[flashrom] [commit] r887 - trunk

Luc Verhaegen libv at skynet.be
Thu Feb 4 03:32:34 CET 2010


On Mon, Feb 01, 2010 at 02:53:30AM +0100, Luc Verhaegen wrote:
> On Sun, Jan 31, 2010 at 10:27:35PM +0100, Luc Verhaegen wrote:
> > On Sun, Jan 31, 2010 at 09:13:07PM +0100, repository service wrote:
> > > Author: uwe
> > > Date: Sun Jan 31 21:13:06 2010
> > > New Revision: 887
> > > URL: http://flashrom.org/trac/coreboot/changeset/887
> > > 
> > > Log:
> > > Add the Tekram P6Pro-A5 board as supported (trivial).
> > > 
> > > The board doesn't need a board-enable, writing works out of the box.
> > > 
> > > Also, the board can only decode 256KB. I verified this by writing a 512KB
> > > image of random bytes (which fails), whereas 256KB of random bytes can be
> > > written correctly.
> > > 
> > > Signed-off-by: Uwe Hermann <uwe at hermann-uwe.de>
> > > Acked-by: Uwe Hermann <uwe at hermann-uwe.de>
> > > 
> > > Modified:
> > >    trunk/board_enable.c
> > >    trunk/print_wiki.c
> > > 
> > > Modified: trunk/board_enable.c
> > > ==============================================================================
> > > --- trunk/board_enable.c	Fri Jan 29 00:55:12 2010	(r886)
> > > +++ trunk/board_enable.c	Sun Jan 31 21:13:06 2010	(r887)
> > > @@ -1235,6 +1235,7 @@
> > >  	{0x10DE, 0x0050, 0x1297, 0x5036,  0x1412, 0x1724, 0x1297, 0x5036, NULL,          NULL,         NULL,          "Shuttle",     "FN25",                  0,   board_shuttle_fn25},
> > >  	{0x1106, 0x3038, 0x0925, 0x1234,  0x1106, 0x3058, 0x15DD, 0x7609, NULL,          NULL,         NULL,          "Soyo",        "SY-7VCA",               0,   board_soyo_sy_7vca},
> > >  	{0x8086, 0x1076, 0x8086, 0x1176,  0x1106, 0x3059, 0x10f1, 0x2498, NULL,          NULL,         NULL,          "Tyan",        "S2498 (Tomcat K7M)",    0,   w836xx_memw_enable_2e},
> > > +	{0x1106, 0x3038, 0x0925, 0x1234,       0,      0,      0,      0, NULL,          NULL,         NULL,          "Tekram",      "P6Pro-A5",              256, NULL},
> > >  	{0x1106, 0x3177, 0x1106, 0xAA01,  0x1106, 0x3123, 0x1106, 0xAA01, NULL,          NULL,         NULL,          "VIA",         "EPIA M/MII/...",        0,   via_vt823x_gpio15_raise},
> > >  	{0x1106, 0x0259, 0x1106, 0x3227,  0x1106, 0x3065, 0x1106, 0x3149, NULL,          NULL,         NULL,          "VIA",         "EPIA-N/NL",             0,   via_vt823x_gpio9_raise},
> > >  	{0x1106, 0x5337, 0x1458, 0xb003,  0x1106, 0x287e, 0x1106, 0x337e, NULL,          NULL,         NULL,          "VIA",         "PC3500G",               0,   it87xx_probe_spi_flash},
> > 
> > Second set of ids.
> > 
> > Luc Verhaegen.
> 
> Also, where are the lspci -vvnnxxx; flashrom -V and superio -deV outputs 
> that we require for board enables? I seem unable to find them on the 
> list.
> 
> Luc Verhaegen.

This is fair warning from the board enable gestapo.

There are issues with this code:
* no second set of IDs.
* no lspci dump.
* no superiotool dump.
* no flashrom -V output for dmi strings.

This pretty much breaches all existing board enable conventions. This is 
exacerbated by the self-ack.

It is code from sunday, the issues here were flagged shortly after, but 
are still not rectified. I therefor propose a direct revert of the board 
enable line.

Luc Verhaegen.




More information about the flashrom mailing list