[OpenBIOS] System Health Monitoring and current build compatibility

Rohret, David M David.Rohret at csra.com
Wed Aug 9 02:40:31 CEST 2017


Greetings,


I have a project to monitor the voltage from a mainboards power conditioner and trigger a warning when it exceeds normal parameters by more than 7%. Commercial bios dev teams are reluctant to divulge any information, so I would like to install my own instance to do the job.  I have 1 quick and 1 not so quick questions:

  1.  ??I'm not confined to a specific motherboard, so I would like to use one that is compatible with the latest build of OpenBios; suggestions?
  2.  If anyone has dealt with system health, any suggestions where to start?

I appreciate any help!


Dave


David M. Rohret, CSRA, Inc.
Senior Principal Systems Engineer // Distinguished Engineer
CSRA Inc. | Defense | Air force | FIERCE Labs
david.rohret at csra.com<mailto:bob.donnelly at csra.com>
Unique Mission Cell/JVAB, p: 210-218-1954


This electronic message transmission contains information from CSRA that may be attorney-client privileged, proprietary or confidential. The information in this message is intended only for use by the individual(s) to whom it is addressed. If you believe you have received this message in error, please contact me immediately and be aware that any use, disclosure, copying or distribution of the contents of this message is strictly prohibited. NOTE: Regardless of content, this email shall not operate to bind CSRA to any order or other contract unless pursuant to explicit written agreement or government initiative expressly permitting the use of email for such purpose.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mail.coreboot.org/pipermail/openbios/attachments/20170809/e9ea94f5/attachment.html>


More information about the OpenBIOS mailing list