[flashrom] [Fwd: Re: Is K7S6A supported by flashrom? 2nd Reply.]

[Carl-Daniel Hailfinger]

forwarded.

-------- Original Message --------
Subject: 	Re: [flashrom] Is K7S6A supported by flashrom? 2nd Reply.
Date: 	Wed, 14 Oct 2009 19:33:44 +0100
From: 	spirals <spirals at eircom.net>
To: 	Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006 at gmx.net>
References: 	<4AD4DABF.8050509 at eircom.net> <4AD4EF17.80507 at gmx.net>



Hi Carl-Daniel, Have just restarted after a full covers off eye-ball of 
the board is definatly is the K&S6A (v1.0) board, pene also looked (my 
eyes are not as good as they were) and she confirmed 1.0 and _/*not 
1.0A*/_ regards, (dja.)

Carl-Daniel Hailfinger wrote:
> Hi Dave,
>
> On 13.10.2009 21:53, David J Aldridge wrote:
>   
>> Ran flashrom and it reports "No EEPROM/flash device found", same with 
>> -m ecs:k7s5a.
>>     
>
> Please send the output of "flashrom -V", "lspci -nnvvvxxx", "superiotool
> -dV" and if tell us if your board is
> K7S6A (V1.0)
> or
> K7S6A (V1.0A)
>
> Luc: BIOS downloads are here (not sure which PCB is the one Dave has):
> http://www.ecs.com.tw/ECSWebSite/Products/ProductsDetail.aspx?detailid=77&CategoryID=1&DetailName=Bios&MenuID=52&LanID=0
> http://www.ecs.com.tw/ECSWebSite/Products/ProductsDetail.aspx?detailid=238&CategoryID=1&DetailName=Bios&MenuID=52&LanID=0
>
> Regards,
> Carl-Daniel
>
>   



-- 
Developer quote of the week: 
"We are juggling too many chainsaws and flaming arrows and tigers."