[flashrom] #7: Using serprog to flash a winbond W25Q16

[flashrom]

#7: Using serprog to flash a winbond W25Q16
----------------------------------+-------------------------------
    Reporter:  anonymous          |         Owner:  hailfinger
        Type:  defect             |        Status:  new
    Priority:  major              |     Milestone:  flashrom 0.9.2
   Component:  flashrom           |       Version:  0.9.0
    Keywords:  Single byte read   |  Dependencies:
Patch Status:  there is no patch  |
----------------------------------+-------------------------------
 I am using an arduino Uno to flash a winbond W25Q16, and I'm getting an
 error: Single byte read not supported. I am using Flashrom v0.9.4-r1394,
 linux  3.0.0-12-generic (i686), built w/ libpci 3.1.7, Gcc 4.6.1.
 On an Ubuntu 11.10 32bit release. I get the error when I use:

 $ flashrom -p serprog:dev=/dev/ttyACM0:2000000 -w /home/jpl/716.rom

 or any command like reading the bios. Just looking for some help, I
 couldn't find anything when searching. Thanks. Brandon

-- 
Ticket URL: <http://www.flashrom.org/trac/flashrom/ticket/7>
flashrom <http://www.flashrom.org/>