[flashrom] [PATCH] Try to handle non-x86 sanely
Carl-Daniel Hailfinger
c-d.hailfinger.devel.2006 at gmx.net
Fri Mar 26 05:13:44 CET 2010
Misha Manulis asked for satasii support on PPC and on IRC we gave him
some hints to hack up something that works for ppc only and satasii
only. His patch can be found here: http://coreboot.pastebin.com/fuLk1FCA
Here is a patch which does everything The Right Way (TM) and uses proper
abstraction for satasii and compiles all x86 specific stuff only on x86.
Huge thanks go to Segher Boessenkool who provided valuable info about
all the endianness trickery (especially preprocessor macros) and tested
8 iterations of the code on Linux/PPC.
On 26.03.2010 01:51, Carl-Daniel Hailfinger wrote:
> flashrom is very x86 centric. It does work on other architectures if you
> get it to compile. Try to fix the all errors on ppc for a
> full build.
>
> Should work in theory with a default build if you exclude nic3com.
> Will pretty sure break compilation on Alpha.
>
This one should compile on ppc, I even expect it to work for satasii on ppc.
AFAICS all programmer drivers except nic3com should work.
Compile with
make distclean
make NIC3COM=no
Known bugs:
x86 is broken by this patch because the Makefile excludes the x86
specific internal files. If you want to test this patch on x86 (to make
sure I didn't break everything), change
#PROGRAMMER_OBJS += it87spi.o ichspi.o sb600spi.o wbsio_spi.o
to
PROGRAMMER_OBJS += it87spi.o ichspi.o sb600spi.o wbsio_spi.o
boards_ok and boards_bad has no x86 guard yet and will end up in
flashrom -L output.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006 at gmx.net>
Index: flashrom-ioport_x86_only/hwaccess.c
===================================================================
--- flashrom-ioport_x86_only/hwaccess.c (Revision 984)
+++ flashrom-ioport_x86_only/hwaccess.c (Arbeitskopie)
@@ -26,6 +26,8 @@
#include <errno.h>
#include "flash.h"
+#if defined(__i386__) || defined(__x86_64__)
+
#if defined(__FreeBSD__) || defined(__DragonFly__)
int io_fd;
#endif
@@ -54,6 +56,22 @@
#endif
}
+#elif defined(__powerpc__) || defined(__powerpc64__) || defined(__ppc__) || defined(__ppc64__)
+
+void get_io_perms(void)
+{
+}
+
+void release_io_perms(void)
+{
+}
+
+#else
+
+#error Unknown architecture
+
+#endif
+
#ifdef __DJGPP__
extern unsigned short segFS;
@@ -122,3 +140,33 @@
return *(volatile uint32_t *) addr;
}
#endif
+
+void mmio_le_writeb(uint8_t val, void *addr)
+{
+ mmio_writeb(cpu_to_le8(val), addr);
+}
+
+void mmio_le_writew(uint16_t val, void *addr)
+{
+ mmio_writeb(cpu_to_le16(val), addr);
+}
+
+void mmio_le_writel(uint32_t val, void *addr)
+{
+ mmio_writeb(cpu_to_le32(val), addr);
+}
+
+uint8_t mmio_le_readb(void *addr)
+{
+ return le_to_cpu8(mmio_readb(addr));
+}
+
+uint16_t mmio_le_readw(void *addr)
+{
+ return le_to_cpu16(mmio_readw(addr));
+}
+
+uint32_t mmio_le_readl(void *addr)
