[coreboot] How to change the Core input voltage setting?

[Zoran Stojsavljevic]

Hello Kay,

I have one good advice for you. Do you have some average laptops to play
with?

If you do, please, install the following SW (CPU-Z) there (under
WIN7/8.x/10):  http://www.cpuid.com/softwares/cpu-z.html

Since I am reading many email (under few identities) from you. Please,
carefully explore the options under this tool, to try to understand most of
them, in order to explore deeper what you are asking here about? Deal?

Then you come back... With more questions.

Thank you,
Zoran


On Wed, May 25, 2016 at 7:56 AM, 김유석 책임연구원 <kay.kim at hansol.com> wrote:

> Dear Sir.
>
>
> My HW enginner required to me. that Change the setting of "Core input
> voltage".
>
>
> But, I don't know everything this one. Because x86 platform is first time
> of my develop life.
>
> Anyway, I'm try to find the something on coreboot source code.
>
> But, still unknow.
>
>
> So, I need a start point or key point that Initial code for "Core input
> voltage".
>
>
> Please advise to me.
>
> Thank you.
>
>
> --
> coreboot mailing list: coreboot at coreboot.org
> https://www.coreboot.org/mailman/listinfo/coreboot
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.coreboot.org/pipermail/coreboot/attachments/20160606/a34b3377/attachment.html>