=10 ret=7f6bbe80 (detail=0x7f6bbe50)
boot order:
1: /pci at i0cf8/*@1f,2/drive at 1/disk at 0
2: /pci at i0cf8/usb at 1d/hub at 1/usb-*@1
3: /pci at i0cf8/usb at 1d/hub at 1/usb-*@2
4: /pci at i0cf8/usb at 1d/hub at 1/usb-*@3
5: /pci at i0cf8/usb at 1d/hub at 1/usb-*@4
6: /pci at i0cf8/usb at 1d/hub at 1/usb-*@5
7: /pci at i0cf8/usb at 1d/hub at 1/usb-*@6
8: /pci at i0cf8/usb at 1d/hub at 1/usb-*@7
9: /pci at i0cf8/pci-bridge at 1c,4/*@0
10: /pci at i0cf8/pci-bridge at 1c,4/*@0,1
11: /pci at i0cf8/pci-bridge at 1c/*@0
12: /pci at i0cf8/pci-bridge at 1c/*@0,1
13: /pci at i0cf8/pci-bridge at 1c/*@0,2
14: /pci at i0cf8/pci-bridge at 1c/*@0,3
15: /pci at i0cf8/pci-bridge at 1c,1/*@0
16: /pci at i0cf8/pci-bridge at 1c,1/*@0,1
17: /pci at i0cf8/pci-bridge at 1c,1/*@0,2
18: /pci at i0cf8/pci-bridge at 1c,1/*@0,3
19: /pci at i0cf8/pci-bridge at 1c,2/*@0
20: /pci at i0cf8/pci-bridge at 1c,2/*@0,1
21: /pci at i0cf8/pci-bridge at 1c,2/*@0,2
22: /pci at i0cf8/pci-bridge at 1c,2/*@0,3
23: /pci at i0cf8/pci-bridge at 1c,3/*@0
24: /pci at i0cf8/pci-bridge at 1c,3/*@0,1
25: /pci at i0cf8/pci-bridge at 1c,3/*@0,2
26: /pci at i0cf8/pci-bridge at 1c,3/*@0,3
27: /pci at i0cf8/*@1f,2/drive at 0/disk at 0
init bios32
init PMM
init PNPBIOS table
init keyboard
init mouse
init pic
math cp init
PCI probe
phys_alloc zone=0x7f6caeec size=32 align=10 ret=7f6bbe30 (detail=0x7f6bbe00)
PCI device 00:00.0 (vd=8086:0a04 c=0600)
phys_alloc zone=0x7f6caeec size=32 align=10 ret=7f6bbde0 (detail=0x7f6bbdb0)
PCI device 00:02.0 (vd=8086:0a26 c=0300)
phys_alloc zone=0x7f6caeec size=32 align=10 ret=7f6bbd90 (detail=0x7f6bbd60)
PCI device 00:03.0 (vd=8086:0a0c c=0403)
phys_alloc zone=0x7f6caeec size=32 align=10 ret=7f6bbd40 (detail=0x7f6bbd10)
PCI device 00:16.0 (vd=8086:9c3a c=0780)
phys_alloc zone=0x7f6caeec size=32 align=10 ret=7f6bbcf0 (detail=0x7f6bbcc0)
PCI device 00:1b.0 (vd=8086:9c20 c=0403)
phys_alloc zone=0x7f6caeec size=32 align=10 ret=7f6bbca0 (detail=0x7f6bbc70)
PCI device 00:1c.0 (vd=8086:9c10 c=0604)
phys_alloc zone=0x7f6caeec size=32 align=10 ret=7f6bbc50 (detail=0x7f6bbc20)
PCI device 00:1c.1 (vd=8086:9c12 c=0604)
phys_alloc zone=0x7f6caeec size=32 align=10 ret=7f6bbc00 (detail=0x7f6bbbd0)
PCI device 00:1c.2 (vd=8086:9c14 c=0604)
phys_alloc zone=0x7f6caeec size=32 align=10 ret=7f6bbbb0 (detail=0x7f6bbb80)
PCI device 00:1c.3 (vd=8086:9c16 c=0604)
phys_alloc zone=0x7f6caeec size=32 align=10 ret=7f6bbb60 (detail=0x7f6bbb30)
PCI device 00:1c.4 (vd=8086:9c18 c=0604)
