[flashrom] 2theMax RAID 100 (HPT370)
Roy
roytam at gmail.com
Fri Dec 28 09:53:36 CET 2012
2012/12/28 Idwer Vollering <vidwer at gmail.com>:
> 2012/12/27 Roy <roytam at gmail.com>:
>> Hi all,
>>
>> I got a 2theMax RAID 100 card with SST MPF 39SF512 70-4C-NH 64KB ROm on
>> PCB,
>> flashrom segfaults at the end.
>
> Interesting. Can you run flashrom from GDB?
>
> 'gdb --args ./flashrom -p atahpt -V'
> (gdb) start
> (wait a little)
> (gdb) bt
>
Sure. But isn't pcilib yells the prefix path is NULL?
root at www6:~/flashrom-0.9.6.1# gdb -args ./flashrom -p atahpt
GNU gdb (GDB) 7.0.1-debian
Copyright (C) 2009 Free Software Foundation, Inc.
License GPLv3+: GNU GPL version 3 or later
<http://gnu.org/licenses/gpl.html>
This is free software: you are free to change and redistribute it.
There is NO WARRANTY, to the extent permitted by law. Type "show copying"
and "show warranty" for details.
This GDB was configured as "i486-linux-gnu".
For bug reporting instructions, please see:
<http://www.gnu.org/software/gdb/bugs/>...
Reading symbols from /root/flashrom-0.9.6.1/flashrom...done.
(gdb) r
Starting program: /root/flashrom-0.9.6.1/flashrom -p atahpt
flashrom v0.9.6.1-r1564 on Linux 2.6.32-5-686 (i686)
flashrom is free software, get the source code at http://www.flashrom.org
Calibrating delay loop... OK.
===
This PCI device is UNTESTED. Please report the 'flashrom -p xxxx' output
to flashrom at flashrom.org if it works for you. Please add the name of your
PCI device to the subject. Thank you for your help!
===
No EEPROM/flash device found.
Note: flashrom can never write if the flash chip isn't found automatically.
pcilib: Cannot open (null)/devices/0000:00:0f.0/config
Program received signal SIGSEGV, Segmentation fault.
0xb7ee52ae in ?? () from /lib/i686/cmov/libc.so.6
(gdb) bt
#0 0xb7ee52ae in ?? () from /lib/i686/cmov/libc.so.6
#1 0xb7ee6745 in ?? () from /lib/i686/cmov/libc.so.6
#2 0xb7ee98ad in free () from /lib/i686/cmov/libc.so.6
#3 0x0806dd5f in undo_pci_write (p=0x80a30e0) at pcidev.c:274
#4 0x08049ff2 in programmer_shutdown () at flashrom.c:367
#5 0x0804db16 in main (argc=3, argv=0xbffffd94) at cli_classic.c:521
(gdb)
>>
>> lspci:
>> 00:0f.0 Mass storage controller [0180]: HighPoint Technologies, Inc.
>> HPT366/368/370/370A/372/372N [1103:0004] (rev 03)
>> Subsystem: HighPoint Technologies, Inc. HPT370 UDMA100
>> [1103:0005]
>> Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
>> ParErr-
>> Stepping- SERR- FastB2B- DisINTx-
>> Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
>> <TAbort- <MAbort- >SERR- <PERR- INTx-
>> Latency: 120 (2000ns min, 2000ns max), Cache Line Size: 32 bytes
>> Interrupt: pin A routed to IRQ 18
>> Region 0: I/O ports at a800 [size=8]
>> Region 1: I/O ports at a400 [size=4]
>> Region 2: I/O ports at a000 [size=8]
>> Region 3: I/O ports at 9800 [size=4]
>> Region 4: I/O ports at 9400 [size=256]
>> [virtual] Expansion ROM at 20020000 [disabled] [size=128K]
>> Kernel driver in use: HPT366_IDE
>
> Does unloading/not loading hpt366_ide at boot time improve things?
