[flashrom] SST25VF010A-33-4C-SAE supported?
Stefan Tauner
stefan.tauner at student.tuwien.ac.at
Thu Jun 2 23:49:06 CEST 2011
On Thu, 2 Jun 2011 23:32:18 +0200
David Kiers <dk at telcosystems.net> wrote:
> oops:
> dk at dk-AOA150:~$ flashrom -p buspirate_spi:dev=/dev/ttyUSB0, -V
> […]
> Probing for PMC unknown PMC SPI chip, 0 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0xff, id2 0xffff
> Probing for SST unknown SST SPI chip, 0 kB: RDID byte 0 parity violation. probe_spi_rdid_generic: id1 0x00, id2 0x00
assuming that the buspirate itself and flashrom work correctly, you get
either "all 1s" or "all 0s" on the miso pin for the same command. this
clearly indicates a hardware problem.
--
Kind regards/Mit freundlichen Grüßen, Stefan Tauner
More information about the flashrom
mailing list