[flashrom] Confirming successful write for AT29C010A

Fri Jul 4 16:16:12 CEST 2014

This is the second mainboard that I try showing a message about
finishing support for the W836xx Super I/O, the first was
http://www.flashrom.org/pipermail/flashrom/2014-June/012651.html
let me know if I can do more to help.

Here is the output of flashrom -Vw for a successful write:

flashrom v0.9.7-r1822 on Linux 3.2.0-4-486 (i586)
flashrom is free software, get the source code at http://www.flashrom.org

flashrom was built with libpci 3.1.9, GCC 4.7.2, little endian
Command line (4 args): flashrom -p
internal:laptop=this_is_not_a_laptop -Vw coreboot.rom
Calibrating delay loop... OS timer resolution is 16 usecs, 23M loops
per second, delay more than 10% too short (got 73% of expected delay),
recalculating... 23M loops per second, delay more than 10% too short
(got 80% of expected delay), recalculating... 23M loops per second,
delay more than 10% too short (got 80% of expected delay),
recalculating... 23M loops per second, delay more than 10% too short
(got 80% of expected delay), recalculating... 23M loops per second,
delay loop is unreliable, trying to continue 10 myus = 23 us, 100 myus
= 82 us, 1000 myus = 746 us, 10000 myus = 16299 us, 64 myus = 59 us,
OK.
Initializing internal programmer
No coreboot table found.
Using Internal DMI decoder.
DMI chassis-type is not specific enough.
DMI string system-manufacturer: "PRAIM"
DMI string system-product-name: "Primo"
DMI string system-version: "04"
DMI string baseboard-manufacturer: "PRAIM"
DMI string baseboard-product-name: "PrimoHw01"
DMI string baseboard-version: "04"
W836xx enter config mode worked or we were already in config mode.
W836xx leave config mode had no effect.
Active config mode, unknown reg 0x20 ID: e2.
Please send the output of "flashrom -V -p internal" to
flashrom at flashrom.org with W836xx: your board name: flashrom -V
as the subject to help us finish support for your Super I/O. Thanks.
========================================================================
WARNING! You may be running flashrom on an unsupported laptop. We could
not detect this for sure because your vendor has not setup the SMBIOS
tables correctly. You can enforce execution by adding
'-p internal:laptop=this_is_not_a_laptop' to the command line, but
please read the following warning if you are not sure.

Laptops, notebooks and netbooks are difficult to support and we
recommend to use the vendor flashing utility. The embedded controller
(EC) in these machines often interacts badly with flashing.
See the manpage and http://www.flashrom.org/Laptops for details.

If flash is shared with the EC, erase is guaranteed to brick your laptop
and write may brick your laptop.
Read and probe may irritate your EC and cause fan failure, backlight
failure and sudden poweroff.
You have been warned.
========================================================================
Proceeding anyway because user forced us to.
Found chipset "AMD CS5530(A)" with PCI ID 1078:0100. Enabling flash write... OK.
The following protocols are supported: Parallel.
Probing for AMD Am29F010A/B, 128 kB: probe_jedec_common: id1 0x1f, id2
0x5f, id1 is normal flash content, id2 is normal flash content
Probing for AMD Am29F002(N)BB, 256 kB: probe_jedec_common: id1 0x1f,
id2 0x5f, id1 is normal flash content, id2 is normal flash content
Probing for AMD Am29F002(N)BT, 256 kB: probe_jedec_common: id1 0x1f,