>
>> 00: 03 11 04 00 05 00 00 02 03 00 80 01 08 78 00 00
>> 10: 01 a8 00 00 01 a4 00 00 01 a0 00 00 01 98 00 00
>> 20: 01 94 00 00 00 00 00 00 00 00 00 00 03 11 05 00
>> 30: 00 00 00 00 60 00 00 00 00 00 00 00 0a 01 08 08
>> 40: a7 4e 81 06 a7 4e 81 06 a7 4e 81 06 a7 4e 81 06
>> 50: 05 01 00 00 05 01 00 00 1b 00 00 23 24 00 26 00
>> 60: 01 00 22 00 00 00 00 00 00 00 00 00 00 00 00 00
>> 70: 00 00 00 00 00 00 00 00 94 00 00 00 00 00 00 00
>> 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>> f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>>
>> flashrom v0.9.6.1-r1564 on Linux 2.6.32-5-686 (i686)
>> flashrom is free software, get the source code at
>> http://www.flashrom.org
>>
>> flashrom was built with libpci 3.1.7, GCC 4.4.5, little endian
>
> On which operating system is it built, segfaulting?
Debian 6.0.6 i386.
>
>> Command line (3 args): ./flashrom -p atahpt -V
>> Calibrating delay loop... OS timer resolution is 1 usecs, 230M loops per
>> second, delay more than 10% too short (got 76% of expected delay),
>> recalculating... 291M loops per second, 10 myus = 10 us, 100 myus = 97
>> us,
>> 1000 myus = 962 us, 10000 myus = 9635 us, 4 myus = 5 us, OK.
>> Initializing atahpt programmer
>> Found "Highpoint HPT366/368/370/370A/372/372N" (1103:0004, BDF 00:0f.0).
>> ===
>> This PCI device is UNTESTED. Please report the 'flashrom -p xxxx' output
>> to flashrom at flashrom.org if it works for you. Please add the name of
>> your
>> PCI device to the subject. Thank you for your help!
>> ===
>> Requested BAR is I/O
>> The following protocols are supported: Parallel.
>> Probing for AMD Am29F010A/B, 128 kB: probe_jedec_common: id1 0x00, id2
>> 0x00,
>> id1 parity violation, id1 is normal flash content, id2 is normal flash
>> content
>> Probing for AMD Am29F002(N)BB, 256 kB: probe_jedec_common: id1 0x00, id2
>> 0x00, id1 parity violation, id1 is normal flash content, id2 is normal
>> flash
>> content
>> Probing for AMD Am29F002(N)BT, 256 kB: probe_jedec_common: id1 0x00, id2
>> 0x00, id1 parity violation, id1 is normal flash content, id2 is normal
>> flash
>> content
>> Probing for AMD Am29F016D, 2048 kB: probe_jedec_common: id1 0x00, id2
>> 0x00,
>> id1 parity violation, id1 is normal flash content, id2 is normal flash
>> content
>> Probing for AMD Am29F040B, 512 kB: probe_jedec_common: id1 0x00, id2
>> 0x00,
>> id1 parity violation, id1 is normal flash content, id2 is normal flash
>> content
>> Probing for AMD Am29F080B, 1024 kB: probe_jedec_common: id1 0x00, id2
>> 0x00,
>> id1 parity violation, id1 is normal flash content, id2 is normal flash
>> content
>> Probing for AMD Am29LV001BB, 128 kB: probe_jedec_common: id1 0x00, id2
>> 0x00,
>> id1 parity violation, id1 is normal flash content, id2 is normal flash
>> content
>> Probing for AMD Am29LV001BT, 128 kB: probe_jedec_common: id1 0x00, id2
>> 0x00,
>> id1 parity violation, id1 is normal flash content, id2 is normal flash
>> content
>> Probing for AMD Am29LV002BB, 256 kB: probe_jedec_common: id1 0x00, id2
>> 0x00,
>> id1 parity violation, id1 is normal flash content, id2 is normal flash
>> content
>> Probing for AMD Am29LV002BT, 256 kB: probe_jedec_common: id1 0x00, id2
>> 0x00,
>> id1 parity violation, id1 is normal flash content, id2 is normal flash
>> content
>> Probing for AMD Am29LV004BB, 512 kB: probe_jedec_common: id1 0x00, id2
>> 0x00,
>> id1 parity violation, id1 is normal flash content, id2 is normal flash
