[flashrom] ASRock 775i65g, Flashrom r1485: log files (`flashrom -V`, …)
Paul Menzel
paulepanter at users.sourceforge.net
Wed Jan 18 17:02:42 CET 2012
Dear Flashrom folks,
this board [1] is already listed as supported [2], but having captured
the output of the successful read, erase and write operations I send it
to the list anyway.
I also sent some more log files to the coreboot list [3].
Thanks,
Paul
[1] http://www.asrock.com/MB/overview.asp?Model=775i65G
[2] http://flashrom.org/Supported_hardware#Supported_mainboards
[3] http://www.coreboot.org/pipermail/coreboot/2012-January/067990.html
-------------- next part --------------
flashrom v0.9.4-r1485 on Linux 3.1.0-3-grml-amd64 (x86_64), built with libpci 3.1.8, GCC 4.6.2, little endian
flashrom is free software, get the source code at http://www.flashrom.org
Calibrating delay loop... OS timer resolution is 1 usecs, 1808M loops per second, 10 myus = 10 us, 100 myus = 242 us, 1000 myus = 1000 us, 10000 myus = 10010 us, 4 myus = 4 us, OK.
Initializing internal programmer
No coreboot table found.
DMI string system-manufacturer: "To Be Filled By O.E.M."
DMI string system-product-name: "To Be Filled By O.E.M."
DMI string system-version: "To Be Filled By O.E.M."
DMI string baseboard-manufacturer: " "
DMI string baseboard-product-name: "775i65G."
DMI string baseboard-version: " "
DMI string chassis-type: "Desktop"
Found chipset "Intel ICH5/ICH5R" with PCI ID 8086:24d0. Enabling flash write...
BIOS Lock Enable: disabled, BIOS Write Enable: disabled, BIOS_CNTL is 0x0
OK.
Disabling flash write protection for board "ASRock 775i65G"...
Intel ICH LPC bridge: Raising GPIO23.
OK.
The following protocols are supported: FWH.
Probing for Atmel AT49LH002, 256 kB: probe_82802ab: id1 0x03, id2 0xe8, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Intel 82802AB, 512 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Intel 82802AC, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for PMC Pm49FL002, 256 kB: probe_jedec_common: id1 0xda, id2 0x54
Probing for PMC Pm49FL004, 512 kB: probe_jedec_common: id1 0xda, id2 0x54
Probing for Sharp LHF00L04, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF002A/B, 256 kB: probe_jedec_common: id1 0xda, id2 0x54
Probing for SST SST49LF003A/B, 384 kB: probe_jedec_common: id1 0xda, id2 0x54
Probing for SST SST49LF004A/B, 512 kB: probe_jedec_common: id1 0xda, id2 0x54
Probing for SST SST49LF004C, 512 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF008A, 1024 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF008C, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF016C, 2048 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FLW040A, 512 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FLW040B, 512 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FLW080A, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FLW080B, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FW002, 256 kB: probe_82802ab: id1 0x03, id2 0xe8, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FW016, 2048 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FW040, 512 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FW080, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Winbond W39V040FA, 512 kB: probe_jedec_common: id1 0xda, id2 0x54
Probing for Winbond W39V040FB, 512 kB: probe_jedec_common: id1 0xda, id2 0x54
Found Winbond flash chip "W39V040FB" (512 kB, FWH) at physical address 0xfff80000.
Lockout bits:
Hardware bootblock locking (#TBL) is not active.
Hardware remaining chip locking (#WP) is not active..
Lock status of block at 0x00000000 is Full Access.
Lock status of block at 0x00010000 is Full Access.
Lock status of block at 0x00020000 is Full Access.
Lock status of block at 0x00030000 is Full Access.
Lock status of block at 0x00040000 is Full Access.
Lock status of block at 0x00050000 is Full Access.
Lock status of block at 0x00060000 is Full Access.
Lock status of block at 0x00070000 is Full Access.
Probing for Winbond W39V040FC, 512 kB: probe_jedec_common: id1 0xda, id2 0x54
Probing for Winbond W49V002FA, 256 kB: probe_jedec_common: id1 0xda, id2 0x54
Probing for Winbond W39V080FA, 1024 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Winbond W39V080FA (dual mode), 512 kB: probe_jedec_common: id1 0xda, id2 0x54
Found Winbond flash chip "W39V040FB" (512 kB, FWH).
No operations were specified.
