[coreboot] Anyone have a experence the u-boot on coreboot?(Rangeley platform)

[김유석]

Dear Sir.

My ENV is see below.

CPU : Rangeley C2358(Based on ADI board)


Curently, I'm try to use the u-boot(2016.05) but have a "boot fail".

log is see below.


   U-Boot 2016.05-rc3 (Nov 23 2016 - 16:42:44 +0900)

   CPU: x86_64, vendor Intel, device 406d8h
   DRAM:  4 GiB
   dm_pci_hose_probe_bus: Internal error, bus 'pch at 1,0' got seq 0, 
expected 1
   Using default environment

   Model: QEMU x86 (I440FX)
   dm_pci_hose_probe_bus: Internal error, bus 'pch at 1,0' got seq 0, 
expected 1
   initcall sequence 7fc5a340 failed at call 01110185 (err=-32)
   ### ERROR ### Please RESET the board ###


I was use the "qemu-x86_i440fx.dts" It is a default dts of u-boot.


Boot failure is caused by "wrong DTS", I guess.


And.


A few month ago, I was success booted use the u-boot.

But, I was lost the source code and memories..


Please advise to me.


Thank you.



-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.coreboot.org/pipermail/coreboot/attachments/20161123/c1b4fe3d/attachment.html>