>> content
>> Probing for AMD Am29LV004BT, 512 kB: probe_jedec_common: id1 0x00, id2
>> 0x00,
>> id1 parity violation, id1 is normal flash content, id2 is normal flash
>> content
>> Probing for AMD Am29LV008BB, 1024 kB: probe_jedec_common: id1 0x00, id2
>> 0x00, id1 parity violation, id1 is normal flash content, id2 is normal
>> flash
>> content
>> Probing for AMD Am29LV008BT, 1024 kB: probe_jedec_common: id1 0x00, id2
>> 0x00, id1 parity violation, id1 is normal flash content, id2 is normal
>> flash
>> content
>> Probing for AMD Am29LV040B, 512 kB: probe_jedec_common: id1 0x00, id2
>> 0x00,
>> id1 parity violation, id1 is normal flash content, id2 is normal flash
>> content
>> Probing for AMD Am29LV081B, 1024 kB: probe_jedec_common: id1 0x00, id2
>> 0x00,
>> id1 parity violation, id1 is normal flash content, id2 is normal flash
>> content
>> Probing for AMIC A29002B, 256 kB: probe_jedec_common: id1 0x00, id2
>> 0x00,
>> id1 parity violation, id1 is normal flash content, id2 is normal flash
>> content
>> Probing for AMIC A29002T, 256 kB: probe_jedec_common: id1 0x00, id2
>> 0x00,
>> id1 parity violation, id1 is normal flash content, id2 is normal flash
>> content
>> Probing for AMIC A29040B, 512 kB: probe_jedec_common: id1 0x00, id2
>> 0x00,
>> id1 parity violation, id1 is normal flash content, id2 is normal flash
>> content
>> Probing for Atmel AT29C512, 64 kB: probe_jedec_common: id1 0x00, id2
>> 0x00,
>> id1 parity violation, id1 is normal flash content, id2 is normal flash
>> content
>> Probing for Atmel AT29C010A, 128 kB: probe_jedec_common: id1 0x00, id2
>> 0x00,
>> id1 parity violation, id1 is normal flash content, id2 is normal flash
>> content
>> Probing for Atmel AT29C020, 256 kB: probe_jedec_common: id1 0x00, id2
>> 0x00,
>> id1 parity violation, id1 is normal flash content, id2 is normal flash
>> content
>> Probing for Atmel AT29C040A, 512 kB: probe_jedec_common: id1 0x00, id2
>> 0x00,
>> id1 parity violation, id1 is normal flash content, id2 is normal flash
>> content
>> Probing for Atmel AT49BV512, 64 kB: probe_jedec_common: id1 0x00, id2
>> 0x00,
>> id1 parity violation, id1 is normal flash content, id2 is normal flash
>> content
>> Probing for Atmel AT49F002(N), 256 kB: probe_jedec_common: id1 0x00, id2
>> 0x00, id1 parity violation, id1 is normal flash content, id2 is normal
>> flash
>> content
>> Probing for Atmel AT49F002(N)T, 256 kB: probe_jedec_common: id1 0x00,
>> id2
>> 0x00, id1 parity violation, id1 is normal flash content, id2 is normal
>> flash
>> content
>> Probing for Atmel AT49F020, 256 kB: probe_jedec_common: id1 0x00, id2
>> 0x00,
>> id1 parity violation, id1 is normal flash content, id2 is normal flash
>> content
>> Probing for Atmel AT49F040, 512 kB: probe_jedec_common: id1 0x00, id2
>> 0x00,
>> id1 parity violation, id1 is normal flash content, id2 is normal flash
>> content
>> Probing for Catalyst CAT28F512, 64 kB: probe_jedec_common: id1 0x00, id2
>> 0x00, id1 parity violation, id1 is normal flash content, id2 is normal
>> flash
>> content
>> Probing for Bright BM29F040, 512 kB: probe_jedec_common: id1 0x00, id2
>> 0x00,
>> id1 parity violation, id1 is normal flash content, id2 is normal flash
>> content
>> Probing for EMST F49B002UA, 256 kB: probe_jedec_common: id1 0x00, id2
>> 0x00,
>> id1 parity violation, id1 is normal flash content, id2 is normal flash
>> content
>> Probing for Eon EN29F010, 128 kB: probe_jedec_common: id1 0x00, id2