Restoring PCI config space for 00:1f:0 reg 0x4e
-------------- next part --------------
flashrom v0.9.4-r1485 on Linux 3.1.0-3-grml-amd64 (x86_64), built with libpci 3.1.8, GCC 4.6.2, little endian
flashrom is free software, get the source code at http://www.flashrom.org
Calibrating delay loop... OS timer resolution is 1 usecs, 1743M loops per second, 10 myus = 9 us, 100 myus = 116 us, 1000 myus = 971 us, 10000 myus = 9646 us, 4 myus = 4 us, OK.
Initializing internal programmer
No coreboot table found.
DMI string system-manufacturer: "To Be Filled By O.E.M."
DMI string system-product-name: "To Be Filled By O.E.M."
DMI string system-version: "To Be Filled By O.E.M."
DMI string baseboard-manufacturer: " "
DMI string baseboard-product-name: "775i65G."
DMI string baseboard-version: " "
DMI string chassis-type: "Desktop"
Found chipset "Intel ICH5/ICH5R" with PCI ID 8086:24d0. Enabling flash write...
BIOS Lock Enable: disabled, BIOS Write Enable: disabled, BIOS_CNTL is 0x0
OK.
Disabling flash write protection for board "ASRock 775i65G"...
Intel ICH LPC bridge: Raising GPIO23.
OK.
The following protocols are supported: FWH.
Probing for Atmel AT49LH002, 256 kB: probe_82802ab: id1 0x03, id2 0xe8, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Intel 82802AB, 512 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Intel 82802AC, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for PMC Pm49FL002, 256 kB: probe_jedec_common: id1 0xda, id2 0x54
Probing for PMC Pm49FL004, 512 kB: probe_jedec_common: id1 0xda, id2 0x54
Probing for Sharp LHF00L04, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF002A/B, 256 kB: probe_jedec_common: id1 0xda, id2 0x54
Probing for SST SST49LF003A/B, 384 kB: probe_jedec_common: id1 0xda, id2 0x54
Probing for SST SST49LF004A/B, 512 kB: probe_jedec_common: id1 0xda, id2 0x54
Probing for SST SST49LF004C, 512 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF008A, 1024 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF008C, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF016C, 2048 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FLW040A, 512 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FLW040B, 512 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FLW080A, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FLW080B, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FW002, 256 kB: probe_82802ab: id1 0x03, id2 0xe8, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FW016, 2048 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FW040, 512 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FW080, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Winbond W39V040FA, 512 kB: probe_jedec_common: id1 0xda, id2 0x54
Probing for Winbond W39V040FB, 512 kB: probe_jedec_common: id1 0xda, id2 0x54
Found Winbond flash chip "W39V040FB" (512 kB, FWH) at physical address 0xfff80000.
Lockout bits:
Hardware bootblock locking (#TBL) is not active.
Hardware remaining chip locking (#WP) is not active..
Lock status of block at 0x00000000 is Full Access.
Lock status of block at 0x00010000 is Full Access.
Lock status of block at 0x00020000 is Full Access.
Lock status of block at 0x00030000 is Full Access.
Lock status of block at 0x00040000 is Full Access.
Lock status of block at 0x00050000 is Full Access.
Lock status of block at 0x00060000 is Full Access.
Lock status of block at 0x00070000 is Full Access.
Probing for Winbond W39V040FC, 512 kB: probe_jedec_common: id1 0xda, id2 0x54
Probing for Winbond W49V002FA, 256 kB: probe_jedec_common: id1 0xda, id2 0x54
Probing for Winbond W39V080FA, 1024 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Winbond W39V080FA (dual mode), 512 kB: probe_jedec_common: id1 0xda, id2 0x54
Found Winbond flash chip "W39V040FB" (512 kB, FWH).
Lockout bits:
Hardware bootblock locking (#TBL) is not active.
Hardware remaining chip locking (#WP) is not active..
Erasing and writing flash chip... Trying erase function 0... 0x000000-0x00ffff:E, 0x010000-0x01ffff:E, 0x020000-0x02ffff:E, 0x030000-0x03ffff:E, 0x040000-0x04ffff:E, 0x050000-0x05ffff:E, 0x060000-0x06ffff:E, 0x070000-0x07ffff:E
Erase/write done.
