[OpenBIOS] System Health Monitoring and current build compatibility

Programmingkid programmingkidx at gmail.com
Thu Aug 10 21:59:17 CEST 2017

> On Aug 8, 2017, at 8:40 PM, Rohret, David M <David.Rohret at csra.com> wrote:
> Greetings,
> I have a project to monitor the voltage from a mainboards power conditioner and trigger a warning when it exceeds normal parameters by more than 7%. Commercial bios dev teams are reluctant to divulge any information, so I would like to install my own instance to do the job.  I have 1 quick and 1 not so quick questions:
> 	• ​​I'm not confined to a specific motherboard, so I would like to use one that is compatible with the latest build of OpenBios; suggestions?
> 	• If anyone has dealt with system health, any suggestions where to start? 
> I appreciate any help!
> Dave
> David M. Rohret, CSRA, Inc.
> Senior Principal Systems Engineer // Distinguished Engineer
> CSRA Inc. | Defense | Air force | FIERCE Labs
> david.rohret at csra.com
> Unique Mission Cell/JVAB, p: 210-218-1954
> This electronic message transmission contains information from CSRA that may be attorney-client privileged, proprietary or confidential. The information in this message is intended only for use by the individual(s) to whom it is addressed. If you believe you have received this message in error, please contact me immediately and be aware that any use, disclosure, copying or distribution of the contents of this message is strictly prohibited. NOTE: Regardless of content, this email shall not operate to bind CSRA to any order or other contract unless pursuant to explicit written agreement or government initiative expressly permitting the use of email for such purpose.
> -- 
> OpenBIOS                 http://openbios.org/
> Mailinglist:  http://lists.openbios.org/mailman/listinfo
> Free your System - May the Forth be with you

Wouldn't you be able to do this with something like a Raspberry Pi 3 board without OpenBIOS?

More information about the OpenBIOS mailing list