[coreboot] I want to be a contributor (Cloud Dai)

[Elisenda Cuadros]

You explained it so well, thank you!


On 20/02/18 20:29, Timothy Pearson wrote:
> -----BEGIN PGP SIGNED MESSAGE-----
> Hash: SHA1
>
> There's a modest single digit performance boost at isoclock, but the
> 63xx series also has the fastest core you will see in the
> owner-controlled x86 world (3.8GHz).  The 62xx tops out at 3.6GHz.
>
> Both are 32nm and completely obsolete by modern standards.  The POWER9
> chip for instance will run circles around either one of these, so I'd
> say rather than looking for maximum absolute performance at high cost,
> go for the 62xx series.  It'll still last you a long time for moderate
> computing needs.
>
> On 02/20/2018 01:12 PM, Elisenda Cuadros wrote:
>> Hello,
>>
>> Is it really worth 63xx series instead 62xx?
>>
>> They are _much more_ expensive.
>>
>> Is there any public benchmark?
>>
>> Regards,
>>
>> - Eli
>>
>>
>> On 20/02/18 10:46, Taiidan at gmx.com wrote:
>>> On 02/20/2018 01:29 AM, 戴，曉政 via coreboot wrote:
>>>
>>>> Dear Taiidan,
>>>>
>>>> I have get KGPE-D16 motherboard from auction website but I find that
>>>> AMD 6328 CPU is too expensive ($499 USD).  As well as 6386SE CPU is
>>>> more expensive than 6328 CPU so please give me a favor. Please list
>>>> some cheaper AMD CPUs name that can be built successfully  when I use
>>>> KGPE-D16 motherboard to install coreboot.
>>> Right now on ebay I also see a 6328 for $130 and a 6386SE for
>>> $225/best offer (the last and best owner controlled x86-64 CPU, get
>>> one while you can IMO).
>>> https://www.ebay.com/itm/AMD-Opteron-OS6386YETGGHK-16-Core-2-8GHz-16MB-6-4GT-s-Server-CPU/222837140766
>>>
>>> This one is in good condition (note the straight as an arrow
>>> capacitors on the bottom with none missing)
>>>
>>> FYI don't buy a CPU that has missing bottom capacitors or scratches on
>>> the pads, always ask a seller for a photo of the bottom if you buy a
>>> G34 CPU like the 6386SE.
>>>>    I know my English is very poor,
>>> Naah it is fine :]
>>>
>>
>
> - -- 
> Timothy Pearson
> Raptor Engineering
> +1 (415) 727-8645 (direct line)
> +1 (512) 690-0200 (switchboard)
> https://www.raptorengineering.com
> -----BEGIN PGP SIGNATURE-----
> Version: GnuPG v1
>
> iQEcBAEBAgAGBQJajHcfAAoJEK+E3vEXDOFbMT4H/R1h21/aNp54aXirjAo1t/pt
> iR7XBRB6IvMTC6J59okRuXRkhg8Vv82NKTrTZ6yEP9VXXEG710/rzZYEF6dlggdI
> v0WObUmhmziCOrdztiXh7lwq51G1O2pPpAPlVZ2tCCjEV2t7ebEHZq8IxoMzBNhD
> oRDQlr+Ohv49XtjWVxuTsTyRCxEQU69cJ+ZFeQOQAFK6agP9YlMnEIXOssWikThU
> nP2e8+0wV2ts4hCLQ17ubaDoVsPg4Rc99hO7CtQLziq7bN0Q4hJ2o9+INuzKsHxf
> mWwCx9QUfFGILBFqMiY/fJZeKyX9I4OyEYJagIbkTyOaZ6SdT2/RYl6znL4eBME=
> =OUXz
> -----END PGP SIGNATURE-----