[flashrom] Unsupported 3com device (3c905 100BaseTX [Boomerang])

san san at plusnet.pl
Thu Oct 24 21:40:33 CEST 2013


Not sure if it's FCC ID:
FAB 02-0172-004 Rev A on the back side.

On front side:
3c905B-TX
Fast Etherlink
XL PCI

03-0172-410 D

EA=0050044B4FB9
SN=6TQ24B4FB9


2013/10/23 san <san at plusnet.pl>

> W29EE011 does work with no problems.
>
>
> 2013/10/23 san <san at plusnet.pl>
>
>> I have unsupported one, so i won't use it.
>>
>> PM29F002T is too big (256kB over 128kB).
>> It does work at last for read.
>>
>> When erase it does work about 1/3 times.
>> Once i suceed to write (after erase), and whole chip was programmed well!
>>
>> There is something wrong with erase function in nic3com, as i belive...
>>
>> Later i'll try to use W29EE011 (128kB).
>>
>> Regards!
>>
>>
>> 2013/10/22 san <san at plusnet.pl>
>>
>>> Hi!
>>>
>>> I own:
>>> 02:00.0 Ethernet controller [0200]: 3Com Corporation 3c905 100BaseTX
>>> [Boomerang] [10b7:9050]
>>>
>>> It's unsupported:
>>> ---[code]---
>>> Error: No supported PCI device found.
>>> Error: Programmer initialization failed.
>>> ---[/code]---
>>>
>>> I would love to help You to get it to work with flashrom.
>>> Do You need it?
>>>
>>> Regards!
>>>
>>> --
>>> [ e-San.info | San at plusnet.pl ]
>>>
>>
>>
>>
>> --
>> [ e-San.info | San at plusnet.pl ]
>>
>
>
>
> --
> [ e-San.info | San at plusnet.pl ]
>



-- 
[ e-San.info | San at plusnet.pl ]
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.flashrom.org/pipermail/flashrom/attachments/20131024/fda0b988/attachment.html>


More information about the flashrom mailing list