phys_alloc zone=0x7f6caeec size=32 align=10 ret=7f6bbb10 (detail=0x7f6bbae0)
PCI device 00:1c.5 (vd=8086:9c1a c=0604)
phys_alloc zone=0x7f6caeec size=32 align=10 ret=7f6bbac0 (detail=0x7f6bba90)
PCI device 00:1d.0 (vd=8086:9c26 c=0c03)
phys_alloc zone=0x7f6caeec size=32 align=10 ret=7f6bba70 (detail=0x7f6bba40)
PCI device 00:1f.0 (vd=8086:9c43 c=0601)
phys_alloc zone=0x7f6caeec size=32 align=10 ret=7f6bba20 (detail=0x7f6bb9f0)
PCI device 00:1f.2 (vd=8086:9c03 c=0106)
phys_alloc zone=0x7f6caeec size=32 align=10 ret=7f6bb9d0 (detail=0x7f6bb9a0)
PCI device 00:1f.3 (vd=8086:9c22 c=0c05)
phys_alloc zone=0x7f6caeec size=32 align=10 ret=7f6bb980 (detail=0x7f6bb950)
PCI device 05:00.0 (vd=8086:1521 c=0200)
phys_alloc zone=0x7f6caeec size=32 align=10 ret=7f6bb930 (detail=0x7f6bb900)
PCI device 05:00.1 (vd=8086:1521 c=0200)
phys_alloc zone=0x7f6caeec size=32 align=10 ret=7f6bb8e0 (detail=0x7f6bb8b0)
PCI device 06:00.0 (vd=104c:8240 c=0604)
Found 18 PCI devices (max PCI bus is 07)
Relocating coreboot bios tables
phys_alloc zone=0x7f6caef4 size=31 align=10 ret=f4d90 (detail=0x7f6bb880)
Copying SMBIOS entry point from 0x7f713000 to 0x000f4d90
phys_alloc zone=0x7f6caef4 size=36 align=10 ret=f4d60 (detail=0x7f6bb850)
Copying ACPI RSDP from 0x7f715000 to 0x000f4d60
phys_alloc zone=0x7f6caef4 size=476 align=10 ret=f4b80 (detail=0x7f6bb820)
Copying MPTABLE from 0x7f739000/7f739010 to 0x000f4b80
phys_alloc zone=0x7f6caef4 size=304 align=10 ret=f4a50 (detail=0x7f6bb7f0)
Copying PIR from 0x7f73a000 to 0x000f4a50
rsdp=0x000f4d60
rsdt=0x7f715030
table(50434146)=0x7f718980
pm_tmr_blk=1008
Using pmtimer, ioport 0x1008
init timer
Scan for VGA option rom
Attempting to init PCI bdf 00:02.0 (vd 8086:0a26)
Copying data 65536 at 0xfff19078 to 65536 at 0x000c0000
Checking rom 0x000c0000 (sig aa55 size 128)
Running option rom at c000:0003
unimplemented handle_155fXX:27:
   a=04005f34  b=00000190  c=00000002  d=04000000 ds=0000 es=0000 ss=db80
  si=00042090 di=00000080 bp=00000000 sp=0000ffd6 cs=c000 ip=5bef  f=0046
unimplemented handle_155fXX:27:
   a=00005f51  b=0000c000  c=00000000  d=000003da ds=c000 es=c000 ss=db80
  si=00000c59 di=00000080 bp=00000000 sp=0000ffd6 cs=c000 ip=5bef  f=0046
Turning on vga text mode console
SeaBIOS (version rel-1.11.0-4-g844b864)
init usb
Copying data 8 at 0xfff2e278 to 8 at 0x00006e3c
phys_alloc zone=0x7f6caeec size=32 align=10 ret=7f6bb7d0 (detail=0x7f6bb7a0)
EHCI init on dev 00:1d.0 (regs=0xe0508820)