id2 0x5f, id1 is normal flash content, id2 is normal flash content
Probing for AMD Am29F016D, 2048 kB: probe_jedec_common: id1 0x1f, id2
0x5f, id1 is normal flash content, id2 is normal flash content
Probing for AMD Am29F040B, 512 kB: probe_jedec_common: id1 0x1f, id2
0x5f, id1 is normal flash content, id2 is normal flash content
Probing for AMD Am29F080B, 1024 kB: probe_jedec_common: id1 0x1f, id2
0x5f, id1 is normal flash content, id2 is normal flash content
Probing for AMD Am29LV001BB, 128 kB: probe_jedec_common: id1 0x1f, id2
0x5f, id1 is normal flash content, id2 is normal flash content
Probing for AMD Am29LV001BT, 128 kB: probe_jedec_common: id1 0x1f, id2
0x5f, id1 is normal flash content, id2 is normal flash content
Probing for AMD Am29LV002BB, 256 kB: probe_jedec_common: id1 0x1f, id2
0x5f, id1 is normal flash content, id2 is normal flash content
Probing for AMD Am29LV002BT, 256 kB: probe_jedec_common: id1 0x1f, id2
0x5f, id1 is normal flash content, id2 is normal flash content
Probing for AMD Am29LV004BB, 512 kB: probe_jedec_common: id1 0x1f, id2
0x5f, id1 is normal flash content, id2 is normal flash content
Probing for AMD Am29LV004BT, 512 kB: probe_jedec_common: id1 0x1f, id2
0x5f, id1 is normal flash content, id2 is normal flash content
Probing for AMD Am29LV008BB, 1024 kB: probe_jedec_common: id1 0x1f,
id2 0x5f, id1 is normal flash content, id2 is normal flash content
Probing for AMD Am29LV008BT, 1024 kB: probe_jedec_common: id1 0x1f,
id2 0x5f, id1 is normal flash content, id2 is normal flash content
Probing for AMD Am29LV040B, 512 kB: probe_jedec_common: id1 0x1f, id2
0x5f, id1 is normal flash content, id2 is normal flash content
Probing for AMD Am29LV081B, 1024 kB: probe_jedec_common: id1 0x1f, id2
0x5f, id1 is normal flash content, id2 is normal flash content
Probing for AMIC A29002B, 256 kB: probe_jedec_common: id1 0x1f, id2
0x5f, id1 is normal flash content, id2 is normal flash content
Probing for AMIC A29002T, 256 kB: probe_jedec_common: id1 0x1f, id2 0x5f
Probing for AMIC A29040B, 512 kB: probe_jedec_common: id1 0x1f, id2
0x5f, id1 is normal flash content, id2 is normal flash content
Probing for Atmel AT29C512, 64 kB: probe_jedec_common: id1 0x1f, id2 0xd5
Probing for Atmel AT29C010A, 128 kB: probe_jedec_common: id1 0x1f, id2 0xd5
Found Atmel flash chip "AT29C010A" (128 kB, Parallel) at physical
address 0xfffe0000.
Probing for Atmel AT29C020, 256 kB: probe_jedec_common: id1 0x1f, id2 0xd5
Probing for Atmel AT29C040A, 512 kB: probe_jedec_common: id1 0x1f, id2 0xd5
Probing for Atmel AT49BV512, 64 kB: probe_jedec_common: id1 0x1f, id2 0xd5
Probing for Atmel AT49F002(N), 256 kB: probe_jedec_common: id1 0x1f, id2 0xd5
Probing for Atmel AT49F002(N)T, 256 kB: probe_jedec_common: id1 0x1f, id2 0xd5
Probing for Atmel AT49(H)F010, 128 kB: probe_jedec_common: id1 0x1f, id2 0xd5
Probing for Atmel AT49F020, 256 kB: probe_jedec_common: id1 0x1f, id2 0xd5
Probing for Atmel AT49F040, 512 kB: probe_jedec_common: id1 0x1f, id2 0xd5
Probing for Atmel AT49F080, 1024 kB: probe_jedec_common: id1 0x1f, id2 0xd5
Probing for Atmel AT49F080T, 1024 kB: probe_jedec_common: id1 0x1f, id2 0xd5
Probing for Catalyst CAT28F512, 64 kB: probe_jedec_common: id1 0x1f, id2 0xd5
Probing for Bright BM29F040, 512 kB: probe_jedec_common: id1 0x1f, id2 0xd5
Probing for ESMT F49B002UA, 256 kB: probe_jedec_common: id1 0x1f, id2 0xd5
