[flashrom] BX100: there is a Linux tool to flash ROM images through any SATA adapter

[Carl-Daniel Hailfinger]

Hi Elmar,

On 12.01.2016 21:48, Elmar Stellnberger wrote:
> I have just tested this utility:
>
> ./msecli -U -i ../opt/frimware/MU02 -m BX100
> ./msecli -L
>
> did work as expected (flashing the firmware and listing the firmware
> status of the device) besides the many other useful options it offers
> apart from flashing the firmware (debug-log, secure-erase, ... )
>
> ./msecli -D -n /dev/sde ... did print a success message for a clean
> new drive from factory but no more information

Do any of the commands mention the name or manufacturer of the flash
chip where the firmware is stored?

Regards,
Carl-Daniel

> Am 2016-01-12 um 18:02 schrieb Luc Verhaegen:
>>
>> /sbin/msecli is where the magic is, and strings shows that that is
>> filled with a load of atapi/smart stuff.
>>
>> Luc Verhaegen.