[coreboot] Coreboot with Intel FSP on BayleyBay Help
Sean McNeil
seanmcneil3 at gmail.com
Sun Nov 2 14:20:15 CET 2014
You mentioned just copying the .fd file, so I assumed it was being used
directly in your coreboot image. FSP needs to be incorporated into
flash, yes. It should, however, be patched with the BCT program as what
is provided in the .fd is usually not patched with the a configuration
that you desire. Thus you should run bct and configure/patch the .fd and
generate a .bin to include into coreboot.
I am a little confused by your email below. You state that you are not
using the .fd directly then contradict yourself in the next sentence.
Bottom line is I would not include any .fd file from the FSP archive
directly. Use BCT to patch it and do not name it .fd. This avoids any
confusion regarding whether you are including a patched FSP or not. Just
because there is a bsf file included in the GOLD release doesn't mean
that the .fd was patched with those settings and that it is valid.
Best of luck to you. There are many issues you will have to resolve
dealing with new hardware. I've gone through the process with a lot of
support from Intel and it is not that easy. Especially when certain
components found on the CRB are not provided on custom hardware.
Cheers,
Sean
On 11/02/2014 08:01 PM, Gailu Singh wrote:
> Hi Sean,
>
> 1. This is not for a real project and we are trying to understand FSP
> interaction with coreboot to look at feasibility for considering
> coreboot in our future projects. Unfortunately I do not have board
> documentation so was not able to determine which one is serial port 0
> though I know that port 0 is specified in coreboot config. That was
> the reason I was trying on all 3 available ports.
> 2. I am not using .fd directly. I believe that FSP need to be included
> in bootloader (coreboot in this case) and we are providing path to
> coreboot so that it can be included in coreboot. In my original post I
> only said that I copied .fd to a path expected by coreboot
> configuration. May I know how did you conclude that I am using it
> directly? May be that can give me some pointer.
> 3. I had checked the bsf file in the FSP kit with BCT tool and it is
> configured for non-ECC RAM, so I believe that no change is required in
> .fd. Am I wrong?
> 4. Yes, I agree that there is no documentation available on how to
> create entire 8MB binary with Firmware Description, TXE, coreboot etc
> so for safe route I only touched upper 2 MB as recommended in one of
> the initial commit for baytrail FSP integration and some posts related
> to similar discussion.
>
>
>
> On Sun, Nov 2, 2014 at 3:49 PM, Sean McNeil <seanmcneil3 at gmail.com
> <mailto:seanmcneil3 at gmail.com>> wrote:
>
> Coreboot and FSP are not as easy to understand as you can see. I
> also would suggest that you seek assistance from either Sage (who
> has good experience that I understand serves the USA and Europe
> markets and contributed the current Coreboot+FSP code) or perhaps
> a company in Asia such as Zien Solutions (of Vietnam). There are a
> number of issues that you are failing to understand:
>
> 1) As stated, the first serial port is actually connected to a
> USB->Serial converter and delivered out of the microUSB connector
> on the CRB.
> 2) You need to configure the FSP with Intels program to create a
> ROMable image and not use the .fd file directly.
> 3) BayleyBay needs to be configured for non-ECC RAM whereas
> Bakersport needs to be configured for ECC.
> 4) You don't necessarily need the TXE security module, but you
> could very well cause problems if it is partially overwritten.
> Best is to create a correct 8MB image to flash that has the proper
> Intel Firmware Description block at the beginning.
>
> Regards,
> Sean
>
>
> On 11/02/2014 02:25 AM, Gaumless via coreboot wrote:
>
> First, the serial ports: The serial console is on the first
> serial port on the micro-USB connection.
>
> The 0x0000 on the post code display means that it's not
> actually starting to boot - it's probably hanging in the TXE.
> There are known issues with upgrading to coreboot from some of
> the bayleybay roms. I thought Intel was going to document
> that, but I don't know if they did.
>
> The Gold 2 FSP doesn't support D0 parts, so if you have a D0,
> you need the Gold 3. Also, the FSP is targeted at the
> embedded sku Baytrail-I. It might work with M/D parts, I
> haven't tested that.
>
> Assuming all that is ok, you probably need to start from a
> different rom. It might be failing because of the TXE
> security. You'll probably need to talk to your Intel contact
> to get that update.
>
> Finally, if this is not a personal project, you might be
> interested in contacting Sage and look at purchasing a BSP to
> get up and running. Either way, let us know whether you make
> progress or need more help.
>
> Martin
>
>
> On Nov 1, 2014, at 11:48 AM, Gailu Singh via coreboot
> <coreboot at coreboot.org <mailto:coreboot at coreboot.org>> wrote:
>
> Hi Experts,
>
> I am trying to boot BayleyBay CRB Rev 3 using coreboot and
> have no success so far. I have serial port (DB9) connected
> and using 115200 Baud Rate. No message comes on serial at
> all. Here is the procedure I followed.
>
> 1. Pulled latest coreboot from git.
> 2. Pulled following from BAY_TRAIL_FSP_KIT. The reason for
> doing it is that BAYTRAIL_FSP.fd is not in git and
> .config refers to it. Also .config refers to
> ../intel/cpu/baytrail/microcode
> a) created intel directory parallel to coreboot and
> copied BAYTRAIL_FSP_GOLD_002_10-JANUARY-2014.fd in to
> intel/fsp/baytrail/BAYTRAIL_FSP.fd
> b) Copied *.h from Microcode folder in the kit to
> intel/cpu/baytrail/microcode.
> 3. Configured the coreboot for mainboard as intel
> bayleybay. My .config is attached.
> 4. Build Coreboot. Below is the prints from cbfstool.
> cmos_layout.bin 0x0 cmos_layout 1132
> fallback/romstage 0x4c0 stage 27813
> fallback/ramstage 0x71c0 stage 67431
> fallback/payload 0x17980 payload 268859
> config 0x59400 raw 4363
> (empty) 0x5a540 null 744088
> cpu_microcode_blob.bin 0x110000 microcode 104448
> (empty) 0x129840 null 157528
> mrc.cache 0x14ffc0 (unknown) 65536
> (empty) 0x160000 null 393112
> fsp.bin 0x1bffc0 (unknown) 229376
> (empty) 0x1f8000 null 31640
> 5. Flashed the coreboot.rom in upper 2MB (0X0600000-0x07FFFFF)
> 6. Reboot the board
> 7. Nothing comes on Serial Console (DB9). Also tried to
> connect Micro usb cable which detects two serial ports but
> no output to any of them as well.
> 8. Before flashing coreboot.rom, 4 digit display was
> displaying something on two digits and rest two were zero.
> Now all 4 digits stays at zeros.
>
> Looking for help to get at least serial working so that I
> can get some logs to debug it. I do not have copy of
> original BIOS that was there in Flash and forgot to make a
> copy using programmer though I ensured that I only touch
> upper 2MB. I am stuck and have no logs to debug it.
>
> Thanks in advance.
> <my.config>
> --
> coreboot mailing list: coreboot at coreboot.org
> <mailto:coreboot at coreboot.org>
> http://www.coreboot.org/mailman/listinfo/coreboot
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.coreboot.org/pipermail/coreboot/attachments/20141102/f489950b/attachment-0001.html>
More information about the coreboot
mailing list