Probing for Eon EN29F010, 128 kB: probe_jedec_common: id1 0x1f, id2
0x5f, id1 is normal flash content, id2 is normal flash content
Probing for Eon EN29F002(A)(N)B, 256 kB: probe_jedec_common: id1 0x1f,
id2 0x5f, id1 is normal flash content, id2 is normal flash content
Probing for Eon EN29F002(A)(N)T, 256 kB: probe_jedec_common: id1 0x1f,
id2 0x5f, id1 is normal flash content, id2 is normal flash content
Probing for Eon EN29LV640B, 8192 kB: probe_en29lv640b: id1 0x5f1f, id2 0x001f
Probing for Fujitsu MBM29F004BC, 512 kB: probe_jedec_common: id1 0x5f,
id2 0x1f, id1 parity violation, id1 is normal flash content, id2 is
normal flash content
Probing for Fujitsu MBM29F004TC, 512 kB: probe_jedec_common: id1 0x5f,
id2 0x1f, id1 parity violation, id1 is normal flash content, id2 is
normal flash content
Probing for Fujitsu MBM29F400BC, 512 kB: probe_m29f400bt: id1 0x5f, id2 0x1f
Probing for Fujitsu MBM29F400TC, 512 kB: probe_m29f400bt: id1 0x5f, id2 0x1f
Probing for Fujitsu MBM29LV160BE, 2048 kB: probe_m29f400bt: id1 0x5f, id2 0x1f
Probing for Fujitsu MBM29LV160TE, 2048 kB: probe_m29f400bt: id1 0x5f, id2 0x1f
Probing for Hyundai HY29F002T, 256 kB: probe_jedec_common: id1 0x1f, id2 0xd5
Probing for Hyundai HY29F002B, 256 kB: probe_jedec_common: id1 0x1f, id2 0xd5
Probing for Hyundai HY29F040A, 512 kB: probe_jedec_common: id1 0x5f,
id2 0x1f, id1 parity violation, id1 is normal flash content, id2 is
normal flash content
Probing for Intel 28F001BN/BX-B, 128 kB: probe_jedec_common: id1 0x1f, id2 0xd5
Probing for Intel 28F001BN/BX-T, 128 kB: probe_jedec_common: id1 0x1f, id2 0xd5
Probing for Intel 28F002BC/BL/BV/BX-T, 256 kB: probe_82802ab: id1
0x5f, id2 0x1f, id1 parity violation, id1 is normal flash content, id2
is normal flash content
Probing for Intel 28F008S3/S5/SC, 512 kB: probe_82802ab: id1 0x5f, id2
0x1f, id1 parity violation, id1 is normal flash content, id2 is normal
flash content
Probing for Intel 28F004B5/BE/BV/BX-B, 512 kB: probe_82802ab: id1
0x5f, id2 0x1f, id1 parity violation, id1 is normal flash content, id2
is normal flash content
Probing for Intel 28F004B5/BE/BV/BX-T, 512 kB: probe_82802ab: id1
0x5f, id2 0x1f, id1 parity violation, id1 is normal flash content, id2
is normal flash content
Probing for Intel 28F400BV/BX/CE/CV-B, 512 kB: probe_82802ab: id1
0x5f, id2 0x1f, id1 parity violation, id1 is normal flash content, id2
is normal flash content
Probing for Intel 28F400BV/BX/CE/CV-T, 512 kB: probe_82802ab: id1
0x5f, id2 0x1f, id1 parity violation, id1 is normal flash content, id2
is normal flash content
Probing for Macronix MX29F001B, 128 kB: probe_jedec_common: id1 0x5f,
id2 0x1f, id1 parity violation, id1 is normal flash content, id2 is
normal flash content
Probing for Macronix MX29F001T, 128 kB: probe_jedec_common: id1 0x5f,
id2 0x1f, id1 parity violation
Probing for Macronix MX29F002(N)B, 256 kB: probe_jedec_common: id1
0x5f, id2 0x1f, id1 parity violation, id1 is normal flash content, id2
is normal flash content
Probing for Macronix MX29F002(N)T, 256 kB: probe_jedec_common: id1
0x5f, id2 0x1f, id1 parity violation, id1 is normal flash content, id2
is normal flash content
Probing for Macronix MX29F040, 512 kB: probe_jedec_common: id1 0x5f,
id2 0x1f, id1 parity violation, id1 is normal flash content, id2 is
normal flash content
Probing for Macronix MX29LV040, 512 kB: probe_jedec_common: id1 0x5f,
id2 0x1f, id1 parity violation, id1 is normal flash content, id2 is