phys_alloc zone=0x7f6caef8 size=4096 align=1000 ret=7f70a000 (detail=0x7f6bb770)
phys_alloc zone=0x7f6caef8 size=68 align=80 ret=7f709f80 (detail=0x7f6bb740)
phys_alloc zone=0x7f6caef8 size=68 align=80 ret=7f709f00 (detail=0x7f6bb710)
phys_alloc zone=0x7f6caeec size=28 align=10 ret=7f6bb6f0 (detail=0x7f6bb6c0)
set_address 0x7f6bb7d0
ehci_alloc_async_pipe 0x7f6bb7d0 0
phys_alloc zone=0x7f6caeec size=92 align=80 ret=7f6bb600 (detail=0x7f6bb690)
ehci_send_pipe qh=0x7f6bb600 dir=0 data=0x00000000 size=0
ehci_alloc_async_pipe 0x7f6bb7d0 0
config_usb: 0x7f6bb650
ehci_send_pipe qh=0x7f6bb600 dir=128 data=0x00006d86 size=8
device rev=0200 cls=09 sub=00 proto=01 size=64
ehci_alloc_async_pipe 0x7f6bb7d0 0
ehci_send_pipe qh=0x7f6bb600 dir=128 data=0x00006dac size=9
phys_alloc zone=0x7f6caeec size=25 align=10 ret=7f6bb670 (detail=0x7f6bb5d0)
ehci_send_pipe qh=0x7f6bb600 dir=128 data=0x7f6bb670 size=25
ehci_send_pipe qh=0x7f6bb600 dir=0 data=0x00000000 size=0
ehci_send_pipe qh=0x7f6bb600 dir=128 data=0x00006d76 size=7
ehci_send_pipe qh=0x7f6bb600 dir=0 data=0x00000000 size=0
ehci_send_pipe qh=0x7f6bb600 dir=0 data=0x00000000 size=0
ehci_send_pipe qh=0x7f6bb600 dir=0 data=0x00000000 size=0
ehci_send_pipe qh=0x7f6bb600 dir=0 data=0x00000000 size=0
ehci_send_pipe qh=0x7f6bb600 dir=0 data=0x00000000 size=0
ehci_send_pipe qh=0x7f6bb600 dir=0 data=0x00000000 size=0
ehci_send_pipe qh=0x7f6bb600 dir=0 data=0x00000000 size=0
ehci_send_pipe qh=0x7f6bb600 dir=0 data=0x00000000 size=0
phys_alloc zone=0x7f6caeec size=28 align=10 ret=7f6bb5b0 (detail=0x7f6bb580)
ehci_send_pipe qh=0x7f6bb600 dir=128 data=0x00006c24 size=4
ehci_send_pipe qh=0x7f6bb600 dir=128 data=0x00006c24 size=4
ehci_send_pipe qh=0x7f6bb600 dir=128 data=0x00006c24 size=4
ehci_send_pipe qh=0x7f6bb600 dir=128 data=0x00006c24 size=4
ehci_send_pipe qh=0x7f6bb600 dir=128 data=0x00006c24 size=4
ehci_send_pipe qh=0x7f6bb600 dir=128 data=0x00006c24 size=4
ehci_send_pipe qh=0x7f6bb600 dir=128 data=0x00006c24 size=4
ehci_send_pipe qh=0x7f6bb600 dir=128 data=0x00006c24 size=4
ehci_send_pipe qh=0x7f6bb600 dir=128 data=0x00006c24 size=4
ehci_send_pipe qh=0x7f6bb600 dir=128 data=0x00006c24 size=4
phys_free 7f6bb5b0 (detail=0x7f6bb580)
phys_alloc zone=0x7f6caeec size=28 align=10 ret=7f6bb5b0 (detail=0x7f6bb580)
ehci_send_pipe qh=0x7f6bb600 dir=128 data=0x00006c24 size=4
phys_free 7f6bb5b0 (detail=0x7f6bb580)
phys_alloc zone=0x7f6caeec size=28 align=10 ret=7f6bb5b0 (detail=0x7f6bb580)
ehci_send_pipe qh=0x7f6bb600 dir=128 data=0x00006c24 size=4
