[flashrom] [PATCH] ICH9/10: display FRAP/FREGx access controls
Carl-Daniel Hailfinger
c-d.hailfinger.devel.2006 at gmx.net
Thu Jul 1 18:35:28 CEST 2010
Hi,
your patch looks good, but I have some cosmetic nitpicks.
On 29.06.2010 18:29, Joshua Roys wrote:
> diff --git a/chipset_enable.c b/chipset_enable.c
> index d124291..ce80a58 100644
> --- a/chipset_enable.c
> +++ b/chipset_enable.c
> @@ -430,6 +430,44 @@ static int enable_flash_vt8237s_spi(struct pci_dev *dev, const char *name)
> return 0;
> }
>
> +#define ICH_BMWAG(x) ((x >> 24) & 0xff)
> +#define ICH_BMRAG(x) ((x >> 16) & 0xff)
> +#define ICH_BRWA(x) ((x >> 8) & 0xff)
> +#define ICH_BRRA(x) ((x >> 0) & 0xff)
> +
> +#define ICH_FREG_BASE(x) ((x >> 0) & 0x1fff)
> +#define ICH_FREG_LIMIT(x) ((x >> 16) & 0x1fff)
> +
> +static void do_ich9_spi_frap(uint32_t frap, int i)
> +{
> + const char *access_names[4] = {
> + "locked", "read-only", "write-only", "read-write"
> + };
> + const char *region_names[5] = {
> + "Flash Descriptor", "BIOS Descriptor",
>
"BIOS", not "BIOS Descriptor"
> + "ME", "GbE", "Platform Data"
>
Not sure if "Management Engine" and "Gigabit Ethernet" would be better.
> + };
> + int rwperms = ((ICH_BRWA(frap) & (1 << i)) << 1) |
> + ((ICH_BRRA(frap) & (1 << i)) << 0);
> + int offset = 0x54 + i * 4;
> + uint32_t freg = mmio_readl(spibar + offset), base, limit;
> +
> + msg_pdbg("0x%02X: 0x%08x (FREG%i: %s)\n",
> + offset, freg, i, region_names[i]);
> +
> + base = ICH_FREG_BASE(freg);
> + limit = ICH_FREG_LIMIT(freg);
> + if (base == 0x1fff && limit == 0) {
> + /* this FREG is disabled */
> + msg_pdbg("%s region is unused.\n", region_names[i]);
>
"... unused or has no access restrictions.\n" would be better. I don't
believe your machine has no BIOS region.
> + return;
> + }
> +
> + msg_pdbg("0x%08x-0x%08x is %s\n",
> + (base << 12), (limit << 12) | 0x0fff,
> + access_names[rwperms]);
> +}
> +
> static int enable_flash_ich_dc_spi(struct pci_dev *dev, const char *name,
> int ich_generation)
> {
> @@ -554,21 +592,15 @@ static int enable_flash_ich_dc_spi(struct pci_dev *dev, const char *name,
>
> tmp = mmio_readl(spibar + 0x50);
> msg_pdbg("0x50: 0x%08x (FRAP)\n", tmp);
> - msg_pdbg("BMWAG %i, ", (tmp >> 24) & 0xff);
> - msg_pdbg("BMRAG %i, ", (tmp >> 16) & 0xff);
> - msg_pdbg("BRWA %i, ", (tmp >> 8) & 0xff);
> - msg_pdbg("BRRA %i\n", (tmp >> 0) & 0xff);
> -
> - msg_pdbg("0x54: 0x%08x (FREG0)\n",
> - mmio_readl(spibar + 0x54));
> - msg_pdbg("0x58: 0x%08x (FREG1)\n",
> - mmio_readl(spibar + 0x58));
> - msg_pdbg("0x5C: 0x%08x (FREG2)\n",
> - mmio_readl(spibar + 0x5C));
> - msg_pdbg("0x60: 0x%08x (FREG3)\n",
> - mmio_readl(spibar + 0x60));
> - msg_pdbg("0x64: 0x%08x (FREG4)\n",
> - mmio_readl(spibar + 0x64));
> + msg_pdbg("BMWAG 0x%02x, ", ICH_BMWAG(tmp));
> + msg_pdbg("BMRAG 0x%02x, ", ICH_BMRAG(tmp));
> + msg_pdbg("BRWA 0x%02x, ", ICH_BRWA(tmp));
> + msg_pdbg("BRRA 0x%02x\n", ICH_BRRA(tmp));
> +
> + /* print out the FREGx registers along with FRAP access bits */
> + for(i = 0; i < 5; i++)
> + do_ich9_spi_frap(tmp, i);
> +
> msg_pdbg("0x74: 0x%08x (PR0)\n",
> mmio_readl(spibar + 0x74));
> msg_pdbg("0x78: 0x%08x (PR1)\n",
>
Rest is fine, and will be acked and committed by me.
Regards,
Carl-Daniel
--
http://www.hailfinger.org/
More information about the flashrom
mailing list