[flashrom] bug

Tue Mar 6 10:41:58 CET 2012

[darkprof at SUT tusl-2c]$ sudo flashrom -w 1014tc.001 
Пароль: 
flashrom v0.9.5.1-r1509 on Linux 3.0-ARCH (i686), built with libpci 3.1.9, GCC 4.6.2 20120120 (prerelease), little endian
flashrom is free software, get the source code at http://www.flashrom.org
Calibrating delay loop... OK.
sh: dmidecode: команда не найдена
dmidecode execution unsuccessful - continuing without DMI info
Found chipset "Intel ICH2". Enabling flash write... OK.
Found Winbond flash chip "W49V002FA" (256 kB, FWH) at physical address 0xfffc0000.
===
This flash part has status UNTESTED for operations: ERASE WRITE
The test status of this chip may have been updated in the latest development
version of flashrom. If you are running the latest development version,
please email a report to flashrom at flashrom.org if any of the above operations
work correctly for you with this flash part. Please include the flashrom
output with the additional -V option for all operations you tested (-V, -Vr,
-VE, -Vw), and mention which mainboard or programmer you tested.
Please mention your board in the subject line. Thanks for your help!
Flash image seems to be a legacy BIOS. Disabling coreboot-related checks.
Reading old flash chip contents... done.
Erasing and writing flash chip... ERASE FAILED at 0x00000000! Expected=0xff, Read=0x25, failed byte count from 0x00000000-0x0000ffff: 0xfee7
ERASE FAILED!
Reading current flash chip contents... done. ERASE FAILED at 0x00000000! Expected=0xff, Read=0x25, failed byte count from 0x00000000-0x0003ffff: 0x36050
ERASE FAILED!
FAILED!
Uh oh. Erase/write failed. Checking if anything changed.
Good. It seems nothing was changed.
Writing to the flash chip apparently didn't do anything.
This means we have to add special support for your board, programmer or flash chip.
Please report this on IRC at irc.freenode.net (channel #flashrom) or
mail flashrom at flashrom.org!
-------------------------------------------------------------------------------
You may now reboot or simply leave the machine running.
[darkprof at SUT tusl-2c]$ sudo flashrom -Vw 1014tc.001 
Пароль: 
flashrom v0.9.5.1-r1509 on Linux 3.0-ARCH (i686), built with libpci 3.1.9, GCC 4.6.2 20120120 (prerelease), little endian
flashrom is free software, get the source code at http://www.flashrom.org
Calibrating delay loop... OS timer resolution is 1 usecs, 476M loops per second, delay more than 10% too short (got 84% of expected delay), recalculating... 380M loops per second, delay more than 10% too short (got 69% of expected delay), recalculating... 364M loops per second, delay more than 10% too short (got 65% of expected delay), recalculating... 525M loops per second, 10 myus = 10 us, 100 myus = 93 us, 1000 myus = 1022 us, 10000 myus = 15445 us, 4 myus = 4 us, OK.
Initializing internal programmer
No coreboot table found.
sh: dmidecode: команда не найдена
dmidecode execution unsuccessful - continuing without DMI info
Found chipset "Intel ICH2" with PCI ID 8086:2440. Enabling flash write... 
BIOS Lock Enable: disabled, BIOS Write Enable: disabled, BIOS_CNTL is 0x0
OK.
The following protocols are supported: FWH.
Probing for Atmel AT49LH002, 256 kB: probe_82802ab: id1 0x25, id2 0xdc, id1 is normal flash content, id2 is normal flash content
Probing for Intel 82802AB, 512 kB: probe_82802ab: id1 0x25, id2 0xdc, id1 is normal flash content, id2 is normal flash content
Probing for Intel 82802AC, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for PMC Pm49FL002, 256 kB: probe_jedec_common: id1 0xda, id2 0x32
Probing for PMC Pm49FL004, 512 kB: probe_jedec_common: id1 0xda, id2 0x32
Probing for Sharp LHF00L04, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF002A/B, 256 kB: probe_jedec_common: id1 0xda, id2 0x32
Probing for SST SST49LF003A/B, 384 kB: probe_jedec_common: id1 0xda, id2 0x32
Probing for SST SST49LF004A/B, 512 kB: probe_jedec_common: id1 0xda, id2 0x32
Probing for SST SST49LF004C, 512 kB: probe_82802ab: id1 0x25, id2 0xdc, id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF008A, 1024 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF008C, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF016C, 2048 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FLW040A, 512 kB: probe_82802ab: id1 0x25, id2 0xdc, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FLW040B, 512 kB: probe_82802ab: id1 0x25, id2 0xdc, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FLW080A, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FLW080B, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FW002, 256 kB: probe_82802ab: id1 0x25, id2 0xdc, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FW016, 2048 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FW040, 512 kB: probe_82802ab: id1 0x25, id2 0xdc, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FW080, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Winbond W39V040FA, 512 kB: probe_jedec_common: id1 0xda, id2 0x32
Probing for Winbond W39V040FB, 512 kB: probe_jedec_common: id1 0xda, id2 0x32
Probing for Winbond W39V040FC, 512 kB: probe_jedec_common: id1 0xda, id2 0x32
Probing for Winbond W49V002FA, 256 kB: probe_jedec_common: id1 0xda, id2 0x32
Found Winbond flash chip "W49V002FA" (256 kB, FWH) at physical address 0xfffc0000.
Probing for Winbond W39V080FA, 1024 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Winbond W39V080FA (dual mode), 512 kB: probe_jedec_common: id1 0xda, id2 0x32
Found Winbond flash chip "W49V002FA" (256 kB, FWH).
===
This flash part has status UNTESTED for operations: ERASE WRITE
The test status of this chip may have been updated in the latest development
version of flashrom. If you are running the latest development version,
please email a report to flashrom at flashrom.org if any of the above operations
work correctly for you with this flash part. Please include the flashrom
output with the additional -V option for all operations you tested (-V, -Vr,
-VE, -Vw), and mention which mainboard or programmer you tested.
Please mention your board in the subject line. Thanks for your help!
Flash image seems to be a legacy BIOS. Disabling coreboot-related checks.
Reading old flash chip contents... done.
Erasing and writing flash chip... Trying erase function 0... 0x000000-0x00ffff:EERASE FAILED at 0x00000000! Expected=0xff, Read=0x25, failed byte count from 0x00000000-0x0000ffff: 0xfee7
ERASE FAILED!
Reading current flash chip contents... done. Looking for another erase function.
Trying erase function 1... 0x000000-0x03ffff:EERASE FAILED at 0x00000000! Expected=0xff, Read=0x25, failed byte count from 0x00000000-0x0003ffff: 0x36050
ERASE FAILED!
Looking for another erase function.
No usable erase functions left.
FAILED!
Uh oh. Erase/write failed. Checking if anything changed.
Good. It seems nothing was changed.
Writing to the flash chip apparently didn't do anything.
This means we have to add special support for your board, programmer or flash chip.
Please report this on IRC at irc.freenode.net (channel #flashrom) or
mail flashrom at flashrom.org!
-------------------------------------------------------------------------------
You may now reboot or simply leave the machine running.
Restoring PCI config space for 00:1f:0 reg 0x4e
[darkprof at SUT tusl-2c]$ 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.flashrom.org/pipermail/flashrom/attachments/20120306/d9999129/attachment.html>