phys_free 7f6bb5b0 (detail=0x7f6bb580)
phys_alloc zone=0x7f6caeec size=28 align=10 ret=7f6bb5b0 (detail=0x7f6bb580)
ehci_send_pipe qh=0x7f6bb600 dir=128 data=0x00006c24 size=4
phys_free 7f6bb5b0 (detail=0x7f6bb580)
phys_alloc zone=0x7f6caeec size=28 align=10 ret=7f6bb5b0 (detail=0x7f6bb580)
ehci_send_pipe qh=0x7f6bb600 dir=128 data=0x00006c24 size=4
ehci_send_pipe qh=0x7f6bb600 dir=0 data=0x00000000 size=0
ehci_send_pipe qh=0x7f6bb600 dir=128 data=0x00006c18 size=4
ehci_send_pipe qh=0x7f6bb600 dir=128 data=0x00006c18 size=4
set_address 0x7f6bb7d0
ehci_alloc_async_pipe 0x7f6bb7d0 0
phys_alloc zone=0x7f6caeec size=92 align=80 ret=7f6bb500 (detail=0x7f6bb4d0)
ehci_send_pipe qh=0x7f6bb500 dir=0 data=0x00000000 size=0
ehci_alloc_async_pipe 0x7f6bb7d0 0
config_usb: 0x7f6bb550
ehci_send_pipe qh=0x7f6bb500 dir=128 data=0x00006c9a size=8
device rev=0110 cls=00 sub=00 proto=00 size=64
ehci_alloc_async_pipe 0x7f6bb7d0 0
ehci_send_pipe qh=0x7f6bb500 dir=128 data=0x00006cc0 size=9
phys_alloc zone=0x7f6caeec size=59 align=10 ret=7f6bb490 (detail=0x7f6bb460)
ehci_send_pipe qh=0x7f6bb500 dir=128 data=0x7f6bb490 size=59
ehci_send_pipe qh=0x7f6bb500 dir=0 data=0x00000000 size=0
usb_hid_setup 0x7f6bb550
phys_free 7f6bb490 (detail=0x7f6bb460)
ehci_send_pipe qh=0x7f6bb600 dir=0 data=0x00000000 size=0
phys_free 7f6bb5b0 (detail=0x7f6bb580)
phys_alloc zone=0x7f6caeec size=28 align=10 ret=7f6bb5b0 (detail=0x7f6bb580)
ehci_send_pipe qh=0x7f6bb600 dir=128 data=0x00006c24 size=4
phys_free 7f6bb5b0 (detail=0x7f6bb580)
phys_alloc zone=0x7f6caeec size=28 align=10 ret=7f6bb5b0 (detail=0x7f6bb580)
ehci_send_pipe qh=0x7f6bb600 dir=128 data=0x00006c24 size=4
phys_free 7f6bb5b0 (detail=0x7f6bb580)
phys_alloc zone=0x7f6caeec size=28 align=10 ret=7f6bb5b0 (detail=0x7f6bb580)
ehci_send_pipe qh=0x7f6bb600 dir=128 data=0x00006c24 size=4
phys_free 7f6bb5b0 (detail=0x7f6bb580)
Initialized USB HUB (0 ports used)
phys_free 7f6bb670 (detail=0x7f6bb5d0)
phys_free 7f6bb6f0 (detail=0x7f6bb6c0)
phys_alloc zone=0x7f6caeec size=28 align=10 ret=7f6bb6f0 (detail=0x7f6bb6c0)
phys_free 7f6bb6f0 (detail=0x7f6bb6c0)
ehci_free_pipes 0x7f6bb7d0
phys_free 7f6bb600 (detail=0x7f6bb690)
phys_free 7f6bb500 (detail=0x7f6bb4d0)
phys_free 7f70a000 (detail=0x7f6bb770)
phys_free 7f709f80 (detail=0x7f6bb740)
phys_free 7f709f00 (detail=0x7f6bb710)
phys_free 7f6bb7d0 (detail=0x7f6bb7a0)
init ps2port
i8042_flush
i8042 flushed 55 (status=19)
i8042_command cmd=ad
i8042_wait_write
i8042_command cmd=a7
i8042_wait_write