Restoring PCI config space for 00:1f:0 reg 0x4e
-------------- next part --------------
flashrom v0.9.4-r1485 on Linux 3.1.0-3-grml-amd64 (x86_64), built with libpci 3.1.8, GCC 4.6.2, little endian
flashrom is free software, get the source code at http://www.flashrom.org
Calibrating delay loop... OS timer resolution is 1 usecs, 1800M loops per second, 10 myus = 10 us, 100 myus = 240 us, 1000 myus = 995 us, 10000 myus = 9966 us, 4 myus = 5 us, OK.
Initializing internal programmer
No coreboot table found.
DMI string system-manufacturer: "To Be Filled By O.E.M."
DMI string system-product-name: "To Be Filled By O.E.M."
DMI string system-version: "To Be Filled By O.E.M."
DMI string baseboard-manufacturer: " "
DMI string baseboard-product-name: "775i65G."
DMI string baseboard-version: " "
DMI string chassis-type: "Desktop"
Found chipset "Intel ICH5/ICH5R" with PCI ID 8086:24d0. Enabling flash write...
BIOS Lock Enable: disabled, BIOS Write Enable: disabled, BIOS_CNTL is 0x0
OK.
Disabling flash write protection for board "ASRock 775i65G"...
Intel ICH LPC bridge: Raising GPIO23.
OK.
The following protocols are supported: FWH.
Probing for Atmel AT49LH002, 256 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Intel 82802AB, 512 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Intel 82802AC, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for PMC Pm49FL002, 256 kB: probe_jedec_common: id1 0xda, id2 0x54
Probing for PMC Pm49FL004, 512 kB: probe_jedec_common: id1 0xda, id2 0x54
Probing for Sharp LHF00L04, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF002A/B, 256 kB: probe_jedec_common: id1 0xda, id2 0x54
Probing for SST SST49LF003A/B, 384 kB: probe_jedec_common: id1 0xda, id2 0x54
Probing for SST SST49LF004A/B, 512 kB: probe_jedec_common: id1 0xda, id2 0x54
Probing for SST SST49LF004C, 512 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF008A, 1024 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF008C, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF016C, 2048 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FLW040A, 512 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FLW040B, 512 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FLW080A, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FLW080B, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FW002, 256 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FW016, 2048 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FW040, 512 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FW080, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Winbond W39V040FA, 512 kB: probe_jedec_common: id1 0xda, id2 0x54
Probing for Winbond W39V040FB, 512 kB: probe_jedec_common: id1 0xda, id2 0x54
Found Winbond flash chip "W39V040FB" (512 kB, FWH) at physical address 0xfff80000.
Lockout bits:
Hardware bootblock locking (#TBL) is not active.
Hardware remaining chip locking (#WP) is not active..
Lock status of block at 0x00000000 is Full Access.
Lock status of block at 0x00010000 is Full Access.
Lock status of block at 0x00020000 is Full Access.
Lock status of block at 0x00030000 is Full Access.
Lock status of block at 0x00040000 is Full Access.
Lock status of block at 0x00050000 is Full Access.
Lock status of block at 0x00060000 is Full Access.
Lock status of block at 0x00070000 is Full Access.
Probing for Winbond W39V040FC, 512 kB: probe_jedec_common: id1 0xda, id2 0x54
Probing for Winbond W49V002FA, 256 kB: probe_jedec_common: id1 0xda, id2 0x54
Probing for Winbond W39V080FA, 1024 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Winbond W39V080FA (dual mode), 512 kB: probe_jedec_common: id1 0xda, id2 0x54
Found Winbond flash chip "W39V040FB" (512 kB, FWH).
Lockout bits:
Hardware bootblock locking (#TBL) is not active.
Hardware remaining chip locking (#WP) is not active..
Reading flash... done.
Restoring PCI config space for 00:1f:0 reg 0x4e
-------------- next part --------------
flashrom v0.9.4-r1485 on Linux 3.1.0-3-grml-amd64 (x86_64), built with libpci 3.1.8, GCC 4.6.2, little endian
flashrom is free software, get the source code at http://www.flashrom.org
Calibrating delay loop... OS timer resolution is 1 usecs, 1614M loops per second, delay more than 10% too short (got 89% of expected delay), recalculating... 1807M loops per second, 10 myus = 10 us, 100 myus = 100 us, 1000 myus = 999 us, 10000 myus = 10000 us, 4 myus = 4 us, OK.
Initializing internal programmer
No coreboot table found.
DMI string system-manufacturer: "To Be Filled By O.E.M."
DMI string system-product-name: "To Be Filled By O.E.M."
DMI string system-version: "To Be Filled By O.E.M."
