[flashrom] regression report 0.9.1: Winbond W39V080FA fails

[Michael Karcher]

Am Donnerstag, den 04.02.2010, 00:12 +0100 schrieb Stefan Reinauer:
> Here's a failure log for a starter
Problem is obvious. In svn r868, where the Winbond chips were changed to
standard JEDEC procedures the unlocking code (call to
unlock_winbond_fwhub in erase_winbond_fwhub) got lost. This applies to
w39v080fa in standard mode and in dual partition mode. As the chip is no
longer unlocked, erase doesn't work. Write would fail, too.

Regards,
  Michael Karcher