[flashrom] Failed IL9_Pro ICH7/ICH7R

Brandon Kachmar ytech1758 at gmail.com
Thu Dec 21 19:01:43 CET 2017

Here is the output file from the flash.  I didn't create a log the
first time but did it again with the  --o ~/biosoutput

On Thu, Dec 21, 2017 at 12:45 PM, Brandon Kachmar <ytech1758 at gmail.com> wrote:
>  $ sudo flashrom -p internal  -w /home/bman/Desktop/IL9Pro13.rom
> flashrom v0.9.9-rc1-r1942 on Linux 4.10.0-42-generic (x86_64)
> flashrom is free software, get the source code at https://flashrom.org
> Calibrating delay loop... OK.
> Found chipset "Intel ICH7/ICH7R".
> Enabling flash write... OK.
> Error: SCIP never cleared!
> Error: SCIP never cleared! ....
> ... ... ...
> Found Winbond flash chip "W39V040FB" (512 kB, FWH) mapped at physical
> address 0x00000000fff80000.
> ===
> This flash part has status UNTESTED for operations: ERASE WRITE
> The test status of this chip may have been updated in the latest development
> version of flashrom. If you are running the latest development version,
> please email a report to flashrom at flashrom.org if any of the above operations
> work correctly for you with this flash chip. Please include the flashrom log
> file for all operations you tested (see the man page for details), and mention
> which mainboard or programmer you tested in the subject line.
> Thanks for your help!
> Reading old flash chip contents... done.
> Erasing and writing flash chip... FAILED at 0x000171d7! Expected=0xff,
> Found=0x00, failed byte count from 0x00010000-0x0001ffff: 0x1
> Reading current flash chip contents... done. Looking for another erase function.
> FAILED at 0x0001833f! Expected=0xff, Found=0x00, failed byte count
> from 0x00000000-0x0007ffff: 0x1
> Looking for another erase function.
> No usable erase functions left.
> Uh oh. Erase/write failed. Checking if anything has changed.
> Reading current flash chip contents... done.
> Apparently at least some data has changed.
> Your flash chip is in an unknown state.
> Get help on IRC at chat.freenode.net (channel #flashrom) or
> mail flashrom at flashrom.org with the subject "FAILED: <your board name>"!
> -------------------------------------------------------------------------------
-------------- next part --------------
A non-text attachment was scrubbed...
Name: biosoutput
Type: application/octet-stream
Size: 46204 bytes
Desc: not available
URL: <http://mail.coreboot.org/pipermail/flashrom/attachments/20171221/e72c3590/attachment-0001.obj>

More information about the flashrom mailing list