i8042_flush
i8042_command cmd=1aa
i8042_wait_write
i8042_wait_read
i8042 param=55
i8042_command cmd=1ab
i8042_wait_write
i8042_wait_read
i8042 param=1
i8042 keyboard test failed (got 1 not 0x00)
init floppy drives
init hard drives
init ahci
phys_alloc zone=0x7f6caefc size=2048 align=10 ret=ea750 (detail=0x7f6bb7c0)
phys_alloc zone=0x7f6caef4 size=20 align=10 ret=f4a30 (detail=0x7f6bb790)
AHCI controller at 00:1f.2, iobase 0xe0508000, irq 10
AHCI: cap 0xdf34ff02, ports_impl 0x3
phys_alloc zone=0x7f6caeec size=68 align=10 ret=7f6bb740 (detail=0x7f6bb710)
phys_alloc zone=0x7f6caeec size=1024 align=400 ret=7f6bb000 (detail=0x7f6bb6e0)
phys_alloc zone=0x7f6caeec size=256 align=100 ret=7f6bb500 (detail=0x7f6bb6b0)
phys_alloc zone=0x7f6caeec size=256 align=100 ret=7f6bb400 (detail=0x7f6bb680)
AHCI/0: probing
AHCI/0: link up
AHCI/0: send cmd ...
AHCI/0: ... intbits 0x40000001, status 0x51 ...
AHCI/0: ... finished, status 0x51, ERROR 0x4
AHCI/0: send cmd ...
AHCI/0: ... intbits 0x2, status 0x58 ...
AHCI/0: ... finished, status 0x58, OK
phys_alloc zone=0x7f6caeec size=80 align=10 ret=7f6bb630 (detail=0x7f6bb600)
Searching bootorder for: /pci at i0cf8/*@1f,2/drive at 0/disk at 0
AHCI/0: supported modes: udma 6, multi-dma 2, pio 4
AHCI/0: Set transfer mode to UDMA-6
AHCI/0: send cmd ...
AHCI/0: ... intbits 0x1, status 0x50 ...
AHCI/0: ... finished, status 0x50, OK
phys_alloc zone=0x7f6caef4 size=68 align=10 ret=f49e0 (detail=0x7f6bafd0)
phys_free 7f6bb740 (detail=0x7f6bb710)
phys_free 7f6bb000 (detail=0x7f6bb6e0)
phys_free 7f6bb500 (detail=0x7f6bb6b0)
phys_free 7f6bb400 (detail=0x7f6bb680)
phys_alloc zone=0x7f6caef8 size=1024 align=400 ret=7f70ac00 (detail=0x7f6bb760)
phys_alloc zone=0x7f6caef8 size=256 align=100 ret=7f70ab00 (detail=0x7f6bb730)
phys_alloc zone=0x7f6caef8 size=256 align=100 ret=7f70aa00 (detail=0x7f6bb700)
AHCI/0: registering: "AHCI/0: 64GB SATA Flash Drive ATA-10 Hard-Disk (61057 MiBytes)"
phys_alloc zone=0x7f6caeec size=24 align=10 ret=7f6bb6e0 (detail=0x7f6bb6b0)
Registering bootable: AHCI/0: 64GB SATA Flash Drive ATA-10 Hard-Disk (61057 MiBytes) (type:2 prio:27 data:f49e0)
phys_alloc zone=0x7f6caeec size=68 align=10 ret=7f6bb5b0 (detail=0x7f6bb680)
phys_alloc zone=0x7f6caeec size=1024 align=400 ret=7f6bb000 (detail=0x7f6bb580)
phys_alloc zone=0x7f6caeec size=256 align=100 ret=7f6bb400 (detail=0x7f6bb550)
phys_alloc zone=0x7f6caeec size=256 align=100 ret=7f6bae00 (detail=0x7f6bb520)
AHCI/1: probing
AHCI/1: link up
AHCI/1: send cmd ...