+{
+ return le_to_cpu32(mmio_readl(addr));
+}
Index: flashrom-ioport_x86_only/flash.h
===================================================================
--- flashrom-ioport_x86_only/flash.h (Revision 984)
+++ flashrom-ioport_x86_only/flash.h (Arbeitskopie)
@@ -59,8 +59,10 @@
PROGRAMMER_ATAHPT,
#endif
#if INTERNAL_SUPPORT == 1
+#if defined(__i386__) || defined(__x86_64__)
PROGRAMMER_IT87SPI,
#endif
+#endif
#if FT2232_SPI_SUPPORT == 1
PROGRAMMER_FT2232SPI,
#endif
@@ -402,6 +404,12 @@
uint8_t mmio_readb(void *addr);
uint16_t mmio_readw(void *addr);
uint32_t mmio_readl(void *addr);
+void mmio_le_writeb(uint8_t val, void *addr);
+void mmio_le_writew(uint16_t val, void *addr);
+void mmio_le_writel(uint32_t val, void *addr);
+uint8_t mmio_le_readb(void *addr);
+uint16_t mmio_le_readw(void *addr);
+uint32_t mmio_le_readl(void *addr);
/* programmer.c */
int noop_shutdown(void);
@@ -585,6 +593,7 @@
enum spi_controller {
SPI_CONTROLLER_NONE,
#if INTERNAL_SUPPORT == 1
+#if defined(__i386__) || defined(__x86_64__)
SPI_CONTROLLER_ICH7,
SPI_CONTROLLER_ICH9,
SPI_CONTROLLER_IT87XX,
@@ -592,6 +601,7 @@
SPI_CONTROLLER_VIA,
SPI_CONTROLLER_WBSIO,
#endif
+#endif
#if FT2232_SPI_SUPPORT == 1
SPI_CONTROLLER_FT2232,
#endif
Index: flashrom-ioport_x86_only/spi25.c
===================================================================
--- flashrom-ioport_x86_only/spi25.c (Revision 984)
+++ flashrom-ioport_x86_only/spi25.c (Arbeitskopie)
@@ -172,12 +172,14 @@
/* only some SPI chipsets support 4 bytes commands */
switch (spi_controller) {
#if INTERNAL_SUPPORT == 1
+#if defined(__i386__) || defined(__x86_64__)
case SPI_CONTROLLER_ICH7:
case SPI_CONTROLLER_ICH9:
case SPI_CONTROLLER_VIA:
case SPI_CONTROLLER_SB600:
case SPI_CONTROLLER_WBSIO:
#endif
+#endif
#if FT2232_SPI_SUPPORT == 1
case SPI_CONTROLLER_FT2232:
#endif
@@ -950,11 +952,13 @@
switch (spi_controller) {
#if INTERNAL_SUPPORT == 1
+#if defined(__i386__) || defined(__x86_64__)
case SPI_CONTROLLER_WBSIO:
msg_cerr("%s: impossible with Winbond SPI masters,"
" degrading to byte program\n", __func__);
return spi_chip_write_1(flash, buf);
#endif
+#endif
default:
break;
}
Index: flashrom-ioport_x86_only/hwaccess.h
===================================================================
--- flashrom-ioport_x86_only/hwaccess.h (Revision 984)
+++ flashrom-ioport_x86_only/hwaccess.h (Arbeitskopie)
@@ -24,13 +24,88 @@
#ifndef __HWACCESS_H__
#define __HWACCESS_H__ 1
+#if defined (__i386__) || defined (__x86_64__)
#if defined(__GLIBC__)
#include <sys/io.h>
#endif
+#endif
+
#if NEED_PCI == 1
#include <pci/pci.h>
#endif
+#define ___constant_swab8(x) ((uint8_t)( \
+ (((uint8_t)(x) & (uint8_t)0xffU))))
+
+#define ___constant_swab16(x) ((uint16_t)( \
+ (((uint16_t)(x) & (uint16_t)0x00ffU) << 8) | \
+ (((uint16_t)(x) & (uint16_t)0xff00U) >> 8)))
+
+#define ___constant_swab32(x) ((uint32_t)( \
+ (((uint32_t)(x) & (uint32_t)0x000000ffUL) << 24) | \
