[flashrom] SST25VF010A-33-4C-SAE supported?

[David Kiers]

Do you mean that both of the rdid probes should have returned the same value?
I'll have to find a way to make sure the flashrom is healthy and properly connected.
Thank you for your time!


On 02 Jun 2011, at 23:49, Stefan Tauner wrote:

> On Thu, 2 Jun 2011 23:32:18 +0200
> David Kiers <dk at telcosystems.net> wrote:
> 
>> oops:
>> dk at dk-AOA150:~$ flashrom -p buspirate_spi:dev=/dev/ttyUSB0, -V
>> […]
>> Probing for PMC unknown PMC SPI chip, 0 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff
>> Probing for SST unknown SST SPI chip, 0 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00
> 
> assuming that the buspirate itself and flashrom work correctly, you get
> either "all 1s" or "all 0s" on the miso pin for the same command. this
> clearly indicates a hardware problem.
> -- 
> Kind regards/Mit freundlichen Grüßen, Stefan Tauner