[flashrom] adding support for 82545GM (et al).

[Stefan Tauner]

On Mon, 1 Aug 2011 14:54:54 +0200
Stefan Tauner <stefan.tauner at student.tuwien.ac.at> wrote:

> i was able to probe the attached chip (SST39VF020) after adding the PCI
> ID, but reads returned all 0xFF. i need to verify that this is not
> correct, but i am quite certain that there is a working bootrom in
> there.

i forgot to mention a small detail in my first mail. i started by
adding the pci id to nicintel_spi.c instead of nicintel.c because i
thought: gigabit - probably spi flash.
but that was wrong.

that was a happenstance though, because i now discovered that it needs
a write enable just like the one in nicintel_spi_init.

after adding the pci ids to both, trying to probe with the spi code
(which would loop forever) to write enable the nic...

root at testink:~/flashrom/git-svn# dd if=/dev/urandom of=../256kb_rand.img bs=1k count=256
256+0 records in
256+0 records out
262144 bytes (262 kB) copied, 0.0576867 s, 4.5 MB/s
root at testink:~/flashrom/git-svn# ./flashrom -p nicintel -VV -w ../256kb_rand.img
flashrom v0.9.4-r1401 on Linux 2.6.38-10-generic (i686), built with libpci 3.1.7, GCC 4.5.2, little endian
flashrom is free software, get the source code at http://www.flashrom.org

Calibrating delay loop... OS timer resolution is 1 usecs, 1803M loops per second, 10 myus = 11 us, 100 myus = 106 us, 1000 myus = 999 us, 10000 myus = 10052 us, 4 myus = 5 us, OK.
Initializing nicintel programmer
Found "Intel 82545GM Gigabit Ethernet Controller (fiber)" (8086:1027, BDF 01:0b.0).
PCI header type 0x00
Requested BAR is MEM, 64bit, not prefetchable
===
This PCI device is UNTESTED. Please report the 'flashrom -p xxxx' output 
to flashrom at flashrom.org if it works for you. Please add the name of your
PCI device to the subject. Thank you for your help!
===
Found "Intel 82545GM Gigabit Ethernet Controller (fiber)" (8086:1027, BDF 01:0b.0).
PCI header type 0x00
Requested BAR is MEM, 64bit, not prefetchable
===
This PCI device is UNTESTED. Please report the 'flashrom -p xxxx' output 
to flashrom at flashrom.org if it works for you. Please add the name of your
PCI device to the subject. Thank you for your help!
===
Mapping Intel NIC control/status reg at 0xfe5c0000, unaligned size 0x10.
[…]
Probing for SST SST39VF010, 128 kB: probe_jedec_common: id1 0xbf, id2 0xd6
Probing for SST SST39VF020, 256 kB: probe_jedec_common: id1 0xbf, id2 0xd6
Found SST flash chip "SST39VF020" (256 kB, Parallel) on nicintel.
Probing for SST SST39VF040, 512 kB: probe_jedec_common: id1 0xbf, id2 0xd6 
Probing for SST SST39VF080, 1024 kB: Chip size 1024 kB is bigger than supported size 512 kB of chipset/board/programmer for Parallel interface, probe/read/erase/write may fail. probe_jedec_common: id1 0xbf, id2 0xd6
[…]
===
This flash part has status UNTESTED for operations: READ ERASE WRITE
The test status of this chip may have been updated in the latest
development version of flashrom. If you are running the latest
development version, please email a report to flashrom at flashrom.org if
any of the above operations work correctly for you with this flash
part. Please include the flashrom output with the additional -V option
for all operations you tested (-V, -Vr, -Vw, -VE), and mention which
mainboard or programmer you tested. Please mention your board in the
subject line. Thanks for your help! Reading old flash chip contents...
done. Erasing and writing flash chip... Trying erase function 0...
0x000000-0x000fff:W, 0x001000-0x001fff:W, 0x002000-0x002fff:W, 0x003000-0x003fff:W, 0x004000-0x004fff:W, 0x005000-0x005fff:W, 0x006000-0x006fff:W, 0x007000-0x007fff:W, 0x008000-0x008fff:W, 0x009000-0x009fff:W, 0x00a000-0x00afff:W, 0x00b000-0x00bfff:W, 0x00c000-0x00cfff:W, 0x00d000-0x00dfff:W, 0x00e000-0x00efff:W, 0x00f000-0x00ffff:W, 0x010000-0x010fff:W, 0x011000-0x011fff:W, 0x012000-0x012fff:W, 0x013000-0x013fff:W, 0x014000-0x014fff:W, 0x015000-0x015fff:W, 0x016000-0x016fff:W, 0x017000-0x017fff:W, 0x018000-0x018fff:W, 0x019000-0x019fff:W, 0x01a000-0x01afff:W, 0x01b000-0x01bfff:W, 0x01c000-0x01cfff:W, 0x01d000-0x01dfff:W, 0x01e000-0x01efff:W, 0x01f000-0x01ffff:W, 0x020000-0x020fff:W, 0x021000-0x021fff:W, 0x022000-0x022fff:W, 0x023000-0x023fff:W, 0x024000-0x024fff:W, 0x025000-0x025fff:W, 0x026000-0x026fff:W, 0x027000-0x027fff:W, 0x028000-0x028fff:W, 0x029000-0x029fff:W, 0x02a000-0x02afff:W, 0x02b000-0x02bfff:W, 0x02c000-0x02cfff:W, 0x02d000-0x02dfff:W, 0x02e000-0x02efff:W, 0x02f000-0x02ffff:W, 0x030000-0x030fff:W, 0x031000-0x031fff:W, 0x032000-0x032fff:W, 0x033000-0x033fff:W, 0x034000-0x034fff:W, 0x035000-0x035fff:W, 0x036000-0x036fff:W, 0x037000-0x037fff:W, 0x038000-0x038fff:W, 0x039000-0x039fff:W, 0x03a000-0x03afff:W, 0x03b000-0x03bfff:W, 0x03c000-0x03cfff:W, 0x03d000-0x03dfff:W, 0x03e000-0x03efff:W, 0x03f000-0x03ffff:W
Erase/write done.
Verifying flash... VERIFIED.          
Restoring MMIO space at 0xb77f300c

i then flashed another random image and flashrom tried to erase too
(instead of skipping it like above). that also succeeded, yay.

of course for full, mergeable support we need to hook up the nic enable
somehow... any suggestions?
-- 
Kind regards/Mit freundlichen Grüßen, Stefan Tauner