[flashrom] #7: Using serprog to flash a winbond W25Q16
flashrom
svn at flashrom.org
Wed Aug 22 01:21:07 CEST 2012
#7: Using serprog to flash a winbond W25Q16
--------------------------+----------------------------------
Reporter: anonymous | Owner: hailfinger
Type: defect | Status: new
Priority: major | Milestone: flashrom 0.9.2
Component: flashrom | Version: 0.9.0
Resolution: | Keywords: Single byte read
Dependencies: | Patch Status: there is no patch
--------------------------+----------------------------------
Comment (by anonymous):
Oh I forgot to mention, I'm using some header pins on the motherboard to
hook up to the arduino, the pins I have plugged in are: Vcc > 3.3v from
the arduino, Gnd > Gnd,
Miso > Pin12, Mosi > Pin11, Clock > Pin13, CS > Pin10. Those are the only
connections coming off the Header pins.
So to list what I have hooked up:
Miso
Mosi
VCC
Gnd
Clock
CS
Am I missing something on the chip that I need to plug in?
--
Ticket URL: <http://www.flashrom.org/trac/flashrom/ticket/7#comment:1>
flashrom <http://www.flashrom.org/>
More information about the flashrom
mailing list