[SeaBIOS] SeaBIOS recognising USB 3.0 on boot works - partly
0.w3ntd at gmail.com
Fri Dec 4 18:50:29 CET 2015
Looking at the output from Googles ChromeOS shell-ball, I do:
Write the hardware ID to get future ChromeOS updates
$ ./gbb_utility --set --hwid="SAMUS XXX-YYY-ZZZ" bios.bin bios.hwid.bin
# dd out 2 megs of the ROM at 4 megs in
$ dd bs=1M skip=4 count=2 if=bios.hwid.bin of=rwlegacy.cbfs
Using the flashrom from John's site as upstream doesn't know anything about
$ wget https://johnlewis.ie/Chromebook-ROMs/utils/flashrom -O
$ sudo ./flashrom.jlewis -w -i RW_LEGACY:rwlegacy.cbfs
Looking at your script, ORIGIMAGE is my bios.hwid.bin
Do I run flashrom from the shell-ball
$ sudo flashrom -w ./newimage.rom -i RW_LEGACY
Or John Lewis flashrom
$ sudo flashrom.jlewis.version -w ./newimage.rom -i RW_LEGACY
On 1 Dec 2015 3:39 p.m., "Kevin O'Connor" <kevin at koconnor.net> wrote:
> On Mon, Nov 30, 2015 at 07:04:55PM +0000, edward wandasiewicz wrote:
> > On 30 Nov 2015 5:35 p.m., "Kevin O'Connor" <kevin at koconnor.net> wrote:
> > > Looks like two separate issues are occurring - the Philips drive is
> > > being detected as both a high speed device and as a super speed
> > > device. I need a log with CONFIG_DEBUG_LEVEL=5 to diagnose that. The
> > > second issue appears to be a USB_TRANSACTION_ERROR response from the
> > > set_address command. I think the controller may just be a bit too
> > > picky on stall responses from devices in that situation. I've put up
> > > a patch to try and work around that in the repo at:
> > >
> > > https://github.com/KevinOConnor/seabios/tree/testing
> > >
> > > Are you able to compile SeaBIOS from source and install it on your
> > > Samus?
> > Compile? I could have a go, but don't want to brick my device. Happy
> > to write a RW_LEGACY from John Lewis.
> > Or learn how to - bit risky for a newbie?
> If you've never removed the flash read/write screw (and you normally
> hit cntl-L to enter seabios) then bricking shouldn't be a problem.
> (No guarantees.) It may require a full chrome re-install to recover
> should something go wrong though. If you have removed the read/write
> screw then you should only proceed if you know what you are doing, and
> you should have the ability to restore from an external flasher.
> Roughly, the steps to build and flash a RW_LEGACY section is as
> 1 - grab the code:
> git clone https://github.com/KevinOConnor/seabios.git -b testing
> 2 - build the code:
> cd seabios
> echo "CONFIG_COREBOOT=y" > .config
> echo "CONFIG_CBFS_LOCATION=0xffe00000" >> .config
> echo "CONFIG_VGA_COREBOOT=y" >> .config
> echo "CONFIG_DEBUG_LEVEL=5" >> .config
> make olddefconfig
> 3 - build the RW_LEGACY image by copying the attached chromeimage.sh
> to the seabios directory, make it executable, and run the script:
> Be sure to follow the directions in that script for extracting the
> original image and for writing the generated image.
> Please review the script and make sure it makes sense before running
> anything. If you don't understand a step then you probably will want
> to hold off until someone can build a tested rom for you.
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the SeaBIOS