[SeaBIOS] How to boot USB 3.0 devices with SeaBIOS
diffusae
diffusae at yahoo.se
Sun Oct 1 04:25:05 CEST 2017
Hello!
On 01.10.2017 02:07, Kevin O'Connor wrote:
> That's an unusual failure. Can you recompile seabios with the debug
> level set to 5, reproduce, and forward the log? Then also provide a
> log with a boot when the USB 3 drive is not plugged in. Finally,
> please provide the output from "lsusb -t" and "lsusb".
To reproduce I've disconnected all other USB devices.
With the drive plugged in, there is no USB 3 hub after boot.
If there is no drive plugged in, than the timeout warning goes away:
|bfeab000| WARNING - Timeout at xhci_event_wait:735!
The drive is recognized at the USB 2 port on boot.
That's a bit odd.
Thanks again
Best regards,
Reiner
--
-------------- next part --------------
A non-text attachment was scrubbed...
Name: usb3_debug.zip
Type: application/zip
Size: 37114 bytes
Desc: not available
URL: <http://mail.coreboot.org/pipermail/seabios/attachments/20171001/c6570c11/attachment-0001.zip>
More information about the SeaBIOS
mailing list