+ (((uint32_t)(x) & (uint32_t)0x0000ff00UL) << 8) | \
+ (((uint32_t)(x) & (uint32_t)0x00ff0000UL) >> 8) | \
+ (((uint32_t)(x) & (uint32_t)0xff000000UL) >> 24)))
+
+#define ___constant_swab64(x) ((uint64_t)( \
+ (((uint64_t)(x) & (uint64_t)0x00000000000000ffULL) << 56) | \
+ (((uint64_t)(x) & (uint64_t)0x000000000000ff00ULL) << 40) | \
+ (((uint64_t)(x) & (uint64_t)0x0000000000ff0000ULL) << 24) | \
+ (((uint64_t)(x) & (uint64_t)0x00000000ff000000ULL) << 8) | \
+ (((uint64_t)(x) & (uint64_t)0x000000ff00000000ULL) >> 8) | \
+ (((uint64_t)(x) & (uint64_t)0x0000ff0000000000ULL) >> 24) | \
+ (((uint64_t)(x) & (uint64_t)0x00ff000000000000ULL) >> 40) | \
+ (((uint64_t)(x) & (uint64_t)0xff00000000000000ULL) >> 56)))
+
+#if defined (_BIG_ENDIAN) || defined (__BIG_ENDIAN__)
+
+#define cpu_to_le(bits) \
+static inline uint##bits##_t cpu_to_le##bits(uint##bits##_t val) \
+{ \
+ return ___constant_swab##bits(val); \
+}
+
+cpu_to_le(8)
+cpu_to_le(16)
+cpu_to_le(32)
+cpu_to_le(64)
+
+#define cpu_to_be8
+#define cpu_to_be16
+#define cpu_to_be32
+#define cpu_to_be64
+
+#else
+
+#define cpu_to_be(bits) \
+static inline uint##bits##_t cpu_to_be##bits(uint##bits##_t val) \
+{ \
+ return ___constant_swab##bits(val); \
+}
+
+cpu_to_be(8)
+cpu_to_be(16)
+cpu_to_be(32)
+cpu_to_be(64)
+
+#define cpu_to_le8
+#define cpu_to_le16
+#define cpu_to_le32
+#define cpu_to_le64
+
+#endif
+
+#define be_to_cpu8 cpu_to_be8
+#define be_to_cpu16 cpu_to_be16
+#define be_to_cpu32 cpu_to_be32
+#define be_to_cpu64 cpu_to_be64
+#define le_to_cpu8 cpu_to_le8
+#define le_to_cpu16 cpu_to_le16
+#define le_to_cpu32 cpu_to_le32
+#define le_to_cpu64 cpu_to_le64
+
+#if defined (__i386__) || defined (__x86_64__)
+
/* for iopl and outb under Solaris */
#if defined (__sun) && (defined(__i386) || defined(__amd64))
#include <strings.h>
@@ -162,4 +237,11 @@
int freebsd_wrmsr(int addr, msr_t msr);
#endif
+#elif defined(__powerpc__) || defined(__powerpc64__) || defined(__ppc__) || defined(__ppc64__)
+/* Port I/O is not available on PowerPC. */
+
+#else
+#error Unknown architecture
+#endif
+
#endif /* !__HWACCESS_H__ */
Index: flashrom-ioport_x86_only/physmap.c
===================================================================
--- flashrom-ioport_x86_only/physmap.c (Revision 984)
+++ flashrom-ioport_x86_only/physmap.c (Arbeitskopie)
@@ -238,6 +238,8 @@
return physmap_common(descr, phys_addr, len, PHYSMAP_MAYFAIL, PHYSMAP_RO);
}
+#if defined(__i386__) || defined(__x86_64__)
+
#ifdef __linux__
/*
* Reading and writing to MSRs, however requires instructions rdmsr/wrmsr,
@@ -455,4 +457,6 @@
#endif
#endif
#endif
-
+#else
+/* Does MSR exist on non-x86 architectures? */
+#endif
Index: flashrom-ioport_x86_only/spi.c
===================================================================
--- flashrom-ioport_x86_only/spi.c (Revision 984)
+++ flashrom-ioport_x86_only/spi.c (Arbeitskopie)
