[flashrom] regression report 0.9.1: Winbond W39V080FA fails

[Stefan Reinauer]

On 2/4/10 12:27 AM, Michael Karcher wrote:
> Am Donnerstag, den 04.02.2010, 00:12 +0100 schrieb Stefan Reinauer:
>   
>> Here's a failure log for a starter
>>     
> Problem is obvious. In svn r868, where the Winbond chips were changed to
> standard JEDEC procedures the unlocking code (call to
> unlock_winbond_fwhub in erase_winbond_fwhub) got lost. This applies to
> w39v080fa in standard mode and in dual partition mode. As the chip is no
> longer unlocked, erase doesn't work. Write would fail, too.
>
> Regards,
>   Michael Karcher
>
>
>   
I can verify that this is the case.

The attached hack fixes erase for me.

-- 
coresystems GmbH • Brahmsstr. 16 • D-79104 Freiburg i. Br.
      Tel.: +49 761 7668825 • Fax: +49 761 7664613
Email: info at coresystems.de  • http://www.coresystems.de/
Registergericht: Amtsgericht Freiburg • HRB 7656
Geschäftsführer: Stefan Reinauer • Ust-IdNr.: DE245674866

-------------- next part --------------
An embedded and charset-unspecified text was scrubbed...
Name: unlock-hack.diff
URL: <http://www.flashrom.org/pipermail/flashrom/attachments/20100204/d8d812d7/attachment.ksh>