DMI string baseboard-manufacturer: " "
DMI string baseboard-product-name: "775i65G."
DMI string baseboard-version: " "
DMI string chassis-type: "Desktop"
Found chipset "Intel ICH5/ICH5R" with PCI ID 8086:24d0. Enabling flash write...
BIOS Lock Enable: disabled, BIOS Write Enable: disabled, BIOS_CNTL is 0x0
OK.
Disabling flash write protection for board "ASRock 775i65G"...
Intel ICH LPC bridge: Raising GPIO23.
OK.
The following protocols are supported: FWH.
Probing for Atmel AT49LH002, 256 kB: probe_82802ab: id1 0x03, id2 0xe8, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Intel 82802AB, 512 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Intel 82802AC, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for PMC Pm49FL002, 256 kB: probe_jedec_common: id1 0xda, id2 0x54
Probing for PMC Pm49FL004, 512 kB: probe_jedec_common: id1 0xda, id2 0x54
Probing for Sharp LHF00L04, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF002A/B, 256 kB: probe_jedec_common: id1 0xda, id2 0x54
Probing for SST SST49LF003A/B, 384 kB: probe_jedec_common: id1 0xda, id2 0x54
Probing for SST SST49LF004A/B, 512 kB: probe_jedec_common: id1 0xda, id2 0x54
Probing for SST SST49LF004C, 512 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF008A, 1024 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF008C, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF016C, 2048 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FLW040A, 512 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FLW040B, 512 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FLW080A, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FLW080B, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FW002, 256 kB: probe_82802ab: id1 0x03, id2 0xe8, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FW016, 2048 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FW040, 512 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FW080, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Winbond W39V040FA, 512 kB: probe_jedec_common: id1 0xda, id2 0x54
Probing for Winbond W39V040FB, 512 kB: probe_jedec_common: id1 0xda, id2 0x54
Found Winbond flash chip "W39V040FB" (512 kB, FWH) at physical address 0xfff80000.
Lockout bits:
Hardware bootblock locking (#TBL) is not active.
Hardware remaining chip locking (#WP) is not active..
Lock status of block at 0x00000000 is Full Access.
Lock status of block at 0x00010000 is Full Access.
Lock status of block at 0x00020000 is Full Access.
Lock status of block at 0x00030000 is Full Access.
Lock status of block at 0x00040000 is Full Access.
Lock status of block at 0x00050000 is Full Access.
Lock status of block at 0x00060000 is Full Access.
Lock status of block at 0x00070000 is Full Access.
Probing for Winbond W39V040FC, 512 kB: probe_jedec_common: id1 0xda, id2 0x54
Probing for Winbond W49V002FA, 256 kB: probe_jedec_common: id1 0xda, id2 0x54
Probing for Winbond W39V080FA, 1024 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Winbond W39V080FA (dual mode), 512 kB: probe_jedec_common: id1 0xda, id2 0x54
Found Winbond flash chip "W39V040FB" (512 kB, FWH).
Lockout bits:
Hardware bootblock locking (#TBL) is not active.
Hardware remaining chip locking (#WP) is not active..
Reading flash... done.
Restoring PCI config space for 00:1f:0 reg 0x4e
-------------- next part --------------
flashrom v0.9.4-r1485 on Linux 3.1.0-3-grml-amd64 (x86_64), built with libpci 3.1.8, GCC 4.6.2, little endian
flashrom is free software, get the source code at http://www.flashrom.org
Calibrating delay loop... OS timer resolution is 1 usecs, 1682M loops per second, 10 myus = 10 us, 100 myus = 224 us, 1000 myus = 930 us, 10000 myus = 9314 us, 4 myus = 4 us, OK.
Initializing internal programmer
No coreboot table found.
DMI string system-manufacturer: "To Be Filled By O.E.M."
DMI string system-product-name: "To Be Filled By O.E.M."
DMI string system-version: "To Be Filled By O.E.M."
DMI string baseboard-manufacturer: " "
DMI string baseboard-product-name: "775i65G."
DMI string baseboard-version: " "
DMI string chassis-type: "Desktop"
Found chipset "Intel ICH5/ICH5R" with PCI ID 8086:24d0. Enabling flash write...
BIOS Lock Enable: disabled, BIOS Write Enable: disabled, BIOS_CNTL is 0x0
OK.
Disabling flash write protection for board "ASRock 775i65G"...
Intel ICH LPC bridge: Raising GPIO23.
OK.
The following protocols are supported: FWH.
