[coreboot] SMI handler for fsp_broadwell_de

[Watzlavick, Robert L]

Thank you very much for the reply.  I think you mean though that the FSP does NOT need to be touched - correct?

-Bob
________________________________
From: Yang, York [york.yang at intel.com]
Sent: Thursday, September 22, 2016 8:34 PM
To: Watzlavick, Robert L (US); coreboot at coreboot.org
Subject: EXTERNAL: Re: SMI handler for fsp_broadwell_de

Fsp_broadwell_de do not implement the SMI support, but you may refer to soc/Broadwell as both are Intel architecture chipset.  The SMI support can be done purely in coreboot, but need to touch FSP.

/ YoRK

From: coreboot [mailto:coreboot-bounces at coreboot.org] On Behalf Of Watzlavick, Robert L
Sent: Thursday, September 22, 2016 4:28 PM
To: coreboot at coreboot.org
Subject: [coreboot] SMI handler for fsp_broadwell_de

I want to experiment with an SMI handler on the Camelback Mountain CRB (Xeon D-1500) but it appears that the fsp_broadwell_de changes removed SMM support.  I’m browsing the coreboot-4.4 release.  Was there a reason it was removed?  It shows up in the soc/intel/Broadwell area so I suppose I could port over the original code.  I didn’t see that the D_LCK bit was set anywhere so does that mean I can potentially let SeaBIOS install an SMI handler?  Or is it set in the FSP?  I also noticed the mainline has some new code under coreboot/src/soc/intel/sch but I’m not sure which processors that is for.

Thanks,
-Bob