[coreboot] Porting coreboot to new board

Zvi Vered veredz72 at gmail.com
Thu May 31 04:39:51 CEST 2018


Hi All,

The links you provided:
https://www.coreboot.org/Motherboard_Porting_Guide
https://www.coreboot.org/Developer_Manual

Does not mention Intel's FSP at all.

How FSP is integrated during coreboot porting ?
src\venorcode\intel contains 2 FSP versions.
src\soc\intel  contains fsp_baytrail, fsp_broadwell_de

Thank you,
Zvika

On Thu, May 31, 2018 at 2:07 AM Youness Alaoui <
kakaroto at kakaroto.homelinux.net> wrote:

> This is the best I can do for you :
>
>
> https://ark.intel.com/products/89608/Intel-Xeon-Processor-E3-1505M-v5-8M-Cache-2_80-GHz
>
> Product Collection: Intel® Xeon® Processor E3 v5 Family
> Code Name: Products formerly Skylake
>
> kakaroto at kakaroto:~/coding/purism/coreboot$ git grep SOC_INTEL_SKYLAKE
> | grep mainboard
> src/mainboard/google/chell/Kconfig: select SOC_INTEL_SKYLAKE
> src/mainboard/google/glados/Kconfig: select SOC_INTEL_SKYLAKE
> src/mainboard/google/lars/Kconfig: select SOC_INTEL_SKYLAKE
> src/mainboard/intel/kblrvp/Kconfig: select SOC_INTEL_SKYLAKE
> src/mainboard/intel/kunimitsu/Kconfig: select SOC_INTEL_SKYLAKE
> src/mainboard/intel/saddlebrook/Kconfig: select SOC_INTEL_SKYLAKE
> src/mainboard/purism/librem_skl/Kconfig: select SOC_INTEL_SKYLAKE
>
> I'm going to assume that the skylake Xeon is supported and will work
> (from a coreboot standpoint) just the same as a Core i5 or whatever,
> but it might not be the case. That will be your job to figure the rest
> out.
>
> Good luck,
> Youness.
>
>
> On Wed, May 30, 2018 at 3:35 PM, Zvi Vered <veredz72 at gmail.com> wrote:
> > Hello Youness,
> >
> > Thank you very much for the detailed information !
> >
> > Can you please tell what is the best starting point for a XEON board ?
> > I think there are no "Intel® XEON® Processor E3-1505M v5" boards in last
> > version of coreboot.
> > Am I right ?
> >
> > Best regards,
> > Zvika
> >
> > On Tue, May 29, 2018 at 9:15 PM Youness Alaoui
> > <kakaroto at kakaroto.homelinux.net> wrote:
> >>
> >> Hi,
> >>
> >> I suggest you read the wiki :
> >> https://www.coreboot.org/Developer_Manual and
> >> https://www.coreboot.org/Motherboard_Porting_Guide
> >> I would also suggest maybe (optional) that you read my blog posts
> >> about my own experience porting coreboot to a new motherboard :
> >> https://puri.sm/posts/diving-back-into-coreboot-development/
> >> https://puri.sm/posts/librem-13-coreboot-report-january-12-2017/
> >> https://puri.sm/posts/librem-13-coreboot-report-february-3rd-2017/
> >> https://puri.sm/posts/librem-13-coreboot-report-february-25th-2017/
> >> https://puri.sm/posts/coreboot-on-the-librem-13-v2-part-1/
> >> https://puri.sm/posts/coreboot-on-the-skylake-librems-part-2/
> >>
> >> To answer your specific questions : It depends on your machine, is it
> >> AMD or is it Intel? Is it Ivybridge or Broadwell or Skylake or
> >> Apollolake, etc.. ? Does it have soldered RAM or does it use SODIMMs?
> >> Depending on the CPU architecture, the CPU 'brand' and even the model
> >> of the CPU itself, the port will be done very differently. You'd first
> >> want to find a mainboard that is as close as your current one, and
> >> start modifying that, there isn't "one mainboard to use as base"
> >> because the code, files, etc.. are almost unique depending on the
> >> CPU/northbridge/southbridge model, so use the closest one as your
> >> base.
> >> As far as I know, the file board_info.txt is just information about
> >> the board, it's not getting used by coreboot, it's more of an
> >> indication for developers.
> >> As for the other files, it will depend once again on your board. I'd
> >> say Kconfig and devicetree.cb are mandatory, the rest may or may not
> >> be mandatory depending on your hardware. The cmos.layout for example
> >> isn't mandatory, but you'd probably need it if you enable CMOS support
> >> in your KConfig, The 'spd' files containing the RAM's SPD EEPROM
> >> information are mandatory only if your board has soldered RAM (common
> >> in laptops but not in desktops), but they are not needed (and actually
> >> can't be provided) if the motherboard has SODIMM slots instead. So it
> >> all depends. Your best bet is to look at what's there and see if you
> >> need it or not and if you do, understand what it's for and what needs
> >> to be changed in order to match your board.
> >> Don't forget that before you get your board to boot with coreboot, you
> >> will probably have to flash it and brick your board 100 times, so make
> >> sure you have a backup of your original ROM copied somewhere safe and
> >> that you have the hardware to re-program the SPI flash externally (and
> >> test that it works), before you attempt to flash it.
> >> Also, make sure you are patient, and ready to learn!
> >>
> >> Good luck!
> >> Youness.
> >>
> >>
> >> On Mon, May 28, 2018 at 10:31 PM, Zvi Vered <veredz72 at gmail.com> wrote:
> >> > Hello,
> >> >
> >> > I have to port coreboot to a new "Mainboard" not listed in menuconfig.
> >> > Is there a basic "Mainboard" I should use as a starting point that
> will
> >> > be
> >> > copied to my board ?
> >> >
> >> > The file board_info.txt contains few parameters.
> >> > How can I know the meaning of each parameter and its possible values ?
> >> >
> >> > The board kontron/kt690 for example contains few files like:
> >> > cmos.layout,
> >> > devicetree.cb, etc
> >> > Are all those files mandatory ?
> >> > Is there a list of mandatory files or routines required in order to
> port
> >> > a
> >> > board ?
> >> >
> >> > Your help is highly appreciated.
> >> > Best regards,
> >> > Zvika
> >> >
> >> > --
> >> > coreboot mailing list: coreboot at coreboot.org
> >> > https://mail.coreboot.org/mailman/listinfo/coreboot
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mail.coreboot.org/pipermail/coreboot/attachments/20180531/7d7e74c0/attachment.html>


More information about the coreboot mailing list