normal flash content
Probing for MoselVitelic V29C51000B, 64 kB: probe_jedec_common: id1
0x5f, id2 0x1f, id1 parity violation
Probing for MoselVitelic V29C51000T, 64 kB: probe_jedec_common: id1
0x1f, id2 0xd5
Probing for MoselVitelic V29C51400B, 512 kB: probe_jedec_common: id1
0x1f, id2 0xd5
Probing for MoselVitelic V29C51400T, 512 kB: probe_jedec_common: id1
0x1f, id2 0xd5
Probing for MoselVitelic V29LC51000, 64 kB: probe_jedec_common: id1
0x1f, id2 0xd5
Probing for MoselVitelic V29LC51001, 128 kB: probe_jedec_common: id1
0x1f, id2 0xd5
Probing for MoselVitelic V29LC51002, 256 kB: probe_jedec_common: id1
0x1f, id2 0xd5
Probing for PMC Pm29F002T, 256 kB: Chip lacks correct probe timing
information, using default 10mS/40uS. probe_jedec_common: id1 0x25,
id2 0xee
Probing for PMC Pm29F002B, 256 kB: Chip lacks correct probe timing
information, using default 10mS/40uS. probe_jedec_common: id1 0x25,
id2 0xee
Probing for PMC Pm39LV010, 128 kB: probe_jedec_common: id1 0x5f, id2
0x1f, id1 parity violation, id1 is normal flash content, id2 is normal
flash content
Probing for PMC Pm39LV020, 256 kB: probe_jedec_common: id1 0x5f, id2
0x1f, id1 parity violation, id1 is normal flash content, id2 is normal
flash content
Probing for PMC Pm39LV040, 512 kB: probe_jedec_common: id1 0x5f, id2
0x1f, id1 parity violation, id1 is normal flash content, id2 is normal
flash content
Probing for PMC Pm39LV512, 64 kB: probe_jedec_common: id1 0x5f, id2
0x1f, id1 parity violation
Probing for Sharp LH28F008BJT-BTLZ1, 1024 kB: probe_82802ab: id1 0x5f,
id2 0x1f, id1 parity violation, id1 is normal flash content, id2 is
normal flash content
Probing for SST SST28SF040A, 512 kB: probe_82802ab: id1 0x5f, id2
0x1f, id1 parity violation, id1 is normal flash content, id2 is normal
flash content
Probing for SST SST29EE010, 128 kB: probe_jedec_common: id1 0x1f, id2 0xd5
Probing for SST SST29LE010, 128 kB: probe_jedec_common: id1 0x1f, id2 0xd5
Probing for SST SST29EE020A, 256 kB: probe_jedec_common: id1 0x1f, id2 0xd5
Probing for SST SST29LE020, 256 kB: probe_jedec_common: id1 0x1f, id2 0xd5
Probing for SST SST39SF512, 64 kB: probe_jedec_common: id1 0x1f, id2 0xd5
Probing for SST SST39SF010A, 128 kB: probe_jedec_common: id1 0x1f, id2 0xd5
Probing for SST SST39SF020A, 256 kB: probe_jedec_common: id1 0x1f, id2 0xd5
Probing for SST SST39SF040, 512 kB: probe_jedec_common: id1 0x1f, id2 0xd5
Probing for SST SST39VF512, 64 kB: probe_jedec_common: id1 0x1f, id2 0xd5
Probing for SST SST39VF010, 128 kB: probe_jedec_common: id1 0x1f, id2 0xd5
Probing for SST SST39VF020, 256 kB: probe_jedec_common: id1 0x1f, id2 0xd5
Probing for SST SST39VF040, 512 kB: probe_jedec_common: id1 0x1f, id2 0xd5
Probing for SST SST39VF080, 1024 kB: probe_jedec_common: id1 0x1f, id2 0xd5
Probing for ST M29F002B, 256 kB: probe_jedec_common: id1 0x5f, id2
0x1f, id1 parity violation, id1 is normal flash content, id2 is normal
flash content
Probing for ST M29F002T/NT, 256 kB: probe_jedec_common: id1 0x5f, id2
0x1f, id1 parity violation, id1 is normal flash content, id2 is normal
flash content
Probing for ST M29F040B, 512 kB: probe_jedec_common: id1 0x5f, id2
0x1f, id1 parity violation, id1 is normal flash content, id2 is normal
flash content
Probing for ST M29F400BB, 512 kB: probe_m29f400bt: id1 0x5f, id2 0x1f
Probing for ST M29F400BT, 512 kB: probe_m29f400bt: id1 0x5f, id2 0x1f
Probing for ST M29W010B, 128 kB: probe_jedec_common: id1 0x5f, id2
