[coreboot] BDX-DE PCI init fail

[Zoran Stojsavljevic]

> grub>

Yup, you have reached the GRUB2 shell. I have no idea what the
underlying system is yuo have done this? UEFI or Legacy?

If UEFI, this USB will NOT work for Coreboot + SeaBIOS. If Legacy,
then I have no idea why it does not work (it should)!?

If UEFI, then you might reconsider https://rufus.akeo.ie/ (5 minutes
job to create Legacy bootable USB):
[1] Partition scheme MBR used on BIOS;
[2] File System probably FAT32 (should work).

Good Luck!
Zoran
_______

On Wed, Jan 10, 2018 at 2:49 AM, Hilbert Tu(杜睿哲_Pegatron)
<Hilbert_Tu at pegatroncorp.com> wrote:
> Hi Zoran,
>
> I have my USB stick formatted with ext4fs and I am pretty sure the image inside is bootable.
> What I mean to get a prompt shell is like following so that I can specify my commands.
>
> grub> linux (usb0,1)/bzImage console=ttyS1,115200 console=tty1 root=/dev/ra
> m ramdisk_size=102400
> grub> initrd (usb0,1)/core-image-minimal-initramfs-mohonpeak64.cpio.gz
> grub> boot
>
> But right now it just hangs there and I am looking into GIPO settings or maybe I have some wrong settings in ACPI table:(
>
> -Hilbert
>
> This e-mail and its attachment may contain information that is confidential or privileged, and are solely for the use of the individual to whom this e-mail is addressed. If you are not the intended recipient or have received it accidentally, please immediately notify the sender by reply e-mail and destroy all copies of this email and its attachment. Please be advised that any unauthorized use, disclosure, distribution or copying of this email or its attachment is strictly prohibited.
> 本電子郵件及其附件可能含有機密或依法受特殊管制之資訊，僅供本電子郵件之受文者使用。台端如非本電子郵件之受文者或誤收本電子郵件，請立即回覆郵件通知寄件人，並銷毀本電子郵件之所有複本及附件。任何未經授權而使用、揭露、散佈或複製本電子郵件或其附件之行為，皆嚴格禁止。