@@ -42,6 +42,7 @@
},
#if INTERNAL_SUPPORT == 1
+#if defined(__i386__) || defined(__x86_64__)
{ /* SPI_CONTROLLER_ICH7 */
.command = ich_spi_send_command,
.multicommand = ich_spi_send_multicommand,
@@ -84,6 +85,7 @@
.write_256 = wbsio_spi_write_1,
},
#endif
+#endif
#if FT2232_SPI_SUPPORT == 1
{ /* SPI_CONTROLLER_FT2232 */
Index: flashrom-ioport_x86_only/nic3com.c
===================================================================
--- flashrom-ioport_x86_only/nic3com.c (Revision 984)
+++ flashrom-ioport_x86_only/nic3com.c (Arbeitskopie)
@@ -23,6 +23,8 @@
#include <sys/types.h>
#include "flash.h"
+#if defined(__i386__) || defined(__x86_64__)
+
#define BIOS_ROM_ADDR 0x04
#define BIOS_ROM_DATA 0x08
#define INT_STATUS 0x0e
@@ -112,3 +114,7 @@
OUTL((uint32_t)addr, io_base_addr + BIOS_ROM_ADDR);
return INB(io_base_addr + BIOS_ROM_DATA);
}
+
+#else
+#error Unknown architecture
+#endif
Index: flashrom-ioport_x86_only/Makefile
===================================================================
--- flashrom-ioport_x86_only/Makefile (Revision 984)
+++ flashrom-ioport_x86_only/Makefile (Arbeitskopie)
@@ -121,7 +121,8 @@
ifeq ($(CONFIG_INTERNAL), yes)
FEATURE_CFLAGS += -D'INTERNAL_SUPPORT=1'
-PROGRAMMER_OBJS += chipset_enable.o board_enable.o cbtable.o dmi.o it87spi.o ichspi.o sb600spi.o wbsio_spi.o internal.o
+PROGRAMMER_OBJS += chipset_enable.o board_enable.o cbtable.o dmi.o internal.o
+#PROGRAMMER_OBJS += it87spi.o ichspi.o sb600spi.o wbsio_spi.o
NEED_PCI := yes
endif
@@ -253,7 +254,7 @@
rm -f .dependencies .features .libdeps
dep:
- @$(CC) $(CPPFLAGS) $(SVNDEF) -MM *.c > .dependencies
+ @$(CC) $(CPPFLAGS) $(SVNDEF) -MM $(OBJS:.o=.c) > .dependencies
strip: $(PROGRAM)
$(STRIP) $(STRIP_ARGS) $(PROGRAM)
Index: flashrom-ioport_x86_only/satasii.c
===================================================================
--- flashrom-ioport_x86_only/satasii.c (Revision 984)
+++ flashrom-ioport_x86_only/satasii.c (Arbeitskopie)
@@ -62,7 +62,7 @@
sii_bar = physmap("SATA SIL registers", addr, 0x100) + reg_offset;
/* Check if ROM cycle are OK. */
- if ((id != 0x0680) && (!(mmio_readl(sii_bar) & (1 << 26))))
+ if ((id != 0x0680) && (!(mmio_le_readl(sii_bar) & (1 << 26))))
msg_pinfo("Warning: Flash seems unconnected.\n");
buses_supported = CHIP_BUSTYPE_PARALLEL;
@@ -82,32 +82,32 @@
{
uint32_t ctrl_reg, data_reg;
- while ((ctrl_reg = mmio_readl(sii_bar)) & (1 << 25)) ;
+ while ((ctrl_reg = mmio_le_readl(sii_bar)) & (1 << 25)) ;
/* Mask out unused/reserved bits, set writes and start transaction. */
ctrl_reg &= 0xfcf80000;
ctrl_reg |= (1 << 25) | (0 << 24) | ((uint32_t) addr & 0x7ffff);
- data_reg = (mmio_readl((sii_bar + 4)) & ~0xff) | val;
- mmio_writel(data_reg, (sii_bar + 4));
- mmio_writel(ctrl_reg, sii_bar);
+ data_reg = (mmio_le_readl((sii_bar + 4)) & ~0xff) | val;
+ mmio_le_writel(data_reg, (sii_bar + 4));
+ mmio_le_writel(ctrl_reg, sii_bar);
