[flashrom] Flashrom does not work with J7F5M

[Luc Verhaegen]

After looking at the picture of the jetway website, and i noticed the 
layout of the board with the philips tv decoder on it, my coin dropped 
that i actually own this board.

Still stumped as to how to write to it, the board enable in the latest 
jetway bios fails.

Does the dos utility work for you?

Output of flashrom failing:

./flashrom -E
flashrom v0.9.0-runknown
No coreboot table found.
Found chipset "VIA CX700", enabling flash write... OK.
This chipset supports the following protocols: Non-SPI.
Calibrating delay loop... OK.
Found chip "Winbond W39V040B" (512 KB, LPC) at physical address 
0xfff80000.
Erasing flash chip... ERASE FAILED at 0x00000000! Expected=0xff, 
Read=0x49
ERASE FAILED!
FAILED!
ERROR at 0x00000000: Expected=0xff, Read=0x49

No change no matter what i do.

Luc Verhaegen.