[flashrom] Raspberry Pi support as a programmer

[cmd_]

Just I missed some links in my mast mail with great info:

http://elinux.org/Rpi_Datasheet_751_GPIO_Registers
http://elinux.org/Rpi_Hardware
http://dmkenr5gtnd8f.cloudfront.net/wp-content/uploads/2012/02/BCM2835-ARM-Peripherals.pdf
http://elinux.org/BCM2835_datasheet_errata


2012/3/4 cmd_ <cemede at gmail.com>

> Hi guys, has past a lot of time since my last inquiry!
>
> Recently has appeared a ultra-cheap board named Raspberry Pi (perhaps you
> know http://www.raspberrypi.org/ ). This board has a powerful broadcom
> SoC that comes with USB, UART, I2C, SPI, GPIO ports... all for 25/35$,
> awsome. It could be a really versatile and powerful external/independent
> programmer for flashrom!
>
> Just take a look here: http://elinux.org/RPi_Low-level_peripherals
>
> The SPI bus could be used to program SPI flash chips (obviously) and GPIO
> for the other types.
> I propose two ideas, first one, support the board by flashrom software,
> second one, develop a daughter-board for the Raspberry-Pi to make a easy
> use of all (with sockets to program IC's or some buffers if necessary for
> other ones).
>
> That's all, greetings!
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.flashrom.org/pipermail/flashrom/attachments/20120304/7b48d7ae/attachment.html>