[SeaBIOS] [PATCH 0/9] add support for generic lun enumeration

Roman Kagan rkagan at virtuozzo.com
Wed Mar 1 11:45:33 CET 2017

A number of SCSI drivers currently only see luns #0 in their targets.

This may be a problem when drives have to be assigned bigger lun
numbers, e.g. because the storage controllers don't provide enough
target numbers to accomodate all drives.
(In particular, I'm about to submit a driver for Hyper-V VMBus SCSI
controller which is limited to 2 targets only).

This series adds generic SCSI lun enumeration (either via REPORT LUNS
command or sequentially trying every lun), and makes the respective
drivers use it.

Note that the series has only been minimally tested against a recent QEMU.

Roman Kagan (9):
  blockcmd: accept only disks and CD-ROMs
  blockcmd: generic SCSI luns enumeration
  virtio-scsi: enumerate luns with REPORT LUNS
  esp-scsi: enumerate luns with REPORT LUNS
  usb-uas: enumerate luns with REPORT LUNS
  pvscsi: fix the comment about lun enumeration
  mpt-scsi: try to enumerate luns with REPORT LUNS
  lsi-scsi: reset in case of a serious problem
  lsi-scsi: try to enumerate luns with REPORT LUNS

 src/hw/blockcmd.h    |  4 +++
 src/hw/blockcmd.c    | 96 ++++++++++++++++++++++++++++++++++++++++++++++++++++
 src/hw/esp-scsi.c    | 35 +++++++++++++------
 src/hw/lsi-scsi.c    | 39 +++++++++++++++------
 src/hw/mpt-scsi.c    | 40 ++++++++++++++--------
 src/hw/pvscsi.c      |  2 +-
 src/hw/usb-uas.c     | 45 +++++++++++++++---------
 src/hw/virtio-scsi.c | 38 ++++++++++++++-------
 8 files changed, 235 insertions(+), 64 deletions(-)


More information about the SeaBIOS mailing list