Probing for Atmel AT49LH002, 256 kB: probe_82802ab: id1 0x03, id2 0xe8, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Intel 82802AB, 512 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Intel 82802AC, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for PMC Pm49FL002, 256 kB: probe_jedec_common: id1 0xda, id2 0x54
Probing for PMC Pm49FL004, 512 kB: probe_jedec_common: id1 0xda, id2 0x54
Probing for Sharp LHF00L04, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF002A/B, 256 kB: probe_jedec_common: id1 0xda, id2 0x54
Probing for SST SST49LF003A/B, 384 kB: probe_jedec_common: id1 0xda, id2 0x54
Probing for SST SST49LF004A/B, 512 kB: probe_jedec_common: id1 0xda, id2 0x54
Probing for SST SST49LF004C, 512 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF008A, 1024 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF008C, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF016C, 2048 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FLW040A, 512 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FLW040B, 512 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FLW080A, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FLW080B, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FW002, 256 kB: probe_82802ab: id1 0x03, id2 0xe8, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FW016, 2048 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FW040, 512 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FW080, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Winbond W39V040FA, 512 kB: probe_jedec_common: id1 0xda, id2 0x54
Probing for Winbond W39V040FB, 512 kB: probe_jedec_common: id1 0xda, id2 0x54
Found Winbond flash chip "W39V040FB" (512 kB, FWH) at physical address 0xfff80000.
Lockout bits:
Hardware bootblock locking (#TBL) is not active.
Hardware remaining chip locking (#WP) is not active..
Lock status of block at 0x00000000 is Full Access.
Lock status of block at 0x00010000 is Full Access.
Lock status of block at 0x00020000 is Full Access.
Lock status of block at 0x00030000 is Full Access.
Lock status of block at 0x00040000 is Full Access.
Lock status of block at 0x00050000 is Full Access.
Lock status of block at 0x00060000 is Full Access.
Lock status of block at 0x00070000 is Full Access.
Probing for Winbond W39V040FC, 512 kB: probe_jedec_common: id1 0xda, id2 0x54
Probing for Winbond W49V002FA, 256 kB: probe_jedec_common: id1 0xda, id2 0x54
Probing for Winbond W39V080FA, 1024 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Winbond W39V080FA (dual mode), 512 kB: probe_jedec_common: id1 0xda, id2 0x54
Found Winbond flash chip "W39V040FB" (512 kB, FWH).
Lockout bits:
Hardware bootblock locking (#TBL) is not active.
Hardware remaining chip locking (#WP) is not active..
Flash image seems to be a legacy BIOS. Disabling coreboot-related checks.
Reading old flash chip contents... done.
Erasing and writing flash chip... Trying erase function 0... 0x000000-0x00ffff:W, 0x010000-0x01ffff:EW, 0x020000-0x02ffff:EW, 0x030000-0x03ffff:EW, 0x040000-0x04ffff:EW, 0x050000-0x05ffff:EW, 0x060000-0x06ffff:E, 0x070000-0x07ffff:EW
Erase/write done.
Verifying flash... VERIFIED.
Restoring PCI config space for 00:1f:0 reg 0x4e
-------------- next part --------------
flashrom v0.9.4-r1485 on Linux 3.1.0-3-grml-amd64 (x86_64), built with libpci 3.1.8, GCC 4.6.2, little endian
flashrom is free software, get the source code at http://www.flashrom.org
Calibrating delay loop... OS timer resolution is 1 usecs, 1800M loops per second, 10 myus = 10 us, 100 myus = 120 us, 1000 myus = 995 us, 10000 myus = 9969 us, 4 myus = 4 us, OK.
Initializing internal programmer
No coreboot table found.
DMI string system-manufacturer: "To Be Filled By O.E.M."
DMI string system-product-name: "To Be Filled By O.E.M."
DMI string system-version: "To Be Filled By O.E.M."
DMI string baseboard-manufacturer: " "
DMI string baseboard-product-name: "775i65G."
DMI string baseboard-version: " "
DMI string chassis-type: "Desktop"
Found chipset "Intel ICH5/ICH5R" with PCI ID 8086:24d0. Enabling flash write...
BIOS Lock Enable: disabled, BIOS Write Enable: disabled, BIOS_CNTL is 0x0
OK.
Disabling flash write protection for board "ASRock 775i65G"...
Intel ICH LPC bridge: Raising GPIO23.
OK.
The following protocols are supported: FWH.