AHCI/1: ... intbits 0x40000001, status 0x51 ...
AHCI/1: ... finished, status 0x51, ERROR 0x4
AHCI/1: send cmd ...
AHCI/1: ... intbits 0x2, status 0x58 ...
AHCI/1: ... finished, status 0x58, OK
phys_alloc zone=0x7f6caeec size=80 align=10 ret=7f6baf80 (detail=0x7f6baf50)
Searching bootorder for: /pci at i0cf8/*@1f,2/drive at 1/disk at 0
AHCI/1: supported modes: udma 5, multi-dma 2, pio 4
AHCI/1: Set transfer mode to UDMA-5
AHCI/1: send cmd ...
AHCI/1: ... intbits 0x1, status 0x50 ...
AHCI/1: ... finished, status 0x50, OK
phys_alloc zone=0x7f6caef4 size=68 align=10 ret=f4990 (detail=0x7f6baf20)
phys_free 7f6bb5b0 (detail=0x7f6bb680)
phys_free 7f6bb000 (detail=0x7f6bb580)
phys_free 7f6bb400 (detail=0x7f6bb550)
phys_free 7f6bae00 (detail=0x7f6bb520)
phys_alloc zone=0x7f6caef8 size=1024 align=400 ret=7f70a400 (detail=0x7f6bb680)
phys_alloc zone=0x7f6caef8 size=256 align=100 ret=7f70a900 (detail=0x7f6bb5d0)
phys_alloc zone=0x7f6caef8 size=256 align=100 ret=7f70a800 (detail=0x7f6bb5a0)
AHCI/1: registering: "AHCI/1: KINGSTON SVP180S264G ATA-8 Hard-Disk (61057 MiBytes)"
phys_alloc zone=0x7f6caeec size=24 align=10 ret=7f6bb580 (detail=0x7f6bb550)
Registering bootable: AHCI/1: KINGSTON SVP180S264G ATA-8 Hard-Disk (61057 MiBytes) (type:2 prio:1 data:f4990)
init megasas
init nvme
init lpt
Found 0 lpt ports
init serial
Found 1 serial ports
phys_alloc zone=0x7f6caeec size=80 align=10 ret=7f6bb500 (detail=0x7f6bb4d0)
Searching bootorder for: /rom at img/memtest
phys_alloc zone=0x7f6caeec size=24 align=10 ret=7f6bb4b0 (detail=0x7f6bb480)
Registering bootable: Payload [memtest] (type:32 prio:9999 data:fff60180)
Scan for option roms
Attempting to init PCI bdf 00:00.0 (vd 8086:0a04)
Attempting to map option rom on dev 00:00.0
Option rom sizing returned 0 0
Attempting to init PCI bdf 00:03.0 (vd 8086:0a0c)
Attempting to map option rom on dev 00:03.0
Option rom sizing returned 0 0
Attempting to init PCI bdf 00:16.0 (vd 8086:9c3a)
Attempting to map option rom on dev 00:16.0
Option rom sizing returned 0 0
Attempting to init PCI bdf 00:1b.0 (vd 8086:9c20)
Attempting to map option rom on dev 00:1b.0
Option rom sizing returned 0 0
Attempting to init PCI bdf 00:1c.0 (vd 8086:9c10)
Attempting to map option rom on dev 00:1c.0
Skipping non-normal pci device (type=81)
Attempting to init PCI bdf 00:1c.1 (vd 8086:9c12)