0x1f, id1 parity violation
Probing for ST M29W040B, 512 kB: probe_jedec_common: id1 0x5f, id2
0x1f, id1 parity violation, id1 is normal flash content, id2 is normal
flash content
Probing for ST M29W512B, 64 kB: probe_jedec_common: id1 0x5f, id2
0x1f, id1 parity violation
Probing for SyncMOS/MoselVitelic {F,S,V}29C51001B, 128 kB:
probe_jedec_common: id1 0x1f, id2 0xd5
Probing for SyncMOS/MoselVitelic {F,S,V}29C51001T, 128 kB:
probe_jedec_common: id1 0x1f, id2 0xd5
Probing for SyncMOS/MoselVitelic {F,S,V}29C51002B, 256 kB:
probe_jedec_common: id1 0x1f, id2 0xd5
Probing for SyncMOS/MoselVitelic {F,S,V}29C51002T, 256 kB:
probe_jedec_common: id1 0x1f, id2 0xd5
Probing for SyncMOS/MoselVitelic {F,S,V}29C51004B, 512 kB:
probe_jedec_common: id1 0x1f, id2 0xd5
Probing for SyncMOS/MoselVitelic {F,S,V}29C51004T, 512 kB:
probe_jedec_common: id1 0x1f, id2 0xd5
Probing for SyncMOS/MoselVitelic {S,V}29C31004B, 512 kB:
probe_jedec_common: id1 0x1f, id2 0xd5
Probing for SyncMOS/MoselVitelic {S,V}29C31004T, 512 kB:
probe_jedec_common: id1 0x1f, id2 0xd5
Probing for TI TMS29F002RB, 256 kB: probe_jedec_common: id1 0x5f, id2
0x1f, id1 parity violation, id1 is normal flash content, id2 is normal
flash content
Probing for TI TMS29F002RT, 256 kB: probe_jedec_common: id1 0x5f, id2
0x1f, id1 parity violation, id1 is normal flash content, id2 is normal
flash content
Probing for Winbond W29C010(M)/W29C011A/W29EE011/W29EE012-old, 128 kB:
Old Winbond W29* probe method disabled because the probing sequence
puts the AMIC A49LF040A in a funky state. Use 'flashrom -c
W29C010(M)/W29C011A/W29EE011/W29EE012-old' if you have a board with
such a chip.
Probing for Winbond W29C010(M)/W29C011A/W29EE011/W29EE012, 128 kB:
probe_jedec_common: id1 0x1f, id2 0xd5
Probing for Winbond W29C020(C)/W29C022, 256 kB: probe_jedec_common:
id1 0x1f, id2 0xd5
Probing for Winbond W29C040/P, 512 kB: probe_jedec_common: id1 0x1f, id2 0xd5
Probing for Winbond W39F010, 128 kB: probe_jedec_common: id1 0x1f, id2 0xd5
Probing for Winbond W39L010, 128 kB: probe_jedec_common: id1 0x1f, id2 0xd5
Probing for Winbond W39L020, 256 kB: probe_jedec_common: id1 0x1f, id2 0xd5
Probing for Winbond W39L040, 512 kB: probe_jedec_common: id1 0x1f, id2 0xd5
Probing for Winbond W49F002U/N, 256 kB: probe_jedec_common: id1 0x1f, id2 0xd5
Probing for Winbond W49F020, 256 kB: probe_jedec_common: id1 0x1f, id2 0xd5
Found Atmel flash chip "AT29C010A" (128 kB, Parallel).
===
This flash part has status UNTESTED for operations: WRITE
The test status of this chip may have been updated in the latest development
version of flashrom. If you are running the latest development version,
please email a report to flashrom at flashrom.org if any of the above operations
work correctly for you with this flash part. Please include the flashrom
output with the additional -V option for all operations you tested (-V, -Vr,
-VE, -Vw), and mention which mainboard or programmer you tested.
Please mention your board in the subject line. Thanks for your help!
coreboot last image size (not ROM size) is 131072 bytes.
Manufacturer: ASI
Mainboard ID: MB-5BLMP
Reading old flash chip contents... done.
Erasing and writing flash chip... Trying erase function 0...
0x000000-0x01ffff:EW
Erase/write done.
Verifying flash... VERIFIED.
Restoring PCI config space for 00:12:0 reg 0x5b
Restoring PCI config space for 00:12:0 reg 0x52

-- 
Daniele Forsi