Probing for Atmel AT49LH002, 256 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Intel 82802AB, 512 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Intel 82802AC, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for PMC Pm49FL002, 256 kB: probe_jedec_common: id1 0xda, id2 0x54
Probing for PMC Pm49FL004, 512 kB: probe_jedec_common: id1 0xda, id2 0x54
Probing for Sharp LHF00L04, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF002A/B, 256 kB: probe_jedec_common: id1 0xda, id2 0x54
Probing for SST SST49LF003A/B, 384 kB: probe_jedec_common: id1 0xda, id2 0x54
Probing for SST SST49LF004A/B, 512 kB: probe_jedec_common: id1 0xda, id2 0x54
Probing for SST SST49LF004C, 512 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF008A, 1024 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF008C, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF016C, 2048 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FLW040A, 512 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FLW040B, 512 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FLW080A, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FLW080B, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FW002, 256 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FW016, 2048 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FW040, 512 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FW080, 1024 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Winbond W39V040FA, 512 kB: probe_jedec_common: id1 0xda, id2 0x54
Probing for Winbond W39V040FB, 512 kB: probe_jedec_common: id1 0xda, id2 0x54
Found Winbond flash chip "W39V040FB" (512 kB, FWH) at physical address 0xfff80000.
Lockout bits:
Hardware bootblock locking (#TBL) is not active.
Hardware remaining chip locking (#WP) is not active..
Lock status of block at 0x00000000 is Full Access.
Lock status of block at 0x00010000 is Full Access.
Lock status of block at 0x00020000 is Full Access.
Lock status of block at 0x00030000 is Full Access.
Lock status of block at 0x00040000 is Full Access.
Lock status of block at 0x00050000 is Full Access.
Lock status of block at 0x00060000 is Full Access.
Lock status of block at 0x00070000 is Full Access.
Probing for Winbond W39V040FC, 512 kB: probe_jedec_common: id1 0xda, id2 0x54
Probing for Winbond W49V002FA, 256 kB: probe_jedec_common: id1 0xda, id2 0x54
Probing for Winbond W39V080FA, 1024 kB: probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Winbond W39V080FA (dual mode), 512 kB: probe_jedec_common: id1 0xda, id2 0x54
Found Winbond flash chip "W39V040FB" (512 kB, FWH).
Lockout bits:
Hardware bootblock locking (#TBL) is not active.
Hardware remaining chip locking (#WP) is not active..
Flash image seems to be a legacy BIOS. Disabling coreboot-related checks.
Reading old flash chip contents... done.
Erasing and writing flash chip... Trying erase function 0... 0x000000-0x00ffff:S, 0x010000-0x01ffff:W, 0x020000-0x02ffff:W, 0x030000-0x03ffff:W, 0x040000-0x04ffff:W, 0x050000-0x05ffff:W, 0x060000-0x06ffff:W, 0x070000-0x07ffff:W
Erase/write done.
Verifying flash... VERIFIED.
Restoring PCI config space for 00:1f:0 reg 0x4e
-------------- next part --------------
superiotool r (master-3ad8c54)
Probing for ALi Super I/O at 0x3f0...
Failed. Returned data: id=0xffff, rev=0xff
Probing for ALi Super I/O at 0x370...
Failed. Returned data: id=0xffff, rev=0xff
Probing for Fintek Super I/O at 0x2e...
Failed. Returned data: vid=0x4400, id=0x6388
Probing for Fintek Super I/O at 0x4e...
Failed. Returned data: vid=0xffff, id=0xffff
Probing for Fintek Super I/O at 0x2e...
Failed. Returned data: vid=0xffff, id=0xffff
Probing for Fintek Super I/O at 0x4e...
Failed. Returned data: vid=0xffff, id=0xffff
Probing for ITE Super I/O (init=standard) at 0x25e...
Failed. Returned data: id=0xffff, rev=0xf
Probing for ITE Super I/O (init=it8502e) at 0x25e...
Failed. Returned data: id=0xffff, rev=0xf
Probing for ITE Super I/O (init=it8761e) at 0x25e...
Failed. Returned data: id=0xffff, rev=0xf
Probing for ITE Super I/O (init=it8228e) at 0x25e...
Failed. Returned data: id=0xffff, rev=0xf
Probing for ITE Super I/O (init=0x87,0x87) at 0x25e...
Failed. Returned data: id=0xffff, rev=0xf
Probing for ITE Super I/O (init=standard) at 0x2e...