Attempting to map option rom on dev 00:1c.1
Skipping non-normal pci device (type=81)
Attempting to init PCI bdf 00:1c.2 (vd 8086:9c14)
Attempting to map option rom on dev 00:1c.2
Skipping non-normal pci device (type=81)
Attempting to init PCI bdf 00:1c.3 (vd 8086:9c16)
Attempting to map option rom on dev 00:1c.3
Skipping non-normal pci device (type=81)
Attempting to init PCI bdf 00:1c.4 (vd 8086:9c18)
Attempting to map option rom on dev 00:1c.4
Skipping non-normal pci device (type=81)
Attempting to init PCI bdf 00:1c.5 (vd 8086:9c1a)
Attempting to map option rom on dev 00:1c.5
Skipping non-normal pci device (type=81)
Attempting to init PCI bdf 00:1f.0 (vd 8086:9c43)
Attempting to map option rom on dev 00:1f.0
Option rom sizing returned 0 0
Attempting to init PCI bdf 00:1f.3 (vd 8086:9c22)
Attempting to map option rom on dev 00:1f.3
Option rom sizing returned 0 0
Attempting to init PCI bdf 05:00.0 (vd 8086:1521)
Copying data 65536 at 0xfff6b638 to 65536 at 0x000cf000
Checking rom 0x000cf000 (sig aa55 size 128)
Running option rom at cf00:0003
pmm call arg1=1
pmm01: handle=18ae1000
pmm call arg1=0
pmm00: length=1000 handle=18ae1000 flags=2
phys_alloc zone=0x7f6caeec size=65536 align=10 ret=7f6aaf20 (detail=0x7f6bb450)
pmm call arg1=1
pmm01: handle=18ae200a
pmm call arg1=0
pmm00: length=a000 handle=18ae200a flags=2
phys_alloc zone=0x7f6caeec size=655360 align=10 ret=7f60af20 (detail=0x7f6bb420)
Attempting to init PCI bdf 05:00.1 (vd 8086:1521)
Copying data 65536 at 0xfff6b638 to 65536 at 0x000d0000
Checking rom 0x000d0000 (sig aa55 size 128)
Running option rom at d000:0003
pmm call arg1=1
pmm01: handle=18ae1000
pmm call arg1=1
pmm01: handle=18ae200a
Attempting to init PCI bdf 06:00.0 (vd 104c:8240)
Attempting to map option rom on dev 06:00.0
Skipping non-normal pci device (type=1)
Checking rom 0x000cf000 (sig aa55 size 7)
Searching bootorder for: /pci at i0cf8/pci-bridge at 1c,4/*@0
phys_alloc zone=0x7f6caeec size=24 align=10 ret=7f6bb400 (detail=0x7f6bb3d0)
Registering bootable: iPXE (PCI 05:00.0) (type:128 prio:9 data:cf000382)
Checking rom 0x000d0000 (sig aa55 size 7)
Searching bootorder for: /pci at i0cf8/pci-bridge at 1c,4/*@0,1
phys_alloc zone=0x7f6caeec size=24 align=10 ret=7f6bb3b0 (detail=0x7f6bb380)
Registering bootable: iPXE (PCI 05:00.1) (type:128 prio:10 data:d0000382)

Press ESC for boot menu.