>> 0x00,
>> id1 parity violation, id1 is normal flash content, id2 is normal flash
>> content
>> Probing for Eon EN29F002(A)(N)B, 256 kB: probe_jedec_common: id1 0x00,
>> id2
>> 0x00, id1 parity violation, id1 is normal flash content, id2 is normal
>> flash
>> content
>> Probing for Eon EN29F002(A)(N)T, 256 kB: probe_jedec_common: id1 0x00,
>> id2
>> 0x00, id1 parity violation, id1 is normal flash content, id2 is normal
>> flash
>> content
>> Probing for Eon EN29LV640B, 8192 kB: probe_en29lv640b: id1 0x0000, id2
>> 0x0000
>> Probing for Fujitsu MBM29F004BC, 512 kB: probe_jedec_common: id1 0x00,
>> id2
>> 0x00, id1 parity violation, id1 is normal flash content, id2 is normal
>> flash
>> content
>> Probing for Fujitsu MBM29F004TC, 512 kB: probe_jedec_common: id1 0x00,
>> id2
>> 0x00, id1 parity violation, id1 is normal flash content, id2 is normal
>> flash
>> content
>> Probing for Fujitsu MBM29F400BC, 512 kB: probe_m29f400bt: id1 0x00, id2
>> 0x00
>> Probing for Fujitsu MBM29F400TC, 512 kB: probe_m29f400bt: id1 0x00, id2
>> 0x00
>> Probing for Hyundai HY29F002T, 256 kB: probe_jedec_common: id1 0x00, id2
>> 0x00, id1 parity violation, id1 is normal flash content, id2 is normal
>> flash
>> content
>> Probing for Hyundai HY29F002B, 256 kB: probe_jedec_common: id1 0x00, id2
>> 0x00, id1 parity violation, id1 is normal flash content, id2 is normal
>> flash
>> content
>> Probing for Hyundai HY29F040A, 512 kB: probe_jedec_common: id1 0x00, id2
>> 0x00, id1 parity violation, id1 is normal flash content, id2 is normal
>> flash
>> content
>> Probing for Intel 28F001BN/BX-B, 128 kB: probe_jedec_common: id1 0x00,
>> id2
>> 0x00, id1 parity violation, id1 is normal flash content, id2 is normal
>> flash
>> content
>> Probing for Intel 28F001BN/BX-T, 128 kB: probe_jedec_common: id1 0x00,
>> id2
>> 0x00, id1 parity violation, id1 is normal flash content, id2 is normal
>> flash
>> content
>> Probing for Intel 28F002BC/BL/BV/BX-T, 256 kB: probe_82802ab: id1 0x00,
>> id2
>> 0x00, id1 parity violation, id1 is normal flash content, id2 is normal
>> flash
>> content
>> Probing for Intel 28F008S3/S5/SC, 512 kB: probe_82802ab: id1 0x00, id2
>> 0x00,
>> id1 parity violation, id1 is normal flash content, id2 is normal flash
>> content
>> Probing for Intel 28F004B5/BE/BV/BX-B, 512 kB: probe_82802ab: id1 0x00,
>> id2
>> 0x00, id1 parity violation, id1 is normal flash content, id2 is normal
>> flash
>> content
>> Probing for Intel 28F004B5/BE/BV/BX-T, 512 kB: probe_82802ab: id1 0x00,
>> id2
>> 0x00, id1 parity violation, id1 is normal flash content, id2 is normal
>> flash
>> content
>> Probing for Intel 28F400BV/BX/CE/CV-B, 512 kB: probe_82802ab: id1 0x00,
>> id2
>> 0x00, id1 parity violation, id1 is normal flash content, id2 is normal
>> flash
>> content
>> Probing for Intel 28F400BV/BX/CE/CV-T, 512 kB: probe_82802ab: id1 0x00,
>> id2
>> 0x00, id1 parity violation, id1 is normal flash content, id2 is normal
>> flash
>> content
>> Probing for Macronix MX29F001B, 128 kB: probe_jedec_common: id1 0x00,
>> id2
>> 0x00, id1 parity violation, id1 is normal flash content, id2 is normal
>> flash
>> content
>> Probing for Macronix MX29F001T, 128 kB: probe_jedec_common: id1 0x00,
>> id2
>> 0x00, id1 parity violation, id1 is normal flash content, id2 is normal
>> flash
>> content
>> Probing for Macronix MX29F002(N)B, 256 kB: probe_jedec_common: id1
>> 0x00, id2