Failed. Returned data: id=0xffff, rev=0xf
Probing for ITE Super I/O (init=it8502e) at 0x2e...
Failed. Returned data: id=0xffff, rev=0xf
Probing for ITE Super I/O (init=it8761e) at 0x2e...
Failed. Returned data: id=0xffff, rev=0xf
Probing for ITE Super I/O (init=it8228e) at 0x2e...
Failed. Returned data: id=0xffff, rev=0xf
Probing for ITE Super I/O (init=0x87,0x87) at 0x2e...
Failed. Returned data: id=0x8863, rev=0xf
Probing for ITE Super I/O (init=standard) at 0x4e...
Failed. Returned data: id=0xffff, rev=0xf
Probing for ITE Super I/O (init=it8502e) at 0x4e...
Failed. Returned data: id=0xffff, rev=0xf
Probing for ITE Super I/O (init=it8761e) at 0x4e...
Failed. Returned data: id=0xffff, rev=0xf
Probing for ITE Super I/O (init=it8228e) at 0x4e...
Failed. Returned data: id=0xffff, rev=0xf
Probing for ITE Super I/O (init=0x87,0x87) at 0x4e...
Failed. Returned data: id=0xffff, rev=0xf
Probing for ITE Super I/O (init=legacy/it8661f) at 0x370...
Failed. Returned data: id=0xffff, rev=0xf
Probing for ITE Super I/O (init=legacy/it8671f) at 0x370...
Failed. Returned data: id=0xffff, rev=0xf
Probing for NSC Super I/O at 0x2e...
Failed. Returned data: port=0xff, port+1=0xff
Probing for NSC Super I/O at 0x4e...
Failed. Returned data: port=0xff, port+1=0xff
Probing for NSC Super I/O at 0x15c...
Failed. Returned data: port=0xff, port+1=0xff
Probing for NSC Super I/O at 0x164e...
Failed. Returned data: port=0xff, port+1=0xff
Probing for Nuvoton Super I/O at 0x164e...
Failed. Returned data: chip_id=0xffff
Probing for Nuvoton Super I/O (sid=0xfc) at 0x164e...
Failed. Returned data: sid=0xff, id=0xffff, rev=0x00
Probing for Nuvoton Super I/O at 0x2e...
Failed. Returned data: chip_id=0x8863
Probing for Nuvoton Super I/O (sid=0xfc) at 0x2e...
Failed. Returned data: sid=0xff, id=0x8863, rev=0x00
Probing for Nuvoton Super I/O at 0x4e...
Failed. Returned data: chip_id=0xffff
Probing for Nuvoton Super I/O (sid=0xfc) at 0x4e...
Failed. Returned data: sid=0xff, id=0xffff, rev=0x00
Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x2e...
Failed. Returned data: id=0xff, rev=0xff
Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x2e...
Failed. Returned data: id=0xff, rev=0xff
Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x4e...
Failed. Returned data: id=0xff, rev=0xff
Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x4e...
Failed. Returned data: id=0xff, rev=0xff
Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x162e...
Failed. Returned data: id=0xff, rev=0xff
Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x162e...
Failed. Returned data: id=0xff, rev=0xff
Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x164e...
Failed. Returned data: id=0xff, rev=0xff
Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x164e...
Failed. Returned data: id=0xff, rev=0xff
Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x3f0...
Failed. Returned data: id=0xff, rev=0xff
Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x3f0...
Failed. Returned data: id=0xff, rev=0xff
Probing for SMSC Super I/O (idregs=0x20/0x21) at 0x370...
Failed. Returned data: id=0xff, rev=0xff
Probing for SMSC Super I/O (idregs=0x0d/0x0e) at 0x370...
Failed. Returned data: id=0xff, rev=0xff
Probing for Winbond Super I/O (init=0x88) at 0x2e...
Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
Probing for Winbond Super I/O (init=0x89) at 0x2e...
Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
Probing for Winbond Super I/O (init=0x86,0x86) at 0x2e...
Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
Probing for Winbond Super I/O (init=0x87,0x87) at 0x2e...
