[flashrom] Winbond W25X32 Read, Erase and Write tested (with serprog Arduino-Programmer) and all works!

The Raven originalraven at hotmail.com
Sun Apr 27 10:24:19 CEST 2014


Wow, you have a good eye! ;)
I haven't seen/realize this! So tested again with full data until
"0x3ff000-0x3fffff:W".
And it works. All ok.

THX
> Hello,
>
> thanks for your report!
> I have marked the flash chip as fully tested and will commit that later
> together with other small changes. Just a small note: your write test
> does only test the first sector. While this is no problem for this
> pretty much standard chip, I would appreciate tests with random data in
> the whole image in the future if you don't mind the extra work. This
> would increase the test coverage and that's always a good thing :)
> No need to re-test this one though.





More information about the flashrom mailing list