[coreboot] Coreboot 4.5: No early serial output

Naveed Ghori naveed.ghori at dti.com.au
Wed Mar 29 10:55:22 CEST 2017


Hi all,

In Coreboot 4.4 (Intel baytrail FSP) early serial output use to work (first line being coreboot version followed by RTC Init)
In Coreboot 4.5 it seems that serial output only works once the FSP initializes the serial port (first line being romstage_main_continue).

Notes: Setup for spew output, using the debug serial port lines.
I am looking at what might have caused this but though I'd ask if this was a known issue, possibly already fixed with a patch or if it was an error on my part.

Note sure exactly where to search as I have already reviewed the changes in src/drivers/uart/uart8250io.c

Regards,
Naveed
Naveed Ghori | Lead Firmware & Driver Engineer
DTI Group Ltd | Transit Security & Surveillance
31 Affleck Road, Perth Airport, Western Australia 6105, Australia
P +61 8 9373 2905,151 | F +61 8 9479 1190 | naveed.ghori at dti.com.au<mailto:naveed.ghori at dti.com.au>

Visit our website  www.dti.com.au<http://www.dti.com.au>
The information contained in this email is confidential. If you receive this email in error, please inform DTI Group Ltd via the above contact details. If you are not the intended recipient, you may not use or disclose the information contained in this email or attachments.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.coreboot.org/pipermail/coreboot/attachments/20170329/4dfc4f18/attachment.html>


More information about the coreboot mailing list