Found Winbond W83627EHF/EF/EHG/EG (id=0x88, rev=0x63) at 0x2e
Register dump:
idx 20 21 22 23 24 25 26 27 28 29 2a 2b 2c 2d 2e 2f
val 88 63 ff 00 44 00 00 ff 50 04 00 00 09 41 00 ff
def 88 MM ff 00 MM 00 MM RR 50 04 00 RR 00 21 00 00
LDN 0x00 (Floppy)
idx 30 60 61 70 74 f0 f1 f2 f4 f5
val 01 03 f0 06 02 0e 00 ff 00 00
def 01 03 f0 06 02 8e 00 ff 00 00
LDN 0x01 (Parallel port)
idx 30 60 61 70 74 f0
val 00 03 78 07 03 3b
def 01 03 78 07 04 3f
LDN 0x02 (COM1)
idx 30 60 61 70 f0
val 01 03 f8 04 00
def 01 03 f8 04 00
LDN 0x03 (COM2)
idx 30 60 61 70 f0 f1
val 01 02 f8 03 00 5c
def 01 02 f8 03 00 00
LDN 0x05 (Keyboard)
idx 30 60 61 62 63 70 72 f0
val 01 00 60 00 64 01 0c 82
def 01 00 60 00 64 01 0c 83
LDN 0x06 (Serial flash interface)
idx 30 62 63
val 00 ff ff
def 00 00 00
LDN 0x07 (GPIO 1, GPIO 6, game port, MIDI port)
idx 30 60 61 62 63 70 f0 f1 f2 f3 f4 f5 f6 f7
val 00 02 01 03 30 00 ff ff ff ff ff ff ff 00
def 00 02 01 03 30 09 ff 00 00 00 ff 00 00 00
LDN 0x08 (WDTO#, PLED)
idx 30 f5 f6 f7
val 00 ff 00 ff
def 00 00 00 00
LDN 0x09 (GPIO 2, GPIO 3, GPIO 4, GPIO 5, SUSLED)
idx 30 e0 e1 e2 e3 e4 e5 f0 f1 f2 f3 f4 f5 f6 f7
val 0e ff 01 00 ff ff ff a0 f9 00 40 ff f3 00 00
def 00 ff 00 00 ff 00 00 ff 00 00 00 ff 00 00 00
LDN 0x0a (ACPI)
idx 30 70 e0 e1 e2 e3 e4 e5 e6 e7 e8 f2 f3 f4 f6 f7
val 00 00 01 00 ff 24 00 00 0c 00 09 7c 00 00 00 00
def 00 00 01 00 ff 08 00 RR 00 00 RR 7c 00 00 00 00
LDN 0x0b (Hardware monitor)
idx 30 60 61 70 f0 f1
val 01 02 90 00 c1 3f
def 00 00 00 00 c1 00
Hardware monitor (0x0295)
Probing for Winbond Super I/O (init=0x88) at 0x4e...
Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
Probing for Winbond Super I/O (init=0x89) at 0x4e...
Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
Probing for Winbond Super I/O (init=0x86,0x86) at 0x4e...
Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
Probing for Winbond Super I/O (init=0x87,0x87) at 0x4e...
Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
Probing for Winbond Super I/O (init=0x88) at 0x3f0...
Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
Probing for Winbond Super I/O (init=0x89) at 0x3f0...
Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
Probing for Winbond Super I/O (init=0x86,0x86) at 0x3f0...
Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
Probing for Winbond Super I/O (init=0x87,0x87) at 0x3f0...
Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
Probing for Winbond Super I/O (init=0x88) at 0x370...
Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
Probing for Winbond Super I/O (init=0x89) at 0x370...
Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
Probing for Winbond Super I/O (init=0x86,0x86) at 0x370...
Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
Probing for Winbond Super I/O (init=0x87,0x87) at 0x370...
Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
Probing for Winbond Super I/O (init=0x88) at 0x250...
Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
Probing for Winbond Super I/O (init=0x89) at 0x250...
Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
Probing for Winbond Super I/O (init=0x86,0x86) at 0x250...
Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
Probing for Winbond Super I/O (init=0x87,0x87) at 0x250...
Failed. Returned data: id/oldid=0xff/0x0f, rev=0xff
Probing for VIA Super I/O at 0x3f0...
PCI device 1106:0686 not found.
Probing for AMD EC Super I/O at 0xaa...
Probing for Server Engines Super I/O at 0x2e...
Failed. Returned data: id=0xffff, rev=0xff
Probing for Infineon Super I/O at 0x2e...
Failed. Returned data: id=0xff, rev=0xff
Probing for Infineon Super I/O at 0x4e...
Failed. Returned data: id=0xff, rev=0xff
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 198 bytes
Desc: This is a digitally signed message part
URL: <http://www.flashrom.org/pipermail/flashrom/attachments/20120118/f4a72a3a/attachment.asc>
More information about the flashrom
mailing list