[SeaBIOS] Failure to detect high-capacity SD card

[Kevin O'Connor]

On Mon, Oct 23, 2017 at 10:55:57AM -0500, Matt DeVillier wrote:
> On Mon, Oct 23, 2017 at 10:50 AM, Kevin O'Connor <kevin at koconnor.net> wrote:
> 
> > On Mon, Oct 23, 2017 at 10:39:03AM -0400, Kevin O'Connor wrote:
> > > Hi Matt,
> > >
> > > Can you gzip and attach the full log?  (At a minimum, we need to see
> > > the log extracts around the failure.)
> >
> > Ah, nevermind - I see the timeout is generated in the wait for the
> > card to be in a non-busy state.
> >
> > Unfortunately, I can't see anything wrong in the log - the card isn't
> > coming out of its initialization phase.  I can't see any reason why
> > that would be.  Has the user verified the card works under Linux?
> >
> 
> card is detected/usable under Linux, no problem there

Can you grab the syslog/dmesg output from Linux as it detects and
initializes the card?

The failure is pretty early in the card detection process and the card
isn't responding with a particular failure - it's just not going into
a ready state.

-Kevin