[flashrom] Failed IL9_Pro ICH7/ICH7R

Brandon Kachmar ytech1758 at gmail.com
Thu Dec 21 18:45:55 CET 2017

 $ sudo flashrom -p internal  -w /home/bman/Desktop/IL9Pro13.rom
flashrom v0.9.9-rc1-r1942 on Linux 4.10.0-42-generic (x86_64)
flashrom is free software, get the source code at https://flashrom.org

Calibrating delay loop... OK.
Found chipset "Intel ICH7/ICH7R".
Enabling flash write... OK.
Error: SCIP never cleared!
Error: SCIP never cleared! ....
... ... ...
Found Winbond flash chip "W39V040FB" (512 kB, FWH) mapped at physical
address 0x00000000fff80000.
This flash part has status UNTESTED for operations: ERASE WRITE
The test status of this chip may have been updated in the latest development
version of flashrom. If you are running the latest development version,
please email a report to flashrom at flashrom.org if any of the above operations
work correctly for you with this flash chip. Please include the flashrom log
file for all operations you tested (see the man page for details), and mention
which mainboard or programmer you tested in the subject line.
Thanks for your help!
Reading old flash chip contents... done.
Erasing and writing flash chip... FAILED at 0x000171d7! Expected=0xff,
Found=0x00, failed byte count from 0x00010000-0x0001ffff: 0x1
Reading current flash chip contents... done. Looking for another erase function.
FAILED at 0x0001833f! Expected=0xff, Found=0x00, failed byte count
from 0x00000000-0x0007ffff: 0x1
Looking for another erase function.
No usable erase functions left.
Uh oh. Erase/write failed. Checking if anything has changed.
Reading current flash chip contents... done.
Apparently at least some data has changed.
Your flash chip is in an unknown state.
Get help on IRC at chat.freenode.net (channel #flashrom) or
mail flashrom at flashrom.org with the subject "FAILED: <your board name>"!

More information about the flashrom mailing list