[flashrom] [commit] r887 - trunk

[Luc Verhaegen]

On Sun, Jan 31, 2010 at 10:27:35PM +0100, Luc Verhaegen wrote:
> On Sun, Jan 31, 2010 at 09:13:07PM +0100, repository service wrote:
> > Author: uwe
> > Date: Sun Jan 31 21:13:06 2010
> > New Revision: 887
> > URL: http://flashrom.org/trac/coreboot/changeset/887
> > 
> > Log:
> > Add the Tekram P6Pro-A5 board as supported (trivial).
> > 
> > The board doesn't need a board-enable, writing works out of the box.
> > 
> > Also, the board can only decode 256KB. I verified this by writing a 512KB
> > image of random bytes (which fails), whereas 256KB of random bytes can be
> > written correctly.
> > 
> > Signed-off-by: Uwe Hermann <uwe at hermann-uwe.de>
> > Acked-by: Uwe Hermann <uwe at hermann-uwe.de>
> > 
> > Modified:
> >    trunk/board_enable.c
> >    trunk/print_wiki.c
> > 
> > Modified: trunk/board_enable.c
> > ==============================================================================
> > --- trunk/board_enable.c	Fri Jan 29 00:55:12 2010	(r886)
> > +++ trunk/board_enable.c	Sun Jan 31 21:13:06 2010	(r887)
> > @@ -1235,6 +1235,7 @@
> >  	{0x10DE, 0x0050, 0x1297, 0x5036,  0x1412, 0x1724, 0x1297, 0x5036, NULL,          NULL,         NULL,          "Shuttle",     "FN25",                  0,   board_shuttle_fn25},
> >  	{0x1106, 0x3038, 0x0925, 0x1234,  0x1106, 0x3058, 0x15DD, 0x7609, NULL,          NULL,         NULL,          "Soyo",        "SY-7VCA",               0,   board_soyo_sy_7vca},
> >  	{0x8086, 0x1076, 0x8086, 0x1176,  0x1106, 0x3059, 0x10f1, 0x2498, NULL,          NULL,         NULL,          "Tyan",        "S2498 (Tomcat K7M)",    0,   w836xx_memw_enable_2e},
> > +	{0x1106, 0x3038, 0x0925, 0x1234,       0,      0,      0,      0, NULL,          NULL,         NULL,          "Tekram",      "P6Pro-A5",              256, NULL},
> >  	{0x1106, 0x3177, 0x1106, 0xAA01,  0x1106, 0x3123, 0x1106, 0xAA01, NULL,          NULL,         NULL,          "VIA",         "EPIA M/MII/...",        0,   via_vt823x_gpio15_raise},
> >  	{0x1106, 0x0259, 0x1106, 0x3227,  0x1106, 0x3065, 0x1106, 0x3149, NULL,          NULL,         NULL,          "VIA",         "EPIA-N/NL",             0,   via_vt823x_gpio9_raise},
> >  	{0x1106, 0x5337, 0x1458, 0xb003,  0x1106, 0x287e, 0x1106, 0x337e, NULL,          NULL,         NULL,          "VIA",         "PC3500G",               0,   it87xx_probe_spi_flash},
> 
> Second set of ids.
> 
> Luc Verhaegen.

Also, where are the lspci -vvnnxxx; flashrom -V and superio -deV outputs 
that we require for board enables? I seem unable to find them on the 
list.

Luc Verhaegen.