[coreboot] Maintain boot order for multiple EFI based OS

[Martin Roth]

As I recall, the rangeley FSP actually *REQUIRES* the mrc cache.  Not
having it would be a definite problem.

Did you select "Use MRC Cache in FMAP"?  If you did, that puts it
outside of cbfs, so it wouldn't show up in that list.

Are you working from upstream coreboot, or a tree from somewhere else?

Martin

On Fri, Mar 24, 2017 at 7:00 AM,  <Sibi.Rajasekaran at dell.com> wrote:
> Dell - Internal Use - Confidential
>
> Hi Matt,
>
> Thanks for the prompt response.
>
> I am using Rangeley FSP in my coreboot environment and I don’t see mrc cache
> in the coreboot region even though I chose to use MRC Cache in the config.
>
> Performing operation on 'COREBOOT' region...
>
> Name                           Offset     Type         Size
>
> cbfs master header             0x0        cbfs header  32
>
> fallback/romstage              0x80       stage        27612
>
> cpu_microcode_blob.bin         0x6cc0     microcode    167936
>
> fallback/ramstage              0x2fd40    stage        121204
>
> config                         0x4d700    raw          539
>
> revision                       0x4d980    raw          588
>
> cmos_layout.bin                0x4dc40    cmos_layout  1320
>
> fallback/dsdt.aml              0x4e1c0    raw          8074
>
> fallback/payload               0x501c0    payload      648600
>
> img/memtest                    0xee7c0    payload      180268
>
> (empty)                        0x11a840   null         415320
>
> fsp.bin                        0x17fec0   fsp          389120
>
> (empty)                        0x1def00   null         132504
>
> bootblock                      0x1ff4c0   bootblock    2560
>
>
>
> I had built the tianocore long before(may be 6 months back) and I am pretty
> sure I chose release payload.
>
>
>
> Thanks,
>
> Sibi
>
> From: Matt DeVillier [mailto:matt.devillier at gmail.com]
> Sent: Friday, March 24, 2017 2:23 PM
> To: Rajasekaran, Sibi <Sibi_Rajasekaran at Dell.com>
> Cc: Zoran Stojsavljevic <zoran.stojsavljevic at gmail.com>; coreboot
> <coreboot at coreboot.org>
> Subject: Re: [coreboot] Maintain boot order for multiple EFI based OS
>
>
>
>
>
>
>
> On Fri, Mar 24, 2017 at 6:26 PM, <Sibi.Rajasekaran at dell.com> wrote:
>
>
>
> For your question, takes around 26 seconds from power On till Tianocore
> execute completion. Looking at reducing this boot time.
>
>
>
>
>
> Sibi, if you're not using mrc cache for RAM training, that's likely
> contributing 10s or so at least.  Have you enabled coreboot timestamps and
> used cbmem to examine time to payload execute?  Also, building Tianocore in
> debug (vs release) mode adds a bit of time as well due to the volume of
> serial output.  I use coreboot + Tianocore on Baytrail N28xx/29xx (though
> not with FSP) and normal boot (after RAM training) with a release payload is
> on the order of 2s, with coreboot taking about 6-700ms of that.
>
>
> --
> coreboot mailing list: coreboot at coreboot.org
> https://www.coreboot.org/mailman/listinfo/coreboot