Checking for bootsplash
phys_alloc zone=0x7f6caeec size=100230 align=10 ret=7f5f2790 (detail=0x7f6bb350)
Copying romfile 'bootsplash.jpg' (len 100229)
Copying data 100229 at 0xfff00028 to 100229 at 0x7f5f2790
start showing bootsplash
phys_alloc zone=0x7f6caef0 size=256 align=10 ret=8ff00 (detail=0x7f6bb320)
phys_alloc zone=0x7f6caef0 size=256 align=10 ret=8fe00 (detail=0x7f6bb2f0)
VESA 3.0
VENDOR: Sя
PRODUCT: Sя
phys_alloc zone=0x7f6caeec size=22312 align=10 ret=7f5ed060 (detail=0x7f6bb2c0)
Decoding bootsplash.jpg
Finding vesa mode with dimensions 1024/768
mode: 0117
framebuffer: 0xd0000000
bytes per scanline: 2048
bits per pixel: 16
phys_alloc zone=0x7f6caeec size=1572864 align=10 ret=7f46d060 (detail=0x7f6bb290)
Decompressing bootsplash.jpg
Switching to graphics mode
Showing bootsplash picture
Bootsplash copy complete
phys_free 7f5f2790 (detail=0x7f6bb350)
phys_free 7f46d060 (detail=0x7f6bb290)
phys_free 8ff00 (detail=0x7f6bb320)
phys_free 8fe00 (detail=0x7f6bb2f0)
phys_free 7f5ed060 (detail=0x7f6bb2c0)
Turning on vga text mode console
SeaBIOS (version rel-1.11.0-4-g844b864)
Searching bootorder for: HALT
Mapping hd drive 0x000f4990 to 0
drive 0x000f4990: PCHS=16383/16/63 translation=lba LCHS=1024/255/63 s=125045424
Mapping hd drive 0x000f49e0 to 1
drive 0x000f49e0: PCHS=16383/16/63 translation=lba LCHS=1024/255/63 s=125045424
finalize PMM
malloc finalize
Add to e820 map: 0009fc00 00000400 2
Space available for UMB: d1000-ea000, f45b0-f4990
Add to e820 map: 7f6cb000 0003f000 1
Returned 258048 bytes of ZoneHigh
e820 map has 9 items:
  0: 0000000000000000 - 000000000009fc00 = 1 RAM
  1: 000000000009fc00 - 00000000000a0000 = 2 RESERVED
  2: 00000000000f0000 - 0000000000100000 = 2 RESERVED
  3: 0000000000100000 - 000000007f70a000 = 1 RAM
  4: 000000007f70a000 - 0000000082200000 = 2 RESERVED
  5: 00000000f0000000 - 00000000f4000000 = 2 RESERVED
  6: 00000000fed10000 - 00000000fed1a000 = 2 RESERVED
  7: 00000000fed84000 - 00000000fed85000 = 2 RESERVED
  8: 0000000100000000 - 000000027de00000 = 1 RAM
Jump to int19
enter handle_19:
  NULL
Booting from Hard Disk...

_______________________________________________


-----Original Message-----
From: Kevin O'Connor [mailto:kevin at koconnor.net] 
Sent: Monday, October 30, 2017 10:42 PM
To: Аладышев Константин
Cc: seabios at seabios.org
Subject: Re: K-TEK-M275TP-FN-BL-ML USB keyboard support

On Mon, Oct 30, 2017 at 04:00:17PM +0300, Аладышев Константин wrote:
> Hello! I'm having problems with K-TEK-M275TP-FN-BL-ML keyboard 
> (http://www.key-tek.cn/Productview.asp?id=777). It is USB device with 
> keyboard and touchpad combined. It works in OS correctly, but doesn't 
> work in SeaBIOS.

If you're experiencing a problem with SeaBIOS, please send the full debug log to the mailing list as described at:
https://www.seabios.org/Debugging

> I've tried to debug this issue and found that "usb_kbd_setup" function 
> fails on "(epdesc->wMaxPacketSize != 8)" check, cause 
> "epdesc->wMaxPacketSize" is actually 32. I've modified this "if" 
> statement to pass 32 value also and now function completes 
> successfully. But it didn't help to solve my issue. There are no 
> interrupts from keyboard, "ehci_poll_intr" always returns -1 on
> check:
> 
> if (token & QTD_STS_ACTIVE) {
>         // No intrs found.
>         return -1;
> }
> 
> I don't know what to do now. What should  I check next?
> 
> Does SeaBIOS support USB keyboard+touchpad devices at all?

SeaBIOS should support any USB keyboard (or mouse) that supports the "USB HID boot protocol".

-Kevin