- while (mmio_readl(sii_bar) & (1 << 25)) ;
+ while (mmio_le_readl(sii_bar) & (1 << 25)) ;
}
uint8_t satasii_chip_readb(const chipaddr addr)
{
uint32_t ctrl_reg;
- while ((ctrl_reg = mmio_readl(sii_bar)) & (1 << 25)) ;
+ while ((ctrl_reg = mmio_le_readl(sii_bar)) & (1 << 25)) ;
/* Mask out unused/reserved bits, set reads and start transaction. */
ctrl_reg &= 0xfcf80000;
ctrl_reg |= (1 << 25) | (1 << 24) | ((uint32_t) addr & 0x7ffff);
- mmio_writel(ctrl_reg, sii_bar);
+ mmio_le_writel(ctrl_reg, sii_bar);
- while (mmio_readl(sii_bar) & (1 << 25)) ;
+ while (mmio_le_readl(sii_bar) & (1 << 25)) ;
- return (mmio_readl(sii_bar + 4)) & 0xff;
+ return (mmio_le_readl(sii_bar + 4)) & 0xff;
}
Index: flashrom-ioport_x86_only/chipset_enable.c
===================================================================
--- flashrom-ioport_x86_only/chipset_enable.c (Revision 984)
+++ flashrom-ioport_x86_only/chipset_enable.c (Arbeitskopie)
@@ -34,6 +34,8 @@
#include <fcntl.h>
#include "flash.h"
+#if defined(__i386__) || defined(__x86_64__)
+
extern int ichspi_lock;
static int enable_flash_ali_m1533(struct pci_dev *dev, const char *name)
@@ -1285,8 +1287,11 @@
return 0;
}
+#endif
+
/* Please keep this list alphabetically sorted by vendor/device. */
const struct penable chipset_enables[] = {
+#if defined(__i386__) || defined(__x86_64__)
{0x10B9, 0x1533, OK, "ALi", "M1533", enable_flash_ali_m1533},
{0x1022, 0x7440, OK, "AMD", "AMD-768", enable_flash_amd8111},
{0x1022, 0x7468, OK, "AMD", "AMD8111", enable_flash_amd8111},
@@ -1417,7 +1422,7 @@
{0x1106, 0x0596, OK, "VIA", "VT82C596", enable_flash_amd8111},
{0x1106, 0x0586, OK, "VIA", "VT82C586A/B", enable_flash_amd8111},
{0x1106, 0x0686, NT, "VIA", "VT82C686A/B", enable_flash_amd8111},
-
+#endif
{},
};
Index: flashrom-ioport_x86_only/flashrom.c
===================================================================
--- flashrom-ioport_x86_only/flashrom.c (Revision 984)
+++ flashrom-ioport_x86_only/flashrom.c (Arbeitskopie)
@@ -233,6 +233,7 @@
#endif
#if INTERNAL_SUPPORT == 1
+#if defined(__i386__) || defined(__x86_64__)
{
.name = "it87spi",
.init = it87spi_init,
@@ -250,6 +251,7 @@
.delay = internal_delay,
},
#endif
+#endif
#if FT2232_SPI_SUPPORT == 1
{
Index: flashrom-ioport_x86_only/internal.c
===================================================================
--- flashrom-ioport_x86_only/internal.c (Revision 984)
+++ flashrom-ioport_x86_only/internal.c (Arbeitskopie)
@@ -99,9 +99,11 @@
#endif
#if INTERNAL_SUPPORT == 1
-struct superio superio = {};
int force_boardenable = 0;
+#if defined(__i386__) || defined(__x86_64__)
+struct superio superio = {};
+
void probe_superio(void)
{
superio = probe_superio_ite();
@@ -111,8 +113,9 @@
superio = probe_superio_winbond();
#endif
}
+#endif
-int is_laptop;
+int is_laptop = 0;
int internal_init(void)
{
@@ -149,10 +152,13 @@
* mainboard specific flash enable sequence.
