[flashrom] Will FlashROM support SPI programmer based on CH341A?

[Urja Rannikko]

Hi all,

On Wed, Nov 11, 2015 at 12:57 AM, Stefan Tauner
<stefan.tauner at alumni.tuwien.ac.at> wrote:
> On Tue, 10 Nov 2015 17:55:08 +0300
> Sergey SFH <arhichief at gmail.com> wrote:
>
>> Greatings. I want to buy SPI FLASH programmer based on CH341A. Will
>> FlashROM work with this type of programmers? And if it will, how I have to
>> use FlashROM with this programmer?
>
> Hi Sergey,
>
> it does not yet, but it will eventually. I have a programmer with that
> chip and some code but it is not completely ready. And it is in this
> state since July and I did not find time to complete it yet. So to be
> honest... it might take another few months until I finish it. There is
> another open source utility that supports the programmer but is a bit
> limited compared to flashrom. You can find the other software here:
> https://github.com/setarcos/ch341prog
> --
> Kind regards/Mit freundlichen Grüßen, Stefan Tauner
>

I have a ready-for-test (reads/writes my Eon EN25F80) flashrom ch341a branch:
https://github.com/urjaman/flashrom/tree/ch341a
or
git clone https://github.com/urjaman/flashrom.git -b ch341a

Reports (to this thread/the ML, dont address me only please) on if it
works or especially if it doesnt work are welcome.

-- 
Urja Rannikko