>> 0x00, id1 parity violation, id1 is normal flash content, id2 is normal
>> flash
>> content
>> Probing for Macronix MX29F002(N)T, 256 kB: probe_jedec_common: id1
>> 0x00, id2
>> 0x00, id1 parity violation, id1 is normal flash content, id2 is normal
>> flash
>> content
>> Probing for Macronix MX29F040, 512 kB: probe_jedec_common: id1 0x00, id2
>> 0x00, id1 parity violation, id1 is normal flash content, id2 is normal
>> flash
>> content
>> Probing for Macronix MX29LV040, 512 kB: probe_jedec_common: id1 0x00,
>> id2
>> 0x00, id1 parity violation, id1 is normal flash content, id2 is normal
>> flash
>> content
>> Probing for MoselVitelic V29C51000B, 64 kB: probe_jedec_common: id1
>> 0x00,
>> id2 0x00, id1 parity violation, id1 is normal flash content, id2 is
>> normal
>> flash content
>> Probing for MoselVitelic V29C51000T, 64 kB: probe_jedec_common: id1
>> 0x00,
>> id2 0x00, id1 parity violation, id1 is normal flash content, id2 is
>> normal
>> flash content
>> Probing for MoselVitelic V29C51400B, 512 kB: probe_jedec_common: id1
>> 0x00,
>> id2 0x00, id1 parity violation, id1 is normal flash content, id2 is
>> normal
>> flash content
>> Probing for MoselVitelic V29C51400T, 512 kB: probe_jedec_common: id1
>> 0x00,
>> id2 0x00, id1 parity violation, id1 is normal flash content, id2 is
>> normal
>> flash content
>> Probing for MoselVitelic V29LC51000, 64 kB: probe_jedec_common: id1
>> 0x00,
>> id2 0x00, id1 parity violation, id1 is normal flash content, id2 is
>> normal
>> flash content
>> Probing for MoselVitelic V29LC51001, 128 kB: probe_jedec_common: id1
>> 0x00,
>> id2 0x00, id1 parity violation, id1 is normal flash content, id2 is
>> normal
>> flash content
>> Probing for MoselVitelic V29LC51002, 256 kB: probe_jedec_common: id1
>> 0x00,
>> id2 0x00, id1 parity violation, id1 is normal flash content, id2 is
>> normal
>> flash content
>> Probing for PMC Pm29F002T, 256 kB: Chip lacks correct probe timing
>> information, using default 10mS/40uS. probe_jedec_common: id1 0x00, id2
>> 0x00, id1 parity violation, id1 is normal flash content, id2 is normal
>> flash
>> content
>> Probing for PMC Pm29F002B, 256 kB: Chip lacks correct probe timing
>> information, using default 10mS/40uS. probe_jedec_common: id1 0x00, id2
>> 0x00, id1 parity violation, id1 is normal flash content, id2 is normal
>> flash
>> content
>> Probing for PMC Pm39LV010, 128 kB: probe_jedec_common: id1 0x00, id2
>> 0x00,
>> id1 parity violation, id1 is normal flash content, id2 is normal flash
>> content
>> Probing for PMC Pm39LV020, 256 kB: probe_jedec_common: id1 0x00, id2
>> 0x00,
>> id1 parity violation, id1 is normal flash content, id2 is normal flash
>> content
>> Probing for PMC Pm39LV040, 512 kB: probe_jedec_common: id1 0x00, id2
>> 0x00,
>> id1 parity violation, id1 is normal flash content, id2 is normal flash
>> content
>> Probing for PMC Pm39LV512, 64 kB: probe_jedec_common: id1 0x00, id2
>> 0x00,
>> id1 parity violation, id1 is normal flash content, id2 is normal flash
>> content
>> Probing for Sharp LH28F008BJT-BTLZ1, 1024 kB: probe_82802ab: id1 0x00,
>> id2
>> 0x00, id1 parity violation, id1 is normal flash content, id2 is normal
>> flash
>> content
>> Probing for SST SST28SF040A, 512 kB: probe_82802ab: id1 0x00, id2 0x00,
>> id1
>> parity violation, id1 is normal flash content, id2 is normal flash
>> content
>> Probing for SST SST29EE010, 128 kB: probe_jedec_common: id1 0x00, id2
>> 0x00,
>> id1 parity violation, id1 is normal flash content, id2 is normal flash
>> content
>> Probing for SST SST29LE010, 128 kB: probe_jedec_common: id1 0x00, id2
>> 0x00,
>> id1 parity violation, id1 is normal flash content, id2 is normal flash
>> content
>> Probing for SST SST29EE020A, 256 kB: probe_jedec_common: id1 0x00, id2
>> 0x00,
>> id1 parity violation, id1 is normal flash content, id2 is normal flash
>> content
>> Probing for SST SST29LE020, 256 kB: probe_jedec_common: id1 0x00, id2
>> 0x00,
>> id1 parity violation, id1 is normal flash content, id2 is normal flash
>> content
>> Probing for SST SST39SF512, 64 kB: probe_jedec_common: id1 0x00, id2
>> 0x00,
>> id1 parity violation, id1 is normal flash content, id2 is normal flash
>> content
>> Probing for SST SST39SF010A, 128 kB: probe_jedec_common: id1 0x00, id2
>> 0x00,
>> id1 parity violation, id1 is normal flash content, id2 is normal flash
>> content
>> Probing for SST SST39SF020A, 256 kB: probe_jedec_common: id1 0x00, id2
>> 0x00,
>> id1 parity violation, id1 is normal flash content, id2 is normal flash
>> content
>> Probing for SST SST39SF040, 512 kB: probe_jedec_common: id1 0x00, id2
>> 0x00,
>> id1 parity violation, id1 is normal flash content, id2 is normal flash
>> content
>> Probing for SST SST39VF512, 64 kB: probe_jedec_common: id1 0x00, id2
>> 0x00,
>> id1 parity violation, id1 is normal flash content, id2 is normal flash
>> content
>> Probing for SST SST39VF010, 128 kB: probe_jedec_common: id1 0x00, id2
>> 0x00,
>> id1 parity violation, id1 is normal flash content, id2 is normal flash
>> content
>> Probing for SST SST39VF020, 256 kB: probe_jedec_common: id1 0x00, id2
>> 0x00,
>> id1 parity violation, id1 is normal flash content, id2 is normal flash
>> content
>> Probing for SST SST39VF040, 512 kB: probe_jedec_common: id1 0x00, id2
>> 0x00,
>> id1 parity violation, id1 is normal flash content, id2 is normal flash
>> content
>> Probing for SST SST39VF080, 1024 kB: probe_jedec_common: id1 0x00, id2
>> 0x00,
>> id1 parity violation, id1 is normal flash content, id2 is normal flash
>> content
>> Probing for ST M29F002B, 256 kB: probe_jedec_common: id1 0x00, id2
>> 0x00, id1
>> parity violation, id1 is normal flash content, id2 is normal flash
>> content
>> Probing for ST M29F002T/NT, 256 kB: probe_jedec_common: id1 0x00, id2
>> 0x00,
>> id1 parity violation, id1 is normal flash content, id2 is normal flash
>> content
>> Probing for ST M29F040B, 512 kB: probe_jedec_common: id1 0x00, id2
>> 0x00, id1
>> parity violation, id1 is normal flash content, id2 is normal flash
>> content
>> Probing for ST M29F400BB, 512 kB: probe_m29f400bt: id1 0x00, id2 0x00
>> Probing for ST M29F400BT, 512 kB: probe_m29f400bt: id1 0x00, id2 0x00
>> Probing for ST M29W010B, 128 kB: probe_jedec_common: id1 0x00, id2
>> 0x00, id1
>> parity violation, id1 is normal flash content, id2 is normal flash
>> content
>> Probing for ST M29W040B, 512 kB: probe_jedec_common: id1 0x00, id2
>> 0x00, id1
>> parity violation, id1 is normal flash content, id2 is normal flash
>> content
>> Probing for ST M29W512B, 64 kB: probe_jedec_common: id1 0x00, id2 0x00,
>> id1
>> parity violation, id1 is normal flash content, id2 is normal flash
>> content
>> Probing for SyncMOS/MoselVitelic {F,S,V}29C51001B, 128 kB:
>> probe_jedec_common: id1 0x00, id2 0x00, id1 parity violation, id1 is
>> normal
>> flash content, id2 is normal flash content
>> Probing for SyncMOS/MoselVitelic {F,S,V}29C51001T, 128 kB:
>> probe_jedec_common: id1 0x00, id2 0x00, id1 parity violation, id1 is
>> normal
>> flash content, id2 is normal flash content
>> Probing for SyncMOS/MoselVitelic {F,S,V}29C51002B, 256 kB:
>> probe_jedec_common: id1 0x00, id2 0x00, id1 parity violation, id1 is
>> normal
>> flash content, id2 is normal flash content
>> Probing for SyncMOS/MoselVitelic {F,S,V}29C51002T, 256 kB:
>> probe_jedec_common: id1 0x00, id2 0x00, id1 parity violation, id1 is
>> normal
>> flash content, id2 is normal flash content
>> Probing for SyncMOS/MoselVitelic {F,S,V}29C51004B, 512 kB:
>> probe_jedec_common: id1 0x00, id2 0x00, id1 parity violation, id1 is
>> normal
>> flash content, id2 is normal flash content
>> Probing for SyncMOS/MoselVitelic {F,S,V}29C51004T, 512 kB:
>> probe_jedec_common: id1 0x00, id2 0x00, id1 parity violation, id1 is
>> normal
>> flash content, id2 is normal flash content
>> Probing for SyncMOS/MoselVitelic {S,V}29C31004B, 512 kB:
>> probe_jedec_common:
>> id1 0x00, id2 0x00, id1 parity violation, id1 is normal flash content,
>> id2
>> is normal flash content
>> Probing for SyncMOS/MoselVitelic {S,V}29C31004T, 512 kB:
>> probe_jedec_common:
>> id1 0x00, id2 0x00, id1 parity violation, id1 is normal flash content,
>> id2
>> is normal flash content
>> Probing for TI TMS29F002RB, 256 kB: probe_jedec_common: id1 0x00, id2
>> 0x00,
>> id1 parity violation, id1 is normal flash content, id2 is normal flash
>> content
>> Probing for TI TMS29F002RT, 256 kB: probe_jedec_common: id1 0x00, id2
>> 0x00,
>> id1 parity violation, id1 is normal flash content, id2 is normal flash
>> content
>> Probing for Winbond W29C010(M)/W29C011A/W29EE011/W29EE012-old, 128 kB:
>> Old
>> Winbond W29* probe method disabled because the probing sequence puts the
>> AMIC A49LF040A in a funky state. Use 'flashrom -c
>> W29C010(M)/W29C011A/W29EE011/W29EE012-old' if you have a board with
>> such a
>> chip.
>> Probing for Winbond W29C010(M)/W29C011A/W29EE011/W29EE012, 128 kB:
>> probe_jedec_common: id1 0x00, id2 0x00, id1 parity violation, id1 is
>> normal
>> flash content, id2 is normal flash content
>> Probing for Winbond W29C020(C)/W29C022, 256 kB: probe_jedec_common: id1
>> 0x00, id2 0x00, id1 parity violation, id1 is normal flash content, id2
>> is
>> normal flash content
>> Probing for Winbond W29C040/P, 512 kB: probe_jedec_common: id1 0x00, id2
>> 0x00, id1 parity violation, id1 is normal flash content, id2 is normal
>> flash
>> content
>> Probing for Winbond W39L040, 512 kB: probe_jedec_common: id1 0x00, id2
>> 0x00,
>> id1 parity violation, id1 is normal flash content, id2 is normal flash
>> content
>> Probing for Winbond W49F002U/N, 256 kB: probe_jedec_common: id1 0x00,
>> id2
>> 0x00, id1 parity violation, id1 is normal flash content, id2 is normal
>> flash
>> content
>> Probing for Winbond W49F020, 256 kB: probe_jedec_common: id1 0x00, id2
>> 0x00,
>> id1 parity violation, id1 is normal flash content, id2 is normal flash
>> content
>> No EEPROM/flash device found.
>> Note: flashrom can never write if the flash chip isn't found
>> automatically.
>> Restoring PCI config space for 00:0f:0 reg 0x58
>> pcilib: Cannot open (null)/devices/0000:00:0f.0/config
>>
>> HTH,
>> Roy
>>
>>
>> _______________________________________________
>> flashrom mailing list
>> flashrom at flashrom.org
>> http://www.flashrom.org/mailman/listinfo/flashrom
More information about the flashrom
mailing list