*/
coreboot_init();
+
+#if defined(__i386__) || defined(__x86_64__)
dmi_init();
/* Probe for the Super I/O chip and fill global struct superio. */
probe_superio();
+#endif
/* Warn if a laptop is detected. */
if (is_laptop)
@@ -173,8 +179,10 @@
"will most likely fail.\n");
}
+#if defined(__i386__) || defined(__x86_64__)
/* Probe for IT87* LPC->SPI translation unconditionally. */
it87xx_probe_spi_flash(NULL);
+#endif
board_flash_enable(lb_vendor, lb_part);
Index: flashrom-ioport_x86_only/board_enable.c
===================================================================
--- flashrom-ioport_x86_only/board_enable.c (Revision 984)
+++ flashrom-ioport_x86_only/board_enable.c (Arbeitskopie)
@@ -28,6 +28,7 @@
#include <fcntl.h>
#include "flash.h"
+#if defined(__i386__) || defined(__x86_64__)
/*
* Helper functions for many Winbond Super I/Os of the W836xx range.
*/
@@ -1299,6 +1300,8 @@
return it8712f_gpio_set(32, 1);
}
+#endif
+
/**
* Below is the list of boards which need a special "board enable" code in
* flashrom before their ROM chip can be accessed/written to.
@@ -1342,6 +1345,7 @@
struct board_pciid_enable board_pciid_enables[] = {
/* first pci-id set [4], second pci-id set [4], dmi identifier coreboot id [2], vendor name board name max_rom_... OK? flash enable */
+#if defined(__i386__) || defined(__x86_64__)
{0x10DE, 0x0547, 0x147B, 0x1C2F, 0x10DE, 0x0548, 0x147B, 0x1C2F, NULL, NULL, NULL, "Abit", "AN-M2", 0, NT, nvidia_mcp_gpio2_raise},
{0x8086, 0x2926, 0x147b, 0x1084, 0x11ab, 0x4364, 0x147b, 0x1084, NULL, NULL, NULL, "Abit", "IP35", 0, OK, intel_ich_gpio16_raise},
{0x8086, 0x2930, 0x147b, 0x1083, 0x10ec, 0x8167, 0x147b, 0x1083, NULL, NULL, NULL, "Abit", "IP35 Pro", 0, OK, intel_ich_gpio16_raise},
@@ -1407,7 +1411,7 @@
{0x1106, 0x3123, 0x1106, 0x3123, 0x1106, 0x3059, 0x1106, 0x4161, NULL, NULL, NULL, "Termtek", "TK-3370 (Rev:2.5B)", 0, OK, w836xx_memw_enable_4e},
{0x1106, 0x3177, 0x1106, 0xAA01, 0x1106, 0x3123, 0x1106, 0xAA01, NULL, NULL, NULL, "VIA", "EPIA M/MII/...", 0, OK, via_vt823x_gpio15_raise},
{0x1106, 0x0259, 0x1106, 0x3227, 0x1106, 0x3065, 0x1106, 0x3149, NULL, NULL, NULL, "VIA", "EPIA-N/NL", 0, OK, via_vt823x_gpio9_raise},
-
+#endif
{ 0, 0, 0, 0, 0, 0, 0, 0, NULL, NULL, NULL, NULL, NULL, 0, NT, NULL}, /* end marker */
};
--
http://www.hailfinger.